Programming my remote Nice FLO2R

We will show you in this video how to program your Nice FLO2R remote control ! Click here bit.do/remote-nice-flo2r to order the product.
You can find a Nice FLO 2R remote control for your gate on Remotecontrol-Express.com by using this link : goo.gl/gz4BQ.

[@Remotecontrol-express]

You now know how to program your Nice FLO2R remote control ! To buy it on our website, please click on this link: bit.do/remote-nice-flo2r

[@markopavkovic7988]

Nice flo1re manual

[@greggski3710]

Just tried it on FLO 1 and FLO 2 remotes and works flawlessly. Thanks!

[@khunlim8621]

This is definitely working for my ON2 copy to FLO2RE remote. I followed exactly as the video said. I sat by the receiver at the corner of my gate and did it. The other videos which shows that you can simply put old and new remote facing each other and do a couple of presses on button 1 did not work for me. Thanks for this life saving video !!!

[@gyorgywachter8123]

after several try, it finally works. so do not give up, keep trying!

[@claudiuurea2712]

It worked like a charm, just paired a new remote from an old one. Thx!

[@frankiebenson3212]

Thank you very much Sir. worked first time and now have a spare .👏👏👏👏

[@ALAbySPALA]

Very helpful, got it on first try with both new controllers. Thank you!

[@Tiborcek]

Thanks for the instructions! I used the second method using the receiver and the LED didn't come off when it was supposed to (it started blinking instead), so I had to play it by the ear and after couple of tries it worked.

[@gandalfwiz20007]

Thanks for the help, i managed to program 2 remotes

[@arted0]

It’s working from the firs try. Thanks!

[@zhanzo]

Works perfectly!

[@Sasha777993sdiasd]

It's working!:)

[@borisvitez]

Working. Thanks.

[@alexandrugeorge1573]

Will it work with nice barriers? I have a nice barrier at my underground parking.

[@adiplt4917]

it works also with remote flor2re?

[@guido553]

Tip: Most important is, close to the thing you want to the receiver, so for example a door!

Its good method!

[@racebuddy]

Works ;)

[@bubu84pl]

Doesn't work for me. I tried with left button and nothing. Tried with right button and the control of the gate keeps on blinking but nothing happens after pressing the old remote button and then new button. Also the method with programing directly with receiver doesn't work.

[@anndimarco8752]

I've had to ditch two old ones as they could not be re-programmed.

[@relaxingmoments2you]

How about to programe nice flo to a homelink system? I can’t Find Any Information.

[@ryanB74]

if u don't succeed, try 5 sec. on new one, 1,2,3 on old one, then another 5 sec on new one (same butt) and wait 10 sec. it worked to me..

[@donjeuw9199]

Thanks for your answer, this sequence worked for me!

[@kerryrichards4987]

Yes this worked for me as well. I have the remote in the video and the newer version with the two larger buttons that are vertical.

[@elisabetarusu1029]

I tried the one from the video and didn't work and then I saw your comment and it worked as you said. Thank you so much!!!

[@RePapero1]

It fucking works!!! P.s. try more times

[@summerskyflower]

Működik, működik :D

[@toto1981]

This is a not working method! I can't copy from a working control to a new one!!!

[@hollymel9027]

Jonas e materiais

[@hollymel9027]

J Oi ge mateu

[@hollymel9027]

Canaã livre

[@hollymel9027]

Fora ditado

[@fakrulhossain2057]

It doesn’t work