@@StaplesandVine That`s what Ii would be building in a Zombie apocalypse but with slight modifications to suit the environment oh and have a rear section with a ruggedized(1/4 in plate steel body) version of Mad Max`s V8 interceptor with a 1000bhp diesel engine running on a mix of Moon Shine & Browns Gas(Hydrogen)...... :):)
@StaplesandVineАй бұрын
That sounds like a great plan... 😎
@ray24051Ай бұрын
I'm surprised after all these years no manufacturer has ever released a remote control APC vehicle which is something I think that would sell really well. I must add that this was a super impressive build especially that modifying of the chassis.
@StaplesandVineАй бұрын
It is a bit of a mystery. it could be that those who can just aren't interested. It took a bit of working out how to do the conversion and sourcing an appropriate vehicle but the TT-02 is perfect. 🙂
@REB444416 күн бұрын
If the non-rc models go for $300-$400, then an RC model of one would probably more than double that and very few people would be able to buy it.
@Holztransistor8 күн бұрын
@@StaplesandVine Not that much of a mystery when you consider that an official license does cost money. Especially for a successful franchise. Profit margin would be small. In regard to this tank, it would need to be bigger scale and would have to weigh a bit more to really give it the feeling of a heavy vehicle (realistic movent of suspension etc.). I would be thinking of something like the Armortek 1/6 scale "models".
@scotttait21973 сағат бұрын
As someone in his 50s who started building models at about 4 years old and seeing aliens in my early teens this is simply outstanfong , for doing this and proving it could be done thank you
@olivergarcia23045 күн бұрын
"Building better APCs" Wow, incredible creativeness and ingenuity!
@StaplesandVine5 күн бұрын
Thank you, it had its moments but I solved most of the problems. 🙂
@MrButtonpresser6 күн бұрын
10/10. Outstanding craftsmanship. Just be careful. “Ripley, you've blown the transaxle!”
@StaplesandVine5 күн бұрын
Thank you. Yes the famous Achilles heel of the APC .... Ripley. 😁
@andrewreilly8791Ай бұрын
Absolutely superb. Would love to see it in an urban environment in low light with the lights on. Think you'd be hard pressed not to think it was the real thing.
@StaplesandVineАй бұрын
Thank you, yes I would love to shoot some footage in an industrial / urban environment. Sadly not much of that where I live. 🤔
@thunder2434Ай бұрын
@@StaplesandVine If it can withstand water put it in the shower and use a flower spray set to misty to simulate rain, turn off the lights and add some thunder flashes with a cell phone set on automatic. Do a closeup of it moving with a cardboard piece on the floor to get a rough surface and another (black) as backdrop. It would look amazing just like the outdoors scene in the movie. Don't damage the precious model if it can't do this of course. Another way to get a nice looking backdrop for still photos is using a PC screen with a photo from the movie or off a construction site or plant that looks the part on it. Just place an elevated surface for it to stand on in front of the screen, turn off the room lights and take a photo at a slight angle to avoid direct reflection in the screen. The vehicle lights will make it look great. Add a little ambient light if needed. If you add some smoke to it even better. Dry ice in a cup woud do it.
@Fury9erАй бұрын
Now you just need a 1:16 RC drop ship to deploy it from :D
@StaplesandVineАй бұрын
Not helpful... 🤣🤣🤣
@luigivincenz38435 күн бұрын
Then make the USS Sulaco too haha
@StaplesandVine5 күн бұрын
@@luigivincenz3843 I supose you want that in 1/16 as well. 😁
@luigivincenz38435 күн бұрын
@@StaplesandVine Well, when you start something, one must go all the way XD
@new.handleАй бұрын
Wayland Yutani would be proud of you ❤
@StaplesandVineАй бұрын
'Building Better Worlds', through superior firepower... 😁
@new.handleАй бұрын
@StaplesandVine But you build The express elevator to Hell... :D
@midnite227674 күн бұрын
Huge fan of the movie and this vehicle! Bravo!
@StaplesandVine3 күн бұрын
Sadly they don't make them like that anymore.... 😔
@PearlJam2k6Ай бұрын
The beach shots makes it basically look like the real thing since there's nothing to break the illusion of scale in the shot. Whats great is that you have left a lot of space on the inside as well that can easily support some extra things like LED controls, speakers and motors fort the turrets as well.
@StaplesandVineАй бұрын
Glad you like my APC there is certainly a lot of scope for others to take it on to another level. That I would love to see. 😎
@CheapCheerfulАй бұрын
YES! And those tires!!! Oh man this is too epic!
@StaplesandVineАй бұрын
You appear to have enjoyed the build.... 😎😎😎
@verbosedy994718 күн бұрын
I do a lot of 3D printing and make my own stuff. You make it look way easier than what it is. The fine details sell this thing perfectly. Well done!
@StaplesandVine17 күн бұрын
Thank you, people that don't have a 3D printer think it's all plug and play but as you know that's just the start. You have to be prepared for a lot of hand finishing. Large geometric parts are especially problematic. 🙂
@verbosedy994717 күн бұрын
@@StaplesandVine 100%. I made a custom 3D printed spaceship, search for "MIRAN Lancer Class 3D Printed Warship". (shameless plug I guess but I'm not trying to build a channel) It's a nightmare figuring out how to print/orient/finish/etc it. Mine required very little hand finishing and no painting; so in comparison my design took forever but printing was easy. Oh...and you did electronics, which makes it all the more harder too.
@johntreloar8203Ай бұрын
That looks so cool, I think anyone who has seen the movie would love to own either scale of this APC.
@StaplesandVineАй бұрын
Thank you very much, glad you like it. It was a brilliant design for a movie vehicle. Not a good real world APC though. 🙂
@davecofilmsАй бұрын
I hope James Cameron see this video! EPIC!
@StaplesandVineАй бұрын
So do I, just hope he doesn't want royalties.... 😮
@davecofilmsАй бұрын
@@StaplesandVine I reckon he would be mightily impressed! The miniature makes on Aliens had to some tremendous work with very basic stuff. He would love you APC.
@StaplesandVineАй бұрын
They were certainly pretty resourceful back in the day that's for sure. He is a great designer and nailed it with the APC. 😎
@ph0n1kАй бұрын
Incredible. Simply incredible.
@StaplesandVineАй бұрын
Thank you, glad you like it. Check out my Slave 1 build also on my channel. 🙂
@andrewscott7485Ай бұрын
Such an accurate build and a great paint scheme. I've shared to my 1/16 scale rc tank group on Facebook. And I've always said if I win big on the lottery this is the first thing getting built 👍
@StaplesandVineАй бұрын
Thanks Andrew for sharing my video it's much appreciated. Good luck with the lottery. 🙂
@Rex-pc8em21 күн бұрын
Amazing work. It looks super beautiful👍
@StaplesandVine21 күн бұрын
Thank you, I'm delighted with it. Roll on the Dropship... 🙂
@calvinjacobs7908Ай бұрын
I can't believe what I have just watched!!!!!
@StaplesandVineАй бұрын
Hopefully in a good way... 🙂
@karlranseier6885Ай бұрын
Amazing work. The shots on the beach break the illusion only when it is in motion.
@peterappleton6145Ай бұрын
Exellent mate could be used as a aliens movie prop keep up the good work
@StaplesandVineАй бұрын
Thank you, I would like to try some proper filming with it to see how realistic we can go. 🙂
@lascherno-go951Ай бұрын
you should make a cover like this for a robotic lawnmower 😂 I would buy one !
@StaplesandVineАй бұрын
With firing turrets.... obviously. 😁
@UAVfuturesАй бұрын
I WANT THIS SOOOOOOOOOOOOOOOOOO BAD
@StaplesandVineАй бұрын
It's coming. The files will be available late next week. 🙂
@dzzywibble73183 күн бұрын
Just stumbled here.. Amazing! Thank you for this video and all your ingenious work.
@StaplesandVine3 күн бұрын
Glad you like my channel. Great to have you on board, please enjoy. 🙂
@FortyGumble20 күн бұрын
Absolutely incredible work. Combining one of my favorite movies with my favorite hobby into perfection.
@StaplesandVine19 күн бұрын
Thank you, that's very kind. Hopefully this is now your favourite channel.... 🙂
@user-yr5zx7wp2lАй бұрын
Absolutely amazing build. The shots at the end we're truly amazing and belonged in a film set, now you gotta build the Jordens tractor from Hadleys Hope 😁
@StaplesandVineАй бұрын
Thank you, that's very kind. I would love to film a more atmospheric sequence. Maybe with the Dropship... 🤔
@RichardSanchez13725 күн бұрын
Project completed aka Game over, Man!
@StaplesandVine24 күн бұрын
The perfect quote, excellent. 😎😎😎
@aaronm185512 күн бұрын
You are a true master of this craft! Amazing work!
@StaplesandVine11 күн бұрын
Thank you, it is a lot of work but well worth the effort. 🙂
@axelusulАй бұрын
An amazing job with both the 1/24 detail and RC 1/16. Never understood why they never mechandised a 1/16 or 1/18 if figures were made. Well done.
@StaplesandVineАй бұрын
Thank you, glad you like my APC. I guess they didn't think it was commercially viable - fools... 🤔
@zorand89048 күн бұрын
Super beautiful, functional and simply executed! Congratulations!👍🍀Good luck!🍀
@StaplesandVine8 күн бұрын
Thank you, glad you enjoyed my build. 🙂
@tauruslove86Ай бұрын
What an AMAZING video!! Very well done. You knocked this one out of the park.
@StaplesandVineАй бұрын
Thank you, I am delighted with the result and lots of others seem to like it too. 🙂
@DaveyplooАй бұрын
Amazing work! Making one digitally in 3d is one thing, but I'm very envious of having a 'real' version. Great job sir!
@StaplesandVineАй бұрын
Thank you, yes it is a big step from digital to real world. There is a lot to consider in making a functioning model. 🙂
@3Y3ECEАй бұрын
Amazing work! As an rc tank/truck/scale nerd, I'd love to articulate the turret, and machine gun flashes/sound for the guns! Very well done!!
@StaplesandVineАй бұрын
Thank you, great comment. Maybe those features will come in the future. I am also looking at 4WS.... 🙂
@nvmskullworks4794Ай бұрын
A work of art really
@StaplesandVineАй бұрын
Thank you, that's very kind. 🙂
@janxspirit6707Ай бұрын
Utterly superb!
@StaplesandVineАй бұрын
Thank you, you have a 'Heart of Gold'. 🙂
@stevemuzak8526Ай бұрын
This is one of the best models I ever seen. Damn amazing work
@StaplesandVineАй бұрын
Thank you that is so kind of you to say. 😁
@john-ec446021 күн бұрын
It would be awesome to have the drop ship and the APC both radio-controlled! Drop ship touches down and the APC rolls out of its belly just like the movie! And whenever whoever does it, remember that I want this thing "to go smooth and by the numbers."😁
@StaplesandVine20 күн бұрын
'Affirmative...' Totally agree. Sadly tech isn't there yet for a Dropship that will do it all. There is a superlight RC dropship on KZbin that looks great though. 😎
@TTony050324 күн бұрын
It looks amazing you did an exceptional job
@StaplesandVine23 күн бұрын
Thanks, that's very kind of you. 🙂
@gieselatsАй бұрын
Awesome project. It runs so smoothly. Perfect done. I adore your work. Keep up the good work. Thank you for sharing.
@StaplesandVineАй бұрын
Thank you, plenty more builds to come. 🙂
@autowaaaghАй бұрын
This is really awesome. For v2.0 you should add the turret controls via RC as well. It would be great to be able to move and stow the top turret mechanically!
@StaplesandVineАй бұрын
Thanks, yes, having the turrets move as well would be very 😎
@IanLawler-u9tАй бұрын
Just awesome in both scales, once the files are released a 1/24 scale build in both the original colour and perhaps digital camo could be on my build list
@StaplesandVineАй бұрын
Thank you, glad you like my APC. Digital camo would look amazing on the APC 😎😎😎
@JohnGunter_JohnprimeАй бұрын
Fantastic looking RC version of your APC build.
@StaplesandVineАй бұрын
Thank you, it looks so much better bigger. 🙂
@irishlightandmagicАй бұрын
That turned out well lad well done.
@StaplesandVineАй бұрын
Thank you, very kind. 🙂
@toddtangen6750Ай бұрын
Really fantastic! Great work!
@StaplesandVineАй бұрын
Thank you, plenty more to come on the channel. 🙂
@CosticaKristianDiVogli17 күн бұрын
Masterpiece, looks real; amazing work sir.
@StaplesandVine16 күн бұрын
Thank you, that's much appreciated. 🙂
@MrPhoenix1905Ай бұрын
Hi, really perfect work! Huge respect!!! Hope the stls will be available soon...
@StaplesandVineАй бұрын
Thank you, yes I'm sorting out the stls next week. Got to write the instructions as well. Not long now. 🙂
@dib811815 күн бұрын
Fantastic work!
@StaplesandVine15 күн бұрын
Thank you, that's very kind. 🙂
@TheGunnarRoxenАй бұрын
That was awesome! I've always loved the APC design and your build is beautiful. Excellent job!
@StaplesandVineАй бұрын
Thank you, if you liked the APC check out my Slave 1 build. 🙂
@nzavonАй бұрын
Fantastic, good to see you didn't mind it getting dirty at the beach 😀 The turning circle seemed better than I would have thought.
@StaplesandVineАй бұрын
The beach had to be done. Once dry the sand was blasted with an airline - all good. Turning circle isn't terrible but could be improved if the front wheel walls were cut out more. 🙂
@jack1d1XB20 күн бұрын
You could use a lateral wood clamp to press either end for block parts to have greater adhesion.
@StaplesandVine20 күн бұрын
Yes that would work very well, but I don't have any. 😟
@jack1d1XB20 күн бұрын
@@StaplesandVine As you're already creative, make one, 😁
@StaplesandVine20 күн бұрын
🤣🤣🤣 how hard can it be...? 🤔
@steelrad6363Ай бұрын
A superb piece of work. Thank you for your video.
@StaplesandVineАй бұрын
Glad you enjoyed my build. I hope you like some of the others on my channel. 🙂
@eriklee1604Ай бұрын
Beautiful !
@StaplesandVineАй бұрын
Thank you... 🙂
@WeasleFireableАй бұрын
A very comprehensive and well put together video, usually I skim through such diy videos but this one kept my attention with the narration, definitely inspired me to work more on my 1/16 rc Panther G.
@StaplesandVineАй бұрын
Thank you, I really appreciate your feedback it helps steer me in the right direction to grow the channel. 🙂
@omegaclark52487 күн бұрын
cant belive how good this is... great job
@StaplesandVine7 күн бұрын
Thank you. If you like this check out my Slave 1 build. 😎
@matthayward7889Ай бұрын
Everything about this is just amazing!
@StaplesandVineАй бұрын
Thank you, glad you liked the build. 🙂
@ZombearАй бұрын
Just watched this after you shared the link in the Facebook group. Love your work, such an amazing replication.
@StaplesandVineАй бұрын
Thank you, glad you like my APC. If you like that, check out my Slave 1. MILANLO restarts soo then it's onto the Dropship. 😁
@davidgillard4995Ай бұрын
Bloody brilliant mate!
@StaplesandVineАй бұрын
Thanks again...😁
@PitstainHobbiesАй бұрын
As a long time builder of 1/16 Tamiya full option tanks I am just blown away by this epic build, The M577 is my favorite armored movie vehicle of all time. I am now convinced I will need to get better FDM and resin printers so I can hopefully make one of these myself. I hope you might also consider selling the cast parts as well with the photo etch and paint stencils as a set.
@StaplesandVineАй бұрын
Thanks for the great comment. I am looking at adding the metal parts as well for both scales to the accessory set. 🙂
@Razalonjrt1Ай бұрын
Wow very good work and yes now that it moves it looks more like the movie one all you need is the planets background LOL Congrats on a fine build. 👍👍
@StaplesandVineАй бұрын
Thank you I would love to shoot a proper movie sequence with it. That would be so cool. 😎
@trennefeltАй бұрын
This is just so amazing. You are incredibly talented. I love the design of this ande the dropship from aliens. You really nailed this one
@StaplesandVineАй бұрын
Thank you, that is very kind. I'm really looking forward to tackling the Dropship. 🙂
@stormmartin57Ай бұрын
love watching a master at work..... great job looking forward to next build
@StaplesandVineАй бұрын
Thank you, that's very kind. I still have the MILANO to finish then it's on to the Dropship. 🙂
@donniecatalano7 күн бұрын
What a beauty
@StaplesandVine6 күн бұрын
Thank you, she came out well in the end. 🙂
@gabiballetjeАй бұрын
Moveable turret, i see options for the remote control of that XD Also, this thing got bigger than i expected. Another job nicely done ! Honestly though, if you were to spend more time on moveable turret, some more decals en detail and a bit more of a damaged paintjob, a window, perhaps make it a bit heavier, you could use this as a prop in a movie already. I mean, aside from the bouncing, this already looks like a very zoomed out shot over huge terrain.
@StaplesandVineАй бұрын
Great comment. Certainly servos could easily be fitted to rotate the turrets. Making the upper turret stowable is more difficult. There is certainly plenty of room in there for activities. The front suspension is an issue. Maybe more weight? I am looking at 4WS which would be very 😎
@krautmaster7922Ай бұрын
Just amazing work!!!
@StaplesandVineАй бұрын
Thank you. Check out some of my other builds on my channel. 🙂
@marekparek588611 күн бұрын
ITS VERY COOL !
@StaplesandVine11 күн бұрын
Thank you, it's not perfect but it looks real enough. 🙂
@MANIANes17 күн бұрын
Another great episode. Awsome job, but... ...for a second there when I saw you cuting RC chassis in half, I was thinking that you will join two front halfs from two chassis and that way have both front and rear axles steered... (maybe a little idea for next episode?? xD) Anyway, youre work is inspiring. Best Regards .
@StaplesandVine17 күн бұрын
@@MANIANes well, actually, I am looking into all wheel steering and maybe some other features. 😁. Glad you enjoyed the build series, thanks for the great comment. 🙂
@thrrax7 күн бұрын
Tip for making clear resin prints "regain" their clarity: use varnish on them. Also works for epoxy and I think cast resin too.
@StaplesandVine7 күн бұрын
Thanks for the tip. I tried a few on other builds. Still looking for the best option... 🙂
@Wolfe35115 күн бұрын
a cheaper way of filling the gaps is cheap supa glue along the join and bicarb soda dumped over the top, then brush off the excess. It sets like concrete instantly and can be sanded and painted. We made rubber like bumpers for our tug boat models we did same a your tires but my mate who works in roofing decided to use black RTV silicon!! IT works brilliantly take longer to set (several days to a week depending on air temp)
@StaplesandVine15 күн бұрын
@@Wolfe351 yes, I tried that method. Never really got on with it.... 🥺
@GJBricksАй бұрын
Amazing! You are inspiring. I really wish I had your patience. It looks fantastic! I think you should add servos to to the turrets. And if you can add the sliding mechanism on the turret too 😊 And 4 wheel steering next? Thanks for sharing this. It looks awesome on the beach.
@StaplesandVineАй бұрын
Thanks for the great comment, it means a lot. There is certainly scope for improvement with the chassis. Maybe that's for a future video. It takes me quite a while to work out how to do stuff before I start designing but that's for another day. 🙂
@271chrissyАй бұрын
Man thats spot on ...on the beach it looked so real.
@StaplesandVineАй бұрын
Thank you, I hope to do something a bit more 'atmospheric' in the future. 🙂
@dmaynorАй бұрын
This is what I come to KZbin for!
@StaplesandVineАй бұрын
I hope you enjoy the rest of my channel as much. Check out my Slave 1 build. 🙂
@Chris.Davies23 күн бұрын
I've never seen so much superglue splashed around. I have always worked on the rule that "less is more" when using cyano-acrylate. It is a rule which has always served me well. Because "one drop holds a ton".
@StaplesandVine22 күн бұрын
Superglue is cheap and the joints need to be bullet proof for a 3D printed RC vehicle. This is not a static model, it has a lot of mass and I have to be sure the parts stay together. 3D prints always have a degree of distortion and larger parts more so. Peace of mind is well worth a few grams of glue. 'It's the only way to be sure...' 🙂
@thunder2434Ай бұрын
Superglue is fine of course but ABS can also be glued effectively with poly cement.
@StaplesandVineАй бұрын
Yes, I tried that before but when there are such large surface areas it doesn't fully set leaving the ABS soft. 🤔
@RobaFett1898Ай бұрын
Awesome as always! Very talented 👌🏻
@StaplesandVineАй бұрын
Thank you, that's much appreciated. Now just to check and prep the files. 🙂
@bonedeep1959Ай бұрын
that is so awesome!!! if you sold these, exactly like this, RC and all, I would buy it in a heart beat mate.
@StaplesandVine29 күн бұрын
Hopefully, one day, someone will... 😎
@CheckYourShedsАй бұрын
Just amazing! It looks stunning.
@StaplesandVineАй бұрын
Thank you. 🙂
@yamabushisamaАй бұрын
Wow you didt that sir yosh!!!!!
@StaplesandVineАй бұрын
Thank you, that's very kind of you. 🙂
@pacifickingslive69065 күн бұрын
Fantastic work. The film APC had additional rear steering as well. I was curious if that was noticed.
@StaplesandVine3 күн бұрын
Thank you, yes it did have all wheel steering but I wanted to keep the build as straight forward as possible so others could recreate it. I am looking at a Mk 2 with all the options.... 🙂
@ptonpcАй бұрын
That is impressive!
@StaplesandVineАй бұрын
Thank you, glad you like my APC. 🙂
@adrianfarr9927Ай бұрын
The APC looks amazing!
@StaplesandVineАй бұрын
Thank you, glad you like it. 😎
@thunder2434Ай бұрын
OMG this is so Awesome!
@StaplesandVineАй бұрын
Thank you, glad you like my build. 😎
@keithc904Ай бұрын
Amazing work!
@StaplesandVineАй бұрын
Thank you. That's kind of you. 🙂
@REB444416 күн бұрын
Honestly, in order for the interior of the Aliens APC to have the features it had as shown in the movie, it would make sense that it should be done in 1:16 scale for 1:18 figures. The same with whatever other scale figures you want to portray. Just make the APC a little bit larger scale for dioramas.
@StaplesandVine16 күн бұрын
That's the beauty of 3D printing you can scale up or down to print any size. I chose 1:24 for the interior version as that is the scale I will make the Dropship. 🙂
@REB444415 күн бұрын
@@StaplesandVine That's a good idea since that dropship will be massive. Are there any decent action figures at that scale for dioramas though?
@sjmarhamАй бұрын
That is just awesome.
@StaplesandVineАй бұрын
Thank you, glad you like it. 🙂
@stevemerkator27 күн бұрын
Wow...just wow. Amazing work.
@StaplesandVine26 күн бұрын
Thank you, that's kind of you. 😎
@The_future19916 күн бұрын
wow what an incredible car
@StaplesandVine5 күн бұрын
Thank you. 🙂
@craigtallent79Ай бұрын
Amazing work,
@StaplesandVineАй бұрын
Thank you 🙂
@chrisanthony144Ай бұрын
Great job!
@StaplesandVineАй бұрын
Thank you, glad you like the build. 🙂
@danwentz8 күн бұрын
Now that is a Cyber Truck!
@StaplesandVine8 күн бұрын
If only... The glass still breaks though. 😁
@marlostewart1107Ай бұрын
Awesome work
@StaplesandVineАй бұрын
Thank you. 🙂
@gnat6664Ай бұрын
Very cool. Great work
@StaplesandVineАй бұрын
Thank you, glad you enjoyed my build. 😎
@TheRealStructurer10 күн бұрын
Looks fantastic! Thanks for sharing 👍🏼
@StaplesandVine9 күн бұрын
Thank's, that's very kind of you. 🙂
@thespacesbetweenstudio334620 күн бұрын
incredible job!
@StaplesandVine19 күн бұрын
Thank you, glad you enjoyed the build. 🙂
@The.Steve.West.Ай бұрын
This is epic, you have inspired me megga thumbs up :)
@StaplesandVineАй бұрын
Thank you, that's great to hear. Glad you liked my build. Check out some of the others on my channel. 🙂
@AcroAirwolf8 күн бұрын
Great job! I use spray filler to make my 3D printed parts smooth on the surface.
@StaplesandVine8 күн бұрын
Thanks, Yes filler primer is a great option. 😎
@samtani27822 күн бұрын
Incredible!
@StaplesandVine21 күн бұрын
Thank you, glad you enjoyed my build. 🙂
@RCvaporАй бұрын
So cool, great build 👌
@StaplesandVineАй бұрын
Thanks, glad you like it. MILANO next then.... Dropship. 🙂
@CrimsonSurvival19 күн бұрын
Good job on that, brother.✝️👍🏻
@StaplesandVine19 күн бұрын
Thank you, much appreciated. 🙂
@deadsky8248Ай бұрын
That is awesome, well done sir, I wish I could do what you have..
@StaplesandVineАй бұрын
Thank you, I have been doing this a very long time, and I'm always learning new stuff. 🙂
@ceverett6821 күн бұрын
this is awesome. good job
@StaplesandVine20 күн бұрын
Thank you, it was a real moment seeing it running on the beach. 🙂
@marcoschlausch7176Ай бұрын
If you could now build an airworthy UD-4L where it would fit, you would be my hero 😉
@StaplesandVineАй бұрын
That's a pretty high bar.... Hold my beer.
@marcoschlausch7176Ай бұрын
@@StaplesandVine But I know if you do that, your channel will explode 😉