Project 0136 | Making a gasoline pulse Jet Engine

Thanks to Established Titles for sponsoring this video! Go to establishedtitles.com/makeite... to shop their Black Friday Sale, plus get an additional 10% off on any purchase with code makeitextreme and help support the channel!
Having no experience in this particular area, it is the first time that we are going to work with such project. We got some knowledge and inspiration, from an expert in the jet engines domain, @RobertMaddox. We decided to make our own pulse jet engine, that we are going to use on a bike in our upcoming project.
►All details about the video: bit.ly/3QDYaFd
► Get the plan: bit.ly/4bwMo7u
► Linktree: linktr.ee/makeitextreme
00:00 Project introduction
03:39 Making thread for spark
04:48 Air intake hole
05:08 Milling a reed valve base
09:30 Gasoline nozzle base
11:23 Fuel nozzle on the engine
11:41 Fuel pump test
12:05 Fuel tank
12:53 Complete the fuel system
14:15 Milling the reed valve body
17:40 Complete reed valve
18:56 Engine start
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3IgWU4G
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.com/shop/makeitext...
-----------------------------------------------------------------------------
Click here to Subscribe: bit.ly/MakeitExtreme
Second Channel: bit.ly/MakeitExtremeShorts
Facebook: bit.ly/Makeitextreme
Instagram: bit.ly/makeitextreme
TikTok: / makeitextremeshorts
Welding Machines:
Mig: bit.ly/Rallymig
Tig: bit.ly/PITIG
►Special Thanks to our new Patrons:
TOP (Jakob Keller)
charles thompson, Steve, Baron van Oosting, Alif Haiqal, jeff hayes,
Michael Kubic, Jony Berrio Román, Alexandros, Shawn Berlinghoff,
Desmond Claassens, Kracodan, David L Badion, Santiago Ricoy,
Tyler Olson, Valdas Būdvytis, safi abdullah, Víctor Hernández,
ruben, william, Pandaking, Ernesto Sesma, mingle, Clement RONDOT,
Robert Baker, Cuauhtemoc Escudero Torres, Frank Schütz
Find our Plans Here: / makeitextreme
Music from Artlist: bit.ly/MIEArtlist
(Subscribe now and get an extra 2 months on your subscription)
#makeitextreme #makeitextremeshorts

[@TheDrakenZ]

Now we wait for Colin Furze to comment :D

[@ShaunO1225]

I'm waiting for Integza to see this

[@E.L.M685]

Engine failure

[@brandenhoolehan7149]

I think there needs to be a race between integza, Colin, and this guy. Any fuel, any size pulse jet, any body type.

[@papakrakazyabrika]

Фёрз ребёнок в подобных двигателях 😂😂😂

[@khupan.ttikhir384]

​@@ShaunO1225 aaaa

[@barthanes1]

Cool project. Those things are loud. I've seen you do some dangerous stuff, but spraying atomized gasoline next to bare wires on a battery takes the cake.

[@adamchittenden1500]

I held my breath on that clip

[@flomojo2u]

No joke, I've seen some reckless things in my time, but misting gasoline into the air while manually connecting/disconnecting the fuel pump wires to a battery a foot away is staggeringly dangerous. You are always going to get sparks connecting a motor to a battery, it's just a matter of how big.

[@tenlittleindians]

My guess is diesel fuel or kerosene and neither catch fire very easy.

[@AceNinja2112]

You are an amazing metal worker!!! Plus, your videography of the construction is highly entertaining and satisfying!

[@duke1467]

We built these when I was a kid. The valve is much different but functions the same way. Thanks for bringing back such great memories.

[@AChicken-sh1gc]

tf kind of kid were u ? i mean im still a kid and did similar stuff but i never managed to get my hands on tools and material but still im surprised im not the only kid who did this

[@duke1467]

My family owned rental stores and had some amazing bikers working for us.They had some real skill when it came to repairing or making just about anything and they liked that a little kid wanted to learn. So I did.@@AChicken-sh1gc

[@oomwat6101]

Best 'Established Titles' ad ever ... nicely done Sir.

[@posi_de]

Don't fall for their scam please...

[@kaosthecosmicreviewer1055]

another piece of expert craftsmanship gentlemen, well done. I assume there will be further refinements in the future.

[@nathankirby899]

I haven’t seen any of your videos in ages but I’m glad to see you back

[@JazzbLu]

FINALLY! Someone made a gasoline pulse jet! Thank you and totally awesome build!

[@gdfgfrd]

Looks great! You are a brave man if you are testing the jet engine while standing next to it without protective suite

[@GBWM_CNC]

Your machining skills and video editing are both just perfect. You do really inspire me!

[@user-tr7ge6hm3q]

Yes

[@court2379]

I made two of these in highschool. That valve block is likely to melt being aluminum. ask me how I know... You may need to change the tube length as well to get the right resonance. Was it based off any existing plans, or just winging it?

[@owltube-4036]

18:30 I was surprised by the sensuous mold technique in this video. It's a great video.

[@cadenbecker2952]

awesome project just one concern is the compressed air hose for the fuel line which will swell with contact to gasoline, if the pump is under 20 psi (which it looks like). Normal fuel hose with work but an efi pump 200-300 psi will need efi fuel hose. Cant wait to see what this goes in

[@andrewneill9873]

Wow!! Insanely impressive engineering and quality video. I love your work...

[@b00573d]

@integza would love this!

[@TrakaBat]

Wow 👌 👏 that is awesome and I appreciate what you did with the insignia on the tail fins. Well done.

[@lefteris-3E]

Καλό χειμώνα κοριοί. Και καλές πατέντες εύχομαι. Πάντα υγεία.

[@jerrysanchez5453]

Most youtubers would have turned this into a 20 part video series.i respect it

[@user-wx4mn8nd4s]

Excellent work, amigo!

[@damenekamel5063]

it was one of my dreams to do what you did absoluntely amazing well done my friend

[@Sp00kq]

Don't let them be dreams. Do it. None of this fancy equipment is required to make a functioning pulse jet. All you really need is a drill, used can of aerosol spray, metal pipe, and a fuel source. Im gonna make a basic one tomorrow morning

[@DanKoning777]

With pulse jet engines still being used today I can't wait to see this [or a modified version of this], on a future build of yours. According to my research, 70 to 100mph is the "norm to expected range" for these engines. Looking forward to seeing what the "Extreme" speed range is. 😁*Well done* and *God bless* as always.

[@dragonrider6875]

Ok I know you all make crazy inventions and rides. I am ready to see what you all put that on.

[@smokeandsteamxsw9831]

😅i love to watch a craftsman bring thoughts to life. Amazing!!!!!

[@mmccab]

Gotta love the part where you test the gas atomizer in the open room with the battery connection held by fingers. Apparently you assistant didn't arc the end of those wires with that gasoline mist in the air. The video may have been shorter, if so.

[@nightwalker5278]

Wow!!!! Really enjoy this, interesting and informative. Thanks for sharing ATB

[@MrBen527]

Nice work there! Give it all the fuel you can also, pulse jets love it!

[@jeffflanagan2814]

Bring it back with the spring steel reeds!

[@Josefppaz]

Love the jig idea going to use that on my next one I build

[@djevo3441]

Amazing idea..... awesome job congratulations my friend

[@RC.3RD864]

You are a true Master!

[@kexx99]

Игоря Негоды на вас не хватает))

[@BonesFPV]

Best bong ever dude.

[@nalissolus9213]

impressive, as always!

[@gregstubel8463]

Vous etes des fous furieux 🤘🏻 vos réalisations son génial 🤪

[@garagem100criatividade5]

Parabéns pelo seu projeto 👏.

[@HP_rep_mek]

Impressive piece of kit👍

[@gettosurfer]

I want to see the rematch. Nice work on the reed assembly.

[@CIS101]

Great technique, and skill

[@communismsuperhot9611]

Great idea to spray that fuel mist so close to those exposed wire powering the pump. No worries of spark or anything. Think more next time, I enjoy your channel to much to see it go over a simple thing.

[@malcolmcarter1726]

Wow! Good to see a master metalworker at work. So thats how pulse jets work, reed valves. Now put it on a home build aircraft and call it an Me 328 !

[@fordnut4914]

Guy has crazy skills.

[@EleanorPeterson]

Excellent! Although the ones Herr von Braun sent to us in London made a LOT more noise... 💥😁

[@chriscorum2527]

It's to short. increase the length and add a short cone to the end. If a pulse jet is to short it won't fire at all. if it is to long it will run but not very well. Also you are correct in that your reed valves need to be spring steel.

[@charleymendesdesousa567]

congratulation to the germany engineer

[@thelamb288]

Fantastic....as always. Hope you get to change out the reed valve shims for spring steel. Cheers.

[@davidelliott5843]

I’m surprised stainless steel shims were not suitable.

[@thelamb288]

@@davidelliott5843 Stainless might not have the rigidity of spring steel to resonate at the frequencies in that application!

[@istvanpetocz4850]

A németek mérnökök micsoda zsenik voltak hogy ugyan azt a rezgőszelep megoldást használják még ma is és nem tudtak jobbat kitalálni.👍👍

[@user-em8wl3nk8y]

Шайтан труба 👍

[@horstszibulski19]

Frightening thing! 😱👍👍👍

[@sddiymakeitworthit7512]

Μπράβο παιδιά ειστε απίστευτοι 👍 😊 🙏

[@billymonday8388]

ellines einai?

[@lonniedomnitz1720]

Would be cool to mount a load cell to measure thrust

[@user-gi5on5ey4m]

Ооо, TIG сварка, моя мечта! Отличная работа!

[@thepvporg]

You could have just used the body of the rocket to gassify the fuel and then combust it so that its a continual process, feed in the gas via a venturi intake to get around the issue of the reed valve. Look up Primus stoves and Tilley Lamps, they gassify kerosene that is then burnt to cook or lighting.

[@mbidesign4185]

Hello, that's a good idea, but the problem is that when the machine stops, the petrol continues to evaporate and can simply ignite itself on the glowing parts. Look at my jet engine, it works without any problems. Greetings from Germany.

[@harrysheppard3745]

@ 11:56 if that was gasoline you were lucky it didn't ignite from the spark caused from the battery terminals!

[@erroneous6947]

Thank you.

[@vinceianni4026]

Good job mister well done

[@papakrakazyabrika]

Отличная работа .👍👍👍🔥🔥🔥

[@shegerketema6622]

MARVELOUS - RESPECT

[@garyweaver317]

Your valve stack is missing spacer plate between each reed valve. The German V1 has spacer plates. My engines run for several hours with no valve damage, I thought maybe the spacer plate prevent valves from bumping each other when engine are running but high speed video show valves flap in the wind like a flag. Maybe space plates create smoother air flow through the reed valves. Space plate .030 metal thickness works good.

[@glambaro]

Extrem X ,gone to the Mars.Обажаю твои ролики.

[@TonmoyDekaMUNU]

After a long time bro Really like ur videos 😍

[@edwardroke3949]

I LOVE THIS

[@degreeless_engineering]

Were you able to get it to run without additional compressed/feed air? That's the only issue I was having with mine except mine maxed the propane flow capabilities of a normal 20lb tank (internal flow limiter). I was thinking about linking several camping style tanks together as they don't have these limiters (far as I know). I don't think I want to go the gasoline route quite yet. If you don't mind me asking, what unit did you go with for ignition?

[@behrouzmovahed7525]

Good job, amazing 👌👌👌👌

[@jens-eriklangstrand1689]

Outstanding! Will you not test it with forced air into the reed walves (inlet) - or make new ones in spring steel .. The mail work is though already done excellently!

[@nathancole1802]

I feel like I need to strap it to a bike or car😅 this thing is amazing hands down

[@mtnbound2764]

go cart!

[@nikhilakapatsy]

the real integza

[@cleberpedra]

Genial.. ficou perfeito

[@haydenc2742]

Neat on how you built an enclosure for a submersible automotive fuel pump! You sure you ain't part German? Keep em coming!!!!

[@constantinexi6893]

Nice video! As somebody just getting into pulse jets, I was surprised to see a modern example of the Argus reed valves. Thanks! Edit: BTW, are you planning on revisiting this project with tool steel valves?

[@davidelliott5843]

Three reed valves from big two stroke bike engines could be fitted to a pyramid shape inlet cone. One facing forward and one each side on the slopes.

[@Teresa_Almeida]

Hello! I am working on a gasoline pulse jet for my thesis! Can you tell me which nozzle you used for atomization? Thank you.

[@Jagdtyger2A]

Nice. How much thrust does it make?

[@ebenwaterman5858]

Nice furnace

[@miketee2444]

As a machinist I appreciate your skills and sweet shop. Probably should've just robbed you Reed valves from a couple old dirt bikes though. Gas sounds sketchy but shouldn't be any worthan propane. You've got me thinking diesel is the next progression now.

[@user-bw5vs6zp6x]

Реклама конечно эпичная, но не понятно реклама чего это была))

[@systemsrenegade9888]

People from London who lived through the 2nd world war would be shaking at the sound of that engine and waiting for the big boom at the end of it.

[@z31drifterlf]

Did you do any CFD for the baffle design or can you point me in the correct direction on that?

[@brandenhoolehan7149]

Spring steel would have been a bit better like you noted at the end. Though I imagine you’d run into a few issues with that insomuch as you’d have to calculate the optimal air flow rate which I imagine could be resolved by using the 2q^2+q equals your max practical discharge rate which you’d then be able to use the optimal AFR to determine how much gas to inject and also therefore the optimal air flow rate given that pressure which would give you how much surface area the spring steel needs to open up to let air in.

[@johnsherborne3245]

Immediately after ww2 my father worked at the national gas turbine establishment at Farnborough. One of his colleagues had been part of the team interrogating the German V1 team. When asked as to what the vanes were made of, expecting some exotic alloy, the Answer was , Mild steel. Don’t be ridiculous says the English man. That wouldn’t last five minutes ! Ah, says the German gent, the journey only takes three minutes. Not quite true but point made.

[@davidelliott5843]

Walter Kaaden an engineer with Argus worked after the war for MZ (the original DKW factory). He was the first to achieve > 200bhp per litre from a piston engine. His knowledge of gas shock waves and harmonics at different gas pressures allowed him to invent the two stroke expansion chamber exhaust. That’s a static device that uses harmonic shock waves to supercharge the engine. His secrets were stolen by Suzuki when his race rider defected during a race.

[@zainslamdien8138]

very impressive

[@miguelcosta3155]

muito bom o vídeo !!!

[@donle5530]

Hello from Vietnam

[@user-kt2hb8xr3p]

Great job, thank you brother. You are so talented

[@Vtwin60]

Waiting for Gerhard Feiseler worke to show up with an airframe

[@AlbertoPirrotta]

Weel done !!!

[@Catrik]

Very cool build 👍Will you be making a new video with spring steel shims?

[@yodu45]

A V2??

[@Catrik]

@@yodu45 What? The engine is not running properly in the video, which is explained in the video captions. The used stainless steel instead of spring steels so the valves dont work properly.

[@yodu45]

@@Catrik I know, a V2 like a V2 rocket.....

[@nhocdorebita145]

Let's build turbojet engine !!!

[@marcelofarinhacarbono]

Showwwwww muito toppppp e fácil de fazer 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@exmodeus]

I can't see the front part. Did you use an air bleed or can it self sustain?

[@leechowning2712]

From the shape before he zoomed in, what he built is actually a ramjet, so would need an airflow to work. So I am pretty sure would have a fan off camera.

[@juhajuntunen2557]

Faster, Bigger, Louder!

[@TheLastSock]

holy shmoly. 8:25 that sounded exactly like a dentist drill, sent my teeth to the moon. 🤣

[@megane23m]

this is something for integza😉

[@officecrazy7]

It's why I subscribe to your channel Gents. Top notch!

[@hendrickmoroke6463]

you are really extrme bro

[@BigBlueDog810]

What happens if you give it a bigger combustion chamber and larger air intake ? Do you get more thrust?

[@Sp00kq]

The key for pulse jets is too actually have only a trickle of air going into the intake. It's very likely that the larger intake will cause issues

[@haweleve221]

SUPER!

[@davidrush4908]

That will wake the neighbors up!

[@shaunybonny688]

Would like to see it run with the suction end in the frame.

[@moosehead4497]

Dude wrre you spraying gasoline with the fuel pump test in your workshop without ventilation?

[@elberttanner6189]

That advertisement was much better than Chuckles the clown, but let me know when we are talking about 300 hectares or more.

[@maltadevnull]

Rough seams man :/ Jk this is some nice welding and super cool project, god job m8!

[@cranegantry868]

Wasn't enough air flow or maybe starved of fuel, it was running at reduced power. Nice build.