Programming Walthers 130 Turntable Part 17 "Model Trains"

  Рет қаралды 16,213

csxmad

csxmad

Күн бұрын

Пікірлер: 67
@peterhall4086
@peterhall4086 Жыл бұрын
Great vid, I have just bought two turntables, and am buying this unit along with the motor etc. Thanks for the instruction.
@csxmad
@csxmad Жыл бұрын
Glad I could help, and i hope all go's well for you cheers Robert
@9501599
@9501599 4 жыл бұрын
Just spent some time watching this series of videos. I am building the same model but 9 stalls, this has given me some great ideas for my model. Really enjoyed this series cheers.
@csxmad
@csxmad 4 жыл бұрын
I hope you got some good idea's and thanks for commenting cheers Robert
@brian102256
@brian102256 5 жыл бұрын
Hey Robert! Lots of precision modeling required for this project. Nice work as always! Love the control box as well. Thanks also for the detailed explanation of how the turn table is programmed and operates. - Brian
@csxmad
@csxmad 5 жыл бұрын
Brian really enjoyed this build and hope it doesn't give me problems cheers Robert
@Building_America
@Building_America 5 жыл бұрын
Thank you for the tutorial video Robert. You gave me a few ideas for my layout. The turntable and roundhouse look fantastic!
@csxmad
@csxmad 5 жыл бұрын
Hope you got something from this but at least it works for now cheers Robert
@howarth004
@howarth004 5 жыл бұрын
Great when it all works , well done Robert ...you did a great job on this project ..
@csxmad
@csxmad 5 жыл бұрын
David your right works well now cheers Robert
@davestrains6816
@davestrains6816 5 жыл бұрын
Great video Robert. Your builds are truly amazing. Thanks for sharing.
@csxmad
@csxmad 5 жыл бұрын
Thanks Dave and they are good when they work out lol cheers Robert
@SFRATON
@SFRATON 5 жыл бұрын
Well done Robert, thanks for a great intro to programming the turntable.
@csxmad
@csxmad 5 жыл бұрын
Kevin was good to learn it myself as well cheers Robert
@davidmuse7004
@davidmuse7004 5 жыл бұрын
Robert nice work on the turntable!! That's not a complicated as I thought it would be, very nice demo. Thanks for sharing Muse
@csxmad
@csxmad 5 жыл бұрын
Muse was ok to use and if i can anyone can cheers Robert
@richarddewey6752
@richarddewey6752 5 жыл бұрын
Thank you for another fine video. The locomotive was very smooth getting on and off.
@csxmad
@csxmad 5 жыл бұрын
Thanks Richard i appreciate it cheers Robert
@choochoo3985
@choochoo3985 4 жыл бұрын
Thank you for showing this as I am installing one of these turntables at this time.
@csxmad
@csxmad 4 жыл бұрын
Hope this has helped cheers Robert
@markcrocker934
@markcrocker934 5 жыл бұрын
Good explanation Robert. Looks really neat and cool way to turn locos. Mark
@csxmad
@csxmad 5 жыл бұрын
Mark works great for now lol cheers Robert
@DruSteel69
@DruSteel69 5 жыл бұрын
Very cool, Robert. Thanks for sharing the process. Can I be the valet person to park and pull up engines for ya? Ha ha - Drew
@csxmad
@csxmad 5 жыл бұрын
Drew the job is yours lol but the pay is not great lol cheers Robert
@DruSteel69
@DruSteel69 5 жыл бұрын
ha ha. Cool!
@choochoo3985
@choochoo3985 4 жыл бұрын
Question; When you run the loco on to the turntable it is facing away from the head. Then you put it in the roundhouse. Then bring it right back out and turn the loco so it will reenter the same track in the opposite direction. I would assume that you are now going to short out as the polarity is reversed entering the main track. ??? How does the locomotive avoid shorting out?
@csxmad
@csxmad 4 жыл бұрын
The Turntable changes the Polarity as it turns around, so it doesn't matter which way the engine is facing, or which track you use. If you have more than one track exiting the Turntable as long as you have the same colour coded feeder wiring, also there is a dead track in the turntable as it turns a full circle, this is when your power will shutdown and re- start, hope this helps cheers Robert
@choochoo3985
@choochoo3985 4 жыл бұрын
@@csxmad Thank you. Ted
@TheShadeTreeFixitMan
@TheShadeTreeFixitMan 5 жыл бұрын
Fun stuff. I can only imagine doing some actual work with it. Keep the videos coming Robert.
@csxmad
@csxmad 5 жыл бұрын
George this will be fun stuff lol cheers Robert
@dundasjunctionmodelr.r-jam8267
@dundasjunctionmodelr.r-jam8267 3 жыл бұрын
Robert, I am looking into installing the 90 ft version, do I need the other control circuit board to operate, I am using DCC but only want use the same controller panel that you installed
@csxmad
@csxmad 3 жыл бұрын
James, these are the models that this control box can use Turntable Control Box -- For 933-2851, 2859, 2860 and 2618 Turntables Only
@dundasjunctionmodelr.r-jam8267
@dundasjunctionmodelr.r-jam8267 3 жыл бұрын
Robert track power is DCC , working on idea to install one this year , thanks
@csxmad
@csxmad 3 жыл бұрын
@@dundasjunctionmodelr.r-jam8267 James your track maybe dcc but you need a turntable that is DCC, some are only DC Hope this helps cheers Robert
@dundasjunctionmodelr.r-jam8267
@dundasjunctionmodelr.r-jam8267 3 жыл бұрын
Yes planning on the 933-2860
@dundasjunctionmodelr.r-jam8267
@dundasjunctionmodelr.r-jam8267 9 ай бұрын
Hello Robert 4 yrs has passed, new layout, 110 ft turntable installed now I need to program , watch your video again
@KerleyExpress
@KerleyExpress 5 жыл бұрын
Boy oh boy I well never learn that lol Your doing great thank you for sharing
@csxmad
@csxmad 5 жыл бұрын
Dwight if i can do it anybody can cheers Robert
@richardredcastle7911
@richardredcastle7911 5 жыл бұрын
That's a newer controller unit than mine and the HEAD and TAIL mode is much easier to figure out than seperate track numbers for each end. I wonder if I can upgrade....
@csxmad
@csxmad 5 жыл бұрын
Richard yes you can buy these but weather they are compatible i don't know. I have the old one for the Transfer Table as well cheers Robert
@Hornhausen
@Hornhausen 5 жыл бұрын
Amazing.
@csxmad
@csxmad 5 жыл бұрын
Thank you cheers Robert
@kyontiger5726
@kyontiger5726 5 жыл бұрын
Thanks. Great series on turntable and roundhouse. Can you tell me where you got the LEDs for the pits and the overhead lights in the roundhouse.
@csxmad
@csxmad 5 жыл бұрын
This is the link for the ceiling lights www.ebay.com.au/itm/50-pcs-HO-OO-gauge-Ceiling-Lampposts-LEDs-made-telpher-lights-hanging-Lamp/253460348747?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 but the pit lights they don't stock anymore but these look the same www.ebay.com.au/itm/DD00W-20pcs-Pre-Wired-Bright-White-SMD-3528-Led-Lamp-Light-Set-12V-18V/254170492651?hash=item3b2dbdeeeb:g:73IAAOSwKqNckZMx
@MrAmf4me
@MrAmf4me 3 жыл бұрын
Will this controller work on Walthers 933-3171 if not is there a controller?
@csxmad
@csxmad 3 жыл бұрын
No, Cornerstone Turntable Control Box -- For 933-2851, 2859, 2860 and 2618 Turntables Only
@rickeyhenry1951
@rickeyhenry1951 5 жыл бұрын
Any videos on how you wire it up to your dcc?
@csxmad
@csxmad 5 жыл бұрын
This one should help on how i wired this turntable cheers Robert kzbin.info/www/bejne/l4u4ioJjeammfqM
@apmazurka
@apmazurka 5 жыл бұрын
Very Nice Robert. I am not even close to programming my turntable but this should help. My Panel is all grey and Not blue, Maybe an older version? Andy M
@csxmad
@csxmad 5 жыл бұрын
Andy you would think they are all the same cheers Robert
@apmazurka
@apmazurka 5 жыл бұрын
@@csxmad mine doesn't even have a number screen. Going to have to scrap it lol. Cheers Andy M
@csxmad
@csxmad 5 жыл бұрын
@@apmazurka Now that a first no numbers
@apmazurka
@apmazurka 5 жыл бұрын
@@csxmad Must be an older model, Now Thanks to you I want the Newer version LOL. Cheers Mate Andy M
@MMRails
@MMRails 5 жыл бұрын
Smoooth operation Robert. Looks great. I love the box you built for the control, but may I ask why so big? I’m thinking of building something similar for my controls.
@csxmad
@csxmad 5 жыл бұрын
Mark i like everything big lol cheers Robert
@davidverschage5617
@davidverschage5617 3 жыл бұрын
Are you going to add Walthers Advanced Control Module 933-2321, watch and installed 130’ turntable, wouldn’t have completed without your videos, thank you. Yes I’ve hit the button some years ago on your Christmas channel
@csxmad
@csxmad 3 жыл бұрын
David no to the Module, and did you use it? cheers Robert
@richardswallow1967
@richardswallow1967 5 жыл бұрын
Nice turntable, can I ask would it work on 00 gauge?
@csxmad
@csxmad 5 жыл бұрын
Richard this will work for HO and OO cheers Robert
@dwightatnorthernstar1820
@dwightatnorthernstar1820 5 жыл бұрын
Pretty cool eh? But Istill need the instructions nearby because I don’t use it that often, Thanks
@csxmad
@csxmad 5 жыл бұрын
Yes cool is right on cheers Robert
@fastoutnotforkids7192
@fastoutnotforkids7192 4 жыл бұрын
Do you run DC or DCC? Also im new. So hellooo.
@csxmad
@csxmad 4 жыл бұрын
And hello back, i run DCC cheers Robert
@davidwilliams40
@davidwilliams40 5 жыл бұрын
Robert I just had Dianne ask how does he figure all this out I told her I dunno he`s your brother lol no I told her it was most likely you have instructions on how to do it
@csxmad
@csxmad 5 жыл бұрын
David no instructions all in the head lol cheers Robert
Will A Basketball Boat Hold My Weight?
00:30
MrBeast
Рет қаралды 127 МЛН
НАШЛА ДЕНЬГИ🙀@VERONIKAborsch
00:38
МишАня
Рет қаралды 3,3 МЛН
У вас там какие таланты ?😂
00:19
Карина Хафизова
Рет қаралды 13 МЛН
Kato SD90/43MAC ESU Loksound conversion
17:19
DanB80TTS
Рет қаралды 310
Walthers 130’ DCC Turntable
11:22
MAYNE_line
Рет қаралды 6 М.
Hill construction and ground cover
3:28
The Great Buckeye Western railroad
Рет қаралды 16 М.
Walthers Turntable Install Part 1
13:47
Charles Nelson
Рет қаралды 8 М.
Programming the Walthers 130' None DCC turntable.
23:22
Sean Moore
Рет қаралды 9 М.
How to: Walthers 130' DCC Turntable - Basic Info and Install
11:41
The Train Freak
Рет қаралды 9 М.
ДОГОНЯЛКИ В АВТОБУСЕ? 🤔
1:00
BBUS. БизнесБас. Пассажирские перевозки.
Рет қаралды 1 МЛН
We install the auxiliary340.8K ... air suspension on Renault Master X70
0:37
Best Mechanics Around the World
Рет қаралды 14 МЛН
Ваш автомобиль трещит по утрам? Пора на сервис
0:48
Автосервис Мерседес MBSEMENOV
Рет қаралды 2,3 МЛН
СВАРЩИКИ🎇СДЕЛАЛИ НЕВОЗМОЖНОЕ😱
0:30
lolgenerate | Top Shorts
Рет қаралды 2,4 МЛН