Programming a Nissan Altima Intelligent Key with Autel Maxisys ms906bt

[@mynamesjeff69]

Great video, I was about to give up because for some reason my brand new Autel IM508 key programmer kept failing to do the key registration, it kept saying it could be the incorrect pin code or the steering might be unlocked and if I would retry it it would say it failed to communicate with the ecu. Same thing happened with my Matco scanner. so I finally pulled out my old Autel MS906TS and it worked no problem... Thanks for the helpful video!

[@aigbeeromon1041]

I must say your video was very informative and I used the procedures to programme 2007 Infiniti G35 intelligent keys using the Autel AP200. Worked like a charm!

[@sarchavius1111]

HEY! i have the same car and my intelligent key stopped working. How difficult was it to reprogram?

[@aigbeeromon1041]

Very easy to program the key fob. It doesn't require a PIN code.

[@Gman9091]

Thanks man, the more info we can get on the sites units the better

[@GB-nu8fq]

I did this same procedure but only 1 remote out of 3 will work using the buttons and proximity. The other 2 will crank vehicle as long as it's in the slot. 2007 Altima. All aftermarket key fobs. Using launch x431 pro3s+

[@mikejohnson3379]

Can you up load a video for the newer model like 2018 Nissan great video by the way!!

[@achap3604]

Thanks bro please continue to share your knowledge

[@derekkchung]

I have a 2012 Altima all key lost. I have a autel maxisys elite + jbox. When I go thru the procedures, it says "acquire immobilizer pin for initialization from the following encrypted code...." And it shows a A6242 encrypted code and it is editable (meaning I can change it). If I proceed (with a 4-digit pin generated from the encrypted code by a generator) , it will say "The operation is incomplete." Do I have the right encrypted code? Do I need to get to the BCM to get the code? Why autel says "the following encrypted code, then allow you to edit it. Is the A6242 just a random code and I HAVE TO remove the dash panel to get to the BCM to get the code?

[@derekkchung]

@Vatslav Orlov Autel could not do it (for my 2012 altima. I ended up using a Launch X431. Autel has a lot of buggy but I am sure X431 also.

[@romeosautorepair2506]

Great man you should have more views and more comments what you have here is a very valuable information thanks. I have had a maxisys for a while but I need to use it more often. I need to learn from people like you thanks

[@4SGrounds]

Can i take a key that's registered to a nissan that i used to have and register it to another nissan that i want to get?

[@theone9564]

Have you programed nissan sentra 2020 intelligent key?

[@kingbolen_official]

Nice key programming video,I know Launch X431 V and diagun can do key programming on Nissan Ford Dodge and no need pin code. Some car model need pin model and to get a PIN number you have to have a LSID locksmith Identification.

[@anuragpandey7552]

How to the key programming, for nissan remote start key ?

[@xtremegamerz1]

Hey, not sure if you would know, but I have the same tool, same vehicle and the first try programming went through fine to initialize but failed during programming and now it's asking for a 4 digit pin but gives me the encrypted key.

[@alexarr3540]

What website you use or is it possible that you can decode mine , its 2571E

[@jesseplascencia4114]

J Kidd My friend has a 07 Nissan Altima and she lost her keys. I have a Autel MaxiCheck Mx808 scanner. She bought a key fob for her can not sure if I could program her new key fob.

[@jkidd9558]

I'm not sure about the model you are using. If you see immo as an option when you pluggin to the car then you should be able to

[@jesseplascencia4114]

J Kidd But do I need a PIN number and all that?

[@jesseplascencia4114]

J Kidd It does have the Immo option.

[@jkidd9558]

@@jesseplascencia4114 then you should have no trouble, just follow the steps provided in the video

[@jesseplascencia4114]

J Kidd But do I need the pin from the dealership or just plug and play, and follow directions on the screen?

[@stevephillips1243]

I have Maxisys MS906bt: It has the program for keys but would not program key, It did erase the opiginal key ugh. I Called Autel support and they said the MS906bt would not program any keys. They said you need an IM or better tool. How did you get it to work so effortlessly???? Signed FRUSTRATED!

[@jkidd9558]

Unfortunately the support member you contacted must be mistaken. It programs a select amount of vehicles and the Nissan altima is one of those vehicles. What happens when you try to program the key

[@Blaze90333]

I tried doing this but it’s asking for an Immobilizer code, what can I do?

[@CBRRR-eh3ky]

Smooth like a pro. What is vehicle coverage? Up to 2011 or up to latest models

[@jkidd9558]

The scanner gets updates on all models. When you buy the scanner the updates are free for a year. All year makes and models. After the year the update for another year is around 900

[@CBRRR-eh3ky]

@@jkidd9558 thanks for your prompt reply

[@robbocop33r12]

Was trying to program a key for a 2005 mitsubishi colt with my autel ms906.It gets to a point it asks for a password??Is this autel's term for a 'pin code'?I put in a generic mitsubish pin code,but the start of the key registration process timed out?Anyone advise on the Autel term 'password'?Thanks.

[@DanielB_718]

I have a question. What if I only have one key & the key turns on all the lights on the dash board. It also unlocks and locks the car but it doesn’t want to start it including the key light on the dash shows up. Will the autel be able to still program the key?

[@jkidd9558]

Yes

[@DanielB_718]

Thanks bro

[@kckuc310]

Can you decode mine I have 9F920? 2010 G37 my car is a brick

[@jkidd9558]

The pin code for your bcm is 1818

[@danieleyanae2265]

How can get one, and at what price?

[@jkidd9558]

They sell for around 1200 on Ebay, they come with some extras when you buy it there. I also purchased a maxiscope for mine off of offerup. You can find deals if you look for them

[@victornaja7927]

hey boss where did you get your scanner and how much are they going for. where ever you bought it from will they honor full warranty and does the free one year update does it come pre loaded let me know please

[@jkidd9558]

Amazon is where I purchased it. New it comes with one year of updates. Software will. Need to be update right away to work. Software is pre loaded on tablet. 1200 is probably the best price new. Well worth it

[@victornaja7927]

@@jkidd9558 so from date of receiving you'll update n you'll be able to update for one year right. Do you have to register it with Amazon incase scanner has issues. I'm just trying to figure out who I go to for related issues of scanner. Thanks for your time

[@jkidd9558]

@@victornaja7927 yes the updates are good for one year. The warranty from amazon prevents you getting a bad scanner. The warranty from autel is good for a year after. Either warranty I would assume would be good to replace the unit. I have never had a problem with it.

[@victornaja7927]

@@jkidd9558 thank you put me at ease thanks so much this helped me so I can finally buy one

[@Stage2_392]

Hey i have a Question. What do you do if all key's lost. You order a new key. How do you get the Vehicle to come on with the New Key with the Autel

[@jkidd9558]

For this type of vehicle all keys are erased by this process, even valid keys. In the video I state that all keys must be present at the time of programming or even the old keys will no longer work. This works like a all keys lost function

[@Stage2_392]

@@jkidd9558 No i mean the c/s lost all keys we ordered new ones. So when i stick the key fob(blank) in the memory slot how can i get the autel to turn the ignition on so i can read the ecu. With the new keys blank chip the ignition will not turn on.

[@jkidd9558]

@@Stage2_392 since I no longer have that vehicle I wouldn't be able to test it to find out. I believe just getting in the car, pressing the brake and the on button should power it on, it just won't start until the key is programmed?

[@Stage2_392]

@@jkidd9558 I Hope you are right i did order the wrong set of key's. I have the correct set of key' s today so i will try it hopefully it works.

[@jesseplascencia4114]

Do you need a programmed key to make the new keys work?

[@jkidd9558]

No

[@SlydenJr]

Hey I did this but ran into trouble I need to get a pin wonder how can I convert bcm code 0C1AE into pin I tryed searching online but get a mess

[@jkidd9558]

In the video I have supplied the names of the software that will convert the bcm code to the pin you need

[@jkidd9558]

What is your bcm code

[@jkidd9558]

4 digit pin code for your bcm is 7327. sorry for the late reply

[@ewauto]

can it work on a 2011 model?

[@jkidd9558]

Yes

[@willadams3110]

what was the programs you had up for the pin codes for newer nissans ?

[@jkidd9558]

Nissan super code and nissan pin code tool

[@turbot6592]

What bi directional functions is on this model

[@jkidd9558]

It varies by the model of vehicle, if you know what your looking for I can check for you

[@turbot6592]

@@jkidd9558 can this do commands for your evap system like turn your evap vent solinoid on and off. Will it do compression test on gm vehicles

[@jkidd9558]

@@turbot6592 yes on the evap systems, compression tests are usually a physical test with a compression tester. I am unaware of a test that is done without it.

[@michaelpatosa]

Does this thing have all the PIDS like CAM AND CRANK Live Data?

[@autodiagnostic7736]

Launch X431 Diagun IV have a better price for bi directional functions

[@upkarbath]

Thank you for sharing.good luck

[@markferraro5250]

thanks great job nice scanner top notch

[@randylahey5005]

Thank you !!!

[@grzesiek89231]

Thanks bro

[@langsonphiri4665]

I'm in Zambia Lusaka am luking this things ,y is that only develops countries have this!!

[@RAZEEWSD]

Because they are developed countries.

[@stevephillips1243]

you can buy from Amazon brother. about $1000.00 American dollars

[@AseelAlazwe]

video so

[@talongwatamaghislain9845]

Buddy speak loudly whenever you're recording this shit.

[@topeliteautosale7658]

please you need to talk louded,cant hear what you are talking about