Project_ 4L60E Part 1 lesson 7

[@tykhuu2935]

I've been a mechanic for over 26 years and I'm really scared to rebuild automatic transmission and I've never done it before. I've been watching you and I have learned a lot of things and I rebuilt 4L60E completely rebuilt and i watched your videos and I feel very nervous. After i rebuilt everything and test drives, it worked perfectly. I'm so happy and thank you very much. You're the best teacher I ever had. Thank you, and have a good day.

[@transmissionbench7842]

+Ty Khuu Thank you. I really appreciate that Ty. Jimmy

[@billmcveigh5875]

Jimmy is a professional teacher & Transmission Specialist

[@rivenmotors7981]

I just rebuilt my 2007 Chevrolet 4L60E following Jimmy's tutorials and it works again! Fantastic video series and presentation. Never thought I'd attempt this procedure but he made it easy as well as ordering the parts I needed. Highly recommended, thanks Jimmy!

[@everett6733]

VIDEOS ARE EXTREMELY EDUCATING. I am a college student rebuilding two 4L60E's, one at school and one at home. Thumbs up and 5 stars. I like that these videos teach you step by step how to properly and safely take this transmission apart. Not only that, but he also shows you how to neatly organize your parts and tools. Thank you for the videos and please keep these online for many years!

[@LordPufficuss]

I am going to school to be a mechanic and have been in a automatics class for a week now. My teacher is terrible and I have no idea what anything I was removing was or how it ran the transmission. After watching the 7 videos I know more than the teacher was supposed to teach us. Thank you.

[@philmatoph]

one of the best videos on youtube for rebuilding the 4L60E transmission way better than a book thanks to this guy.

[@anthonyheak3479]

You are a great teacher. Slow and clear explanation. Appreciate the videos. Many thanks

[@EastCoast_SGS]

I will say this series is a super helpful tool if you are tackling this job for the first time.... I was a helicopter mechanic before and have disassembled many transmission and reinstalled, but nothing close to this. Very helpful tool and I would recommend to any one!!!

[@ne2i]

The Bob Ross of transmission repair.

[@billmcveigh5875]

He is a REALLY GOOD teacher, REALLY GOOD.

[@pamhaley7823]

Great videos! Very thorough on directions. My transmission hasn't given any problems until now 18 years later! Thank you so much!

[@nythanorayvri]

Definitely I Learn a lot with this tutorial great teach & got my full attention high definition video. Plus back ground is nice set up it make u stay on whole video & focus on learning. I definitely ordering the rebuild kit from here.

[@250PICKLE]

WOW! I don't normally subscribe to channels..but I just subscribed to this one! thanks for being thorough and to the point. please keep the vids coming!

[@JuanAriasArias]

Sr. I dont know English, but I know you are very good teacher. I will repar 2006 sierra transmition next week. I think your tutorial is perfect. GM should be proud becouse you work with love the GM transmition. Thank you so much any way I dont know all your word, but your tutorial will help me. I repet that in all project, becouse all people can see that. Thank again.

[@kevin21bauer]

I'm getting ready to rebuild one my self kinda really nervous about it but I'm going to give it a try it think your videos will help out a lot

[@billmcveigh5875]

No nerves, after watching Jimmy ,you will have no problems, he has 2 very good talents that I know of. Teacher & Transmission specialist.

[@FilterYT]

This series was extremely clear, well done! Thank you.

[@dnegel9546]

If you have the cheap ebay or Amazon spring compressor tool. It will not work for this even tho it says it does. You have to modify it. This is what I did. I removed the 3in U shape piece from the rod. Then take the longer metal piece (5in) and put $4 in quarters. $2 on each side and tape it to the (5in piece) so that it's the width of the spring cage. Then insert the T-handle side from the bottom of trans case and the longer part(5in w/coins taped.) And start compressing it. (Turning the 5in piece.) I would recommend putting tape on the T-handle to keep from scratching the bottom of case. I just did this and it worked.

[@haroldgoodyear484]

This guy's awesome thank you man help me out a lot I've never done one but make it look easy and it is thank you

[@michaelharris1616]

Thank you I learned so much very good teacher.

[@michaelfreeman8917]

Good job

[@boogerhead0]

9:05 - 9:13, removing the Low Reverse Piston Return Spring snap ring... I am finding my snap ring pliers are slightly too wide to fit into the space to fit the pliers tips to snag the snap ring pointed ends. I desire to not grind on these pliers tips, as to do so will likely weaken them. What brand/model of snap ring pliers are you using at this particular remove (and later, install) operation? Thanks in advance.

[@jammiedevaney]

I'm wondering the same thing. I've tried 2 different kinds of pliers and can't figure it out

[@ScrewHeadJuNgle]

"We have a empty case on this bitch" LMAO! @ 10:59

[@darwinsaradat5265]

Very nice demo...

[@GotchaplumberGotchahvac]

Great video!

[@Buckeye5316]

Also, my output ring gear does not want to let go of my output shaft. I knocked it all forward and took it all out but the ring gear is still on the shaft.

[@alexgreen121]

Hi Jimmy, I need your advise, or if anyone has any advise I would like to hear it. I just took apart my 4L60E. I have 1999 Suburban 4x4, I used your great videos of course, but now I can't decide if I should rebuild it or not. there were broken pieces of metal everywhere. The Outer Ring gear cracked, a big piece of the rear planetary gear set broke off. The broken pieces even got between the low reverse piston and the case and caused deep scratches on both of them. the big question is should I rebuild this Transmission or just get a used one and rebuild that one? I would appreciate any feedback, I don’t want to waste all my work and order a master kit, plus parts for a case that might be a total loss. Thank you.

[@hddm3]

great series

[@mikef-gi2dg]

These videos are EXCELLENT, STEP BY STEP, don't seem so bad now, I cant wait to try it. The only thing that freaks me out is putting so many parts in the same box, how to remember what went where? I can do it for engine ect, because I have seen them so may times but not trans yet. I would have to separate parts by sections at the start. Do you do older trans like thm350, 400 and powerglide?

[@xpaperroses]

Today we are going to rebuild happy little transmissions.

[@LonniesGarage]

where can i get a new spring cage that holes the low revers piston in

[@kimotango]

What causes the lower vr roller clutch housing to break/snap on the 4L60E? If anyone knows please comment or any suggestions.

[@GotchaplumberGotchahvac]

Qustion: what is the purpose of servo motor on side & the band on inside?

[@miroaffonso6493]

muito bom com isso melhorei melhores infomação com esse video

[@vernonanderson2881]

I have followed these lessons in dis assembling my 1999 4l60e and everything has went smoothly until I got to trying to remove the Output Shaft snap ring. The snap ring in my transmission does not appear to look like the snap ring Mr Williams removed in the Part one Lesson 7. Mine looks to be a small yellow colored snap ring with no eye holes to receive prongs of snap ring pliers. Can you help me??

[@miltoncherry9004]

vernon anderson I just pulled my own 2008 4l60e down and was to same as yours. No holes for ring pliers. Tough to get out but possible. I wound up modifying a pair of hemostats to do it with. Don’t laugh it worked. Lol

[@zx14rpilot]

a standard pair for use in the hole type rings that has a 45deg or 90deg tip, i used a set with the 45 tip and worked well, just required a steady hand to remove once spread the 90deg tip would work better if tips are short. did not wish to grind my flat tip set either but will pick up a cheap set in the future with the narrow flat tip, since your post was 4yrs ago, I understand this is no help to you now but hopefully this reply may help others

[@JK-hd3kw]

@@zx14rpilot 2 years later and it just helped me lol, thank you!!

[@Jesusfreak39]

Hello do I need to remove the low reverse spring to blow it out of case so I can put new seals on back.

[@jerometolledo3817]

Good day sir 👍👍👍👍💖

[@G2theE88]

Hi, followed all your directions but the low reverse roller clutch housing won't line up with the splines in the case. I've hit the output shaft with the wood but it's hitting the splines. Any suggestions? Thank you.

[@bobrusso1814]

Thank You

[@cliffhubbard7559]

I have completed tasks up to 1-7. However I cannot remove the front shaft from the planetary gear, it seems to be stuck. Any advice on how to go from here?

[@Buckeye5316]

I removed my drive shell and the sun gear was where it was supposed to be but doesn't seem like it wants to come out of the drive shell. Is that normal?

[@michaelperry8275]

When removing the low reverse piston with air pressure I saw a check ball. I thought all the check balls had already been removed?

[@michaelperry8275]

Never mind. Part 2 lesson 2 has answered my question.

[@homeroramos3757]

i have found your videos very helpful, and i thank you for making them but i have come across a problem, i can't locate the snap ring. any suggestions would be appreciated

[@billmcveigh5875]

Which ring?

[@miltoncherry9004]

The last snap ring is hard to see as its in a groove cut in the splines. Hard to get to also. You will need some longer snap ring pliers. I’ve just pulled my first one apart. Not too hard just nervous. Lol

[@alexbulalatumampos3209]

How to assemble montero sport automatic transmission 2010 model gls

[@holyman7820]

the plkanetary is stock whatcan i do please respond

[@carsandcampers9303]

Im having the a problem getting the last snap ring out