Programming my remote NICE ON2E

In this video we will show you how to program your NICE ON2E gate remote control ! To order, click here : bit.do/remoteco...
- To program your remote on the reciever :
• You need your NICE ON2E remote control and the NICE OX2 reciever
• Press and hold down the programming button « P1 » on your receiver. The LED on the reciever flashes.
• Release the pressure.
• Press and hold down the button you wish to program. The LED turns off.
• Release the pressure.
• Wait for one second then press and hold down the same button you wish to program.
The LED on the reciever flasshes three times.
• Wait for 10 seconds
Your remote control is now programed.
- To program your new remote control with an already programmed remote (self-learning) :
• Take your already-programed remote control and the remote control you need to program.
• Press and hold down the button you wish to program for 5 seconds.
• Then, slowly press the already-programmed button three times on the old remote control and wait 1 second between each pressure.
• Finally, press and hold down the button you wish to program on the new remote control.
• Release the pressure. Wait for ten seconds.
Your remote control is now programed !
Feel free to leave a comment or to ask for help if you face any problems when programing your remote control. We will be happy to answer all your questions.
And don’t forget to give us a little blue thumb if you are satisfied with the video !
Remote control Express, the world within arm’s reach !

[@nacerzaoui6370]

best tutorial out there i apreciate the details. i was doing it wrong for hours until i heared you say stay close to the receptor at least 2 meters. thx you much

[@miricavali9972]

Method 2 works! Thank you!

[@leszekpierzynski4121]

Very helpful and easy to follow video. Second method works perfectly, thanks.

[@ewenmchardy5157]

Thanks, clear and concise, managed to programme 2 key fobs successfully. A must do - be close to the receptor to programme, otherwise it won't work. Very good video!

[@kimduggan7631]

Thank you thank you … it worked and we are so grateful and happy 😃

[@RafSid-x3o]

Can I copy on a nice remote,any other brand of remotes?my second garage door hasn't a nice receiver.is it possible to use the nice remote to control both doors with the second button for the other door..?

[@ellierentoul490]

THANK YOU for a fantastic, clear video. I managed to set our remotes very quickly and correctly. :-)

[@viken1461]

Hello! Thanks for the video, do you know it can work to program a Nice one2 from an already programmed Genius remote control?

[@jasam9110]

HI, I did the 2nd method and I got the new one remote working but it stopped to work day after. Tried 3 times and it always stips working. Do you have any solution to this?

[@VonnieSpencer629]

I WISH MINE WAS THAT SIMPLE. I HAVE SHUTTERS ANS AN ERGO 6 REMOTE. AND THERE AREN’T ANY VIDEOS ANYWHERE ONLINE ABOUT THIS REMOTE, LET ALONE PROGRAMMING IT. BEEN WORKING JUST FINE FOR 3 YEARS, YET A COUPLE WEEKS AGO. I GET THE REMOTE AND MOVED THE SHUTTERS UP AND DOWN ABOUT 3 TIMES TRYING TO GET THEM IN THE PERFECT SPOT. ALL I KNOW IS SOMETHING TRIGGERED THE SHUTTER TO GO UP AND IT WOULDN’T STOP OR COME BACK DOWN. I ASSUMED THE BATTERIES WERE DYING SO I GIT MORE AND REPLACED THEM. WELL WHEN I DID THAT. THE RED LIGHTS CAME ON AND WENT OFF AFTER ABOUR 20SECONDS. THEN NOTHING LIGHTS UP NO MATTER WHAT I PRESS! JUST WONDERING IF YOU KNOW HOW TO CORRECT THIS. THANKS.

[@mouhanad1722]

Very helpful and accurate

[@haileysralik3025]

We had to buy a new nice ON2E/A remote for our 2011 Apollo 1550 gate opener and we can’t get the new remote to work. We have followed the directions exactly and the receiver will only blink 2 times instead of 3 to indicate that it was successful. Any suggestions?

[@relaxingmoments2you]

Can this remote be programând to homelink ? If Yes.. how can i do.

[@666brodski]

Nice

[@JBW78133]

How can I override the auto close?

[@BateDjole]

It works, thank you . 🙂

[@millerk420]

Can you program the second button for the programmed lock code from the keypad?

[@ERPIUS]

ciao io ho due telecomandi nice one di due cancelli diversi uno a 2 tasti e l'altro a 4 tasti e possibile programmare il secondo cancello sui rimanenti due tasti del telecomando a 4? ho provato piu volte mettendoli uno fronte all'altro ma nulla ... i telecomandi sono un Nice one 2 e un Nice one 4 se tengo premuto uno con l'altro i telecomandi comunicano ma è come se non registrassero il primo (2 tasti ) e stato registrato stando in prossimita del cancello della sede il secondo ( 4 tasti ) e stato registrato tramite con la centralina ( cancello di casa mia) idee su come averli entrambi? se continuasse a non andare dovrei provare una cancellazione totale e poi una programmazione prima con quello della sede su due tasti e poi su quello di casa anche se fosse tramite centralina sul motore? grazie per la futura risposta

[@Androcentus]

NOT working...bs