Programming your MultiPlus or Quattro with Victron Connect

[@bruceh3786]

My Android Victron Connect app on the phone only gives me very limited access to the inverter settings. The Settings are not near like what is shown in the video when using the Victron Connect Windows program.

[@pkysinc]

You have to do this on a computer

[@silvanocometta9760]

Thanks for the interesting video. As I do see my Multiplus on VRM but not on the Victron Connect app, as in your case, what do I have to do to see it in the app?

[@pkysinc]

This video describes programming the MultiPlus locally using your laptop and Victron Connect. While it is possible to do this remotely over the VRM it is for advanced users and uses a different program. I wouldn't recommend trying it until you have become thoroughly familiar with doing it locally first. We don't give out the instructions but you will find them in the VRM Portal Documentation

[@pkysinc]

You have to connect it to your computer using the Mk3 USB interface

[@buddyt4447]

Do you know why the readings from the current transformer wouldn’t show on the grid box in remote console when plugged into current sense port?

[@pkysinc]

You have to set this up in programming using the "Assistants"

[@buddyt4447]

@ I have ess assistant running is there another one to use with that one?

[@a2022z2]

Question regarding power assist. Power assist means you are using two power sources. In some countries in Europe, using two power sources is not allowed. What is the code in USA and ABYC view on using two power sources at the same time?

[@pkysinc]

This application is permitted in the US. We are augmenting the incoming power but we are never sending power back to the grid.

[@buddyt4447]

What is the best way to prevent sending power back to the grid with split phase two 48 5000 inverters?