This guy is so easy to understand he's straight to the point on how to fix the problem
@DanielStaggs3 жыл бұрын
This was made perfectly for someone doing this the first time. Very well made video.
@PYR-Auto3 жыл бұрын
Thanks! Happy it helped
@kenboi1692 жыл бұрын
Great explanation video. Well done. One Caution though is when removing the elastic dampening cord (30-second point), don’t just let the cord spring back as shown in the video. My bad luck had the connector piece drawn back and got caught on something behind the plastic frame. It took about 45-minutes of frustration retrieving it. Best to unhook the dampener from the glove box and gently let it retract to its resting point while holding it. Otherwise about a 10-minute process to complete.
@aarunanjay2 жыл бұрын
I tried to be mindful of this, and I can totally see how this could happen. There wasn't enough room for me to safely let it go and I just lucked out that it didn't catch something.
@hawkeye18932 жыл бұрын
Well, look who should've read this before he let his dampening cord snap back... (this guy, this guy should've read this)
@schroeder649 ай бұрын
I also didn't read this before doing it. It also took me about 45 minute to retrieve the dampening cord.
@SmokinLoken2 жыл бұрын
Don't just pull on the push pin. You'll break it. When removing the cover, push the center of the push pin in and the entire thing will come out easily. When putting the cover back on, push the center of the pin out (opposite direction from before) and you can easily secure it in the hole.
@manasseh7487 Жыл бұрын
Thanks. I watch that and jumped like seeing someone getting hit by a car! Went directly to comments to find the correct way to detach it.
@daleair2012 Жыл бұрын
Not sure what you mean by this? How can you push the center in while at the same time trying to pull it out?
@SmokinLoken Жыл бұрын
@@daleair2012 Once you push the center of the pin in, you can use a screwdriver or something to pry the head out and the entire thing will easily pop right out.
@manasseh7487 Жыл бұрын
@@daleair2012 pushing in the center pin while holding the fabric and then pulling out. The fabric is loose. Once and after that, you can pull the pin out and install the same way after you're finished.
@FixitMys3lf Жыл бұрын
@@daleair2012 When you push the center in, it collapses the expanded plastic feet of the grommet. This makes the grommets feet/wings/whatever they are called to have a smaller diameter, allowing you to then remove the grommet by the pulling on it, not on the felt fabric.
@haydendoan76913 жыл бұрын
Thank you. This is the best video of the ones on KZbin!
@PYR-Auto3 жыл бұрын
Thanks!
@briangarvey68958 ай бұрын
Made the process simple and easy. A great video. Thank you very much for posting this.
@PYR-Auto7 ай бұрын
You're Welcome! Glad it helped!
@willonthewing28602 жыл бұрын
Thanks for the video. You showed releasing the clip on the right side, but you must also release the clip on the left side in the same way, or you are likely to break the clip on the left side (as I did). If you do break one of the clips (which seems likely to occur at this or a later change), you can use a couple of good rubber bands wrapped from left-to-right across the front to hold the cover in place.
@tjs48133 жыл бұрын
Well done! Clean, concise, and helpful with all the lil Chrysler quirks
@PYR-Auto3 жыл бұрын
Thanks!
@razvanpoenaru Жыл бұрын
very well explained, I was looking for 2022 Grand Caravan where is similar, but that cover is missing so it's one step less
@mikevv75422 жыл бұрын
Very helpful… our filter is now replaced thanks to you!
@PYR-Auto2 жыл бұрын
Glad it helped!
@djrosa7732 жыл бұрын
Awesome, thank you so much for the great video I really appreciate it I'm doing that today it's guys like you that keep us all rolling man thank you
@PYR-Auto2 жыл бұрын
Our pleasure!
@dakshots Жыл бұрын
excellent demonstration. Thank you!
@PYR-Auto Жыл бұрын
You're Welcome!
@JeffMonasch Жыл бұрын
Thank you. Very easy after watching your video.
@PYR-Auto Жыл бұрын
You're Welcome!
@aquilinobenitez50554 жыл бұрын
Best video on this process yet. Thanks
@PYR-Auto4 жыл бұрын
Glad it was helpful!
@GARY-fromOntario2 жыл бұрын
FANTASTIC INFORMATION. saved me 💲💲🍻from ONTARIO 🇨🇦
@PYR-Auto2 жыл бұрын
Glad it helped!
@maxshrike3 жыл бұрын
Straight to the point, excellent job describing the process
@PYR-Auto3 жыл бұрын
Thanks!
@manasseh7487 Жыл бұрын
Thank you for the instructions. Very helpful!
@PYR-Auto Жыл бұрын
You're welcome!
@smoke1506 Жыл бұрын
Thanks I just started my new job working on cars and this helped alot
@PYR-Auto Жыл бұрын
You're Welcome! Glad it helped
@tracybaumann4130 Жыл бұрын
Extremely helpful. Thank you!
@PYR-Auto Жыл бұрын
You're Welcome! Glad it helped
@marciastanton-vr7ml Жыл бұрын
Very helpful! Thanks for all the details.😊
@PYR-Auto Жыл бұрын
You're Welcome!
@DatSQ52 жыл бұрын
I'm hopefully buying a 2017 Pacific Touring-L tomorrow and stuff like this will definitelyyyyy help. Thank you for your videos bro. Definitely got a new subscriber here :)
@PYR-Auto2 жыл бұрын
You're Welcome! Good luck with the new car!
@JL99ish2 жыл бұрын
Thx!! Just did this in about ten minutes or less!!
@PYR-Auto2 жыл бұрын
Great! You're Welcome!
@LOSCABOSLIFE Жыл бұрын
Excellent explanation , thank you!
@PYR-Auto Жыл бұрын
You're Welcome!
@FeldmanJazz3 жыл бұрын
Thank you! You made it easy!!!
@PYR-Auto3 жыл бұрын
You're welcome! Happy it helped
@marcia.14633 ай бұрын
great job explaining thank you
@PYR-Auto3 ай бұрын
You're Welcome! Glad it helped
@amberp65833 жыл бұрын
Great, easy-to-follow instructions! Thank you!
@PYR-Auto3 жыл бұрын
You're Welcome! Glad it helped
@Willy-Wind2 жыл бұрын
Do you need to bend the old filter a little bit to take it out and the new one to put it in? That is what I needed to do.
@PYR-Auto2 жыл бұрын
I think I did have to bend it a little bit to get it to come all the way out
@TEXMEXLEX12 жыл бұрын
I had to bend mine more than I would have liked - seemed to be misaligned by an inch or so
@andreapoole47789 ай бұрын
Thank you so much for this video!!
@PYR-Auto9 ай бұрын
You're welcome!
@kenhugen2852 жыл бұрын
Very helpful! Thanks for a great video!
@PYR-Auto2 жыл бұрын
You're Welcome!
@tpotier11922 жыл бұрын
Excellent video. Thank you
@PYR-Auto2 жыл бұрын
Thanks!
@genebinion2 жыл бұрын
Appreciate your information! Thank you!
@PYR-Auto2 жыл бұрын
You're Welcome!
@JiveTurkeyAndMe3 жыл бұрын
Perfect video.. absolutely perfect!
@PYR-Auto3 жыл бұрын
Thanks!
@thomasrach12 жыл бұрын
Thank you well bone vary clear to understand
@PYR-Auto2 жыл бұрын
Thanks!
@LisaNinnymuggins2 жыл бұрын
Excellent! Thank you so much!
@PYR-Auto2 жыл бұрын
You're welcome!
@aarunanjay2 жыл бұрын
Very helpful.
@PYR-Auto2 жыл бұрын
Glad it helped!
@nikoswans7657Ай бұрын
Very good thank you
@PYR-AutoАй бұрын
You're Welcome!
@jfoquendo Жыл бұрын
Thank you !
@PYR-Auto Жыл бұрын
You're welcome!
@zehuazhou33902 жыл бұрын
My AC smells bad. I want to buy some cleaner foam to clean the evaporator. I wonder if I can remove the cabin air filter and shoot the cleaner foam into that whole? Most cars have the evaporator right behind the cabin filter.
@amberhicks25122 жыл бұрын
When I pulled my filter out, it was sideways with the writing to the right, does it need to be facing out like you did?
@PYR-Auto2 жыл бұрын
not necessarily, that would probably only apply for sure if you have an OEM factory filter - the writing on the filers can vary depending on brand.
@PHHussler6 ай бұрын
Thanks.
@PYR-Auto6 ай бұрын
You're Welcome!
@rexisretro Жыл бұрын
Thanks
@PYR-Auto Жыл бұрын
You're welcome!
@chrisrausa65982 жыл бұрын
By chance have a video on how to replace the blower motor?
@PYR-Auto2 жыл бұрын
I do not, sorry
@JerryDodge-d5f Жыл бұрын
Thanks. .
@PYR-Auto Жыл бұрын
You're Welcome!
@samgreen19632 жыл бұрын
How often should this be changed?
@PYR-Auto2 жыл бұрын
The car manufacturers usually recommend 10k - 15k miles or about once a year. I usually just check them out visually and go off how dirty they are.
@markrine5368 Жыл бұрын
Mine didn’t seem to have a cord to attach
@danphillips35803 жыл бұрын
Voyager are the same?
@PYR-Auto3 жыл бұрын
yes I believe they are the same
@alyssascott61903 жыл бұрын
Where is the best place to get an air filter?
@PYR-Auto3 жыл бұрын
Online is probably the cheapest route but I usually just buy them at a local auto parts store so I don't have to wait for shipping. Most auto parts stores (O'reileys, Autozone, Advanced Auto Parts, Napa, etc. ) should have these filters in stock.
@gorgemetz80623 жыл бұрын
I paid how much to have this done? Oh brother.
@Donaldwomble3 ай бұрын
You are wrong mine is under the glove box
@JBenitez9113 жыл бұрын
Dealership wanted 99$ to do this 2min task.
@PYR-Auto3 жыл бұрын
unfortunately that's not surprising
@otbruce1 Жыл бұрын
My dealership in San Leandro, California wants $145.