PROJECT EVO X EP. 5 | HEADLIGHT BLACKOUT

[@luisburgos3414]

Came here after watching the gray evo headlight blackout😂

[@madbeat5]

It's always fun to see you guys on your earlier videos! I'm also here after watching the Black out headlights on the silver Evo 10 👍😂

[@husamsalhi6071]

Who's here after the new silver Evo video?!😂

[@Dvniemela]

😂😂😂

[@judetoyota9099]

Im watching from when he started youtube.so far so good.

[@VenomWorks]

Man, what a difference between this videos and now, you're growing really fast Devin Never forget your roots.

[@B_M_F_710]

In the U.S projector/HID cars come stock with a lower light beam on the left hand side. Helps with oncoming traffic.

[@Juniorlopez-yg1bx]

I’m here after the silver evo headlights 😂

[@jonathanliu9418]

This is sooo sick... I just bought my 1st Lancer a few weeks ago.. It's also my 1st project car.. I can't wait to do this to it!!! thank you for the video!!!

[@BrettC1973]

I recently did this to my 2012 Evo X. Looks pretty aggressive, plus i love the whiteness of the projector lens against the white car.

[@Dvniemela]

Yes it looks much better!

[@siccemo1380]

man, your evo is nice. the blacked out headlights looks so much better than chrome haha. halfway tempted to try it but my luck something will fail xD i just bought my first evo 3 weeks ago :) really digging your wheels too man

[@199broughtthehorizon]

Very helpful, only issue I ran into was using acetone to remove glue from the lens ate the plastic and left a scratched cloudy look in that area, other than that it came put great!

[@AlphaStreet]

This looks clean as hell bro. Thank you for the little tutorial. Will most likely do this to my Lancer in the future.

[@jonwright72509]

You have 2 of the best looking evo and sti great video 👍🔥 keep the vids coming 👌

[@Dvniemela]

Thank you, much appreciated!

[@JackyNgo]

also damnn, you must be living the life owning both the beloved cars of import enthusiasts

[@Dvniemela]

It is quite enjoyable owning "rival" cars!

[@fig03gsxr750]

Keep up the awesome videos bro, they are very helpful. :0)

[@Dvniemela]

Figadamus will do man thank you!

[@joshuaquintana3690]

Is it ok to put the headlights in the oven with the low beam bulb inside the headlight? That’s what it looks like what you did

[@nathanhawkheroux9077]

love your vids, just subscribed!

[@cuttysti2083]

That's what's up👌🏾

[@hunterneumann9068]

Affect light performance at all?

[@jdmteggy2388]

u didnt need to add glue to reglue it ?

[@Tughill37]

great video

[@LevisLBC]

Is this the SSS package? Where's the bulb height adjustment? Also, why did you choose to not use new glue/sealant?

[@Dvniemela]

Yes it is SSS. There are two headlight adjustments on the backside of the headlight. I didn't use any new sealant because you can usually get away with reusing the factory sealant for a time or two.

[@LevisLBC]

Any way you can point to the adjustments in the video? For example, go to 8:54 and it's the... something something. Been trying to find it on my car as well

[@fig03gsxr750]

Nice headlight setup dude. Cheaper than going out and ordering a new set of blacked out lights. How do you manually adjust Headlights?

[@Dvniemela]

Figadamus definitely! Two adjuster screws on the back.

[@fig03gsxr750]

Tyvm

[@jaimeochoa5269]

Bro I wanna get those gold wheels on my evo x. They look sick! Would they look nice on a black evo?

[@dwn5hft]

It seems like you sprayed the reflector, was that the DRL? If so do they still function?

[@Dvniemela]

Yes that was for the DRL, I then removed the DRL bulb. I'm sure you could keep the bulb in and run DRL's fine.

[@elvincastro9479]

Bro keep up with the content is really awesome. Your undertray what brad is?

[@Dvniemela]

Thanks for the love man. Greatly appreciated. Under tray is an SSP.

[@jaredzak1814]

So jacked about the 350 subs. Well kinda. At least I think you’re jacked? 😂 naw jk dude, dopest channel on KZbin. Came a long way since here

[@norcalevoxx6255]

Which car did you get call out to race the most Evo or Subi?

[@Dvniemela]

Evo for sure.

[@Jess-hz6vm]

Will it work with just using a heat gun instead of a oven?

[@Dvniemela]

I've never used a heat gun before, others have with it working fine. I'd say it would work!

[@ron1-l7r]

How long did this whole process take in blacking out the headlights?

[@Dvniemela]

Rolando Rivera Usually a day project

[@ron1-l7r]

Dvniemela yeah kind of figured out. But thanks man. You have some sick rides.

[@tanizakisama]

How you adjust the lens?

[@TheSnyds]

Nice video man, have you had any leaks?

[@Dvniemela]

Thank you! No nothing leaking at all.

[@TheSnyds]

Dvniemela Just subbed, like your content man. I own a Ralliart and may be doing this soon then. Thanks for getting back to me!

[@Dvniemela]

Thanks! Not a problem!!

[@bigbosssh4732]

😍🖒🖒🖒🖒🖒

[@leonc7690]

Wheel set up at this time?

[@Dvniemela]

On the Evo? They were 18x9.5 +22 Rays Gramlight 57Xtreme in LTD Velvet Red.

[@aurisgomez8732]

Evo rims name?, keep up the videos👍🏼

[@Dvniemela]

Evo wheels are Rays Gramlights. Thanks man!

[@franklasomvp]

How do you align the beam ?

[@Dvniemela]

There are two adjuster screws on the backside of the headlight. This explains the height fairly well. If you still need help let me know and i'll make a video. www.wikihow.com/Adjust-Car-Headlights

[@MrJorgran2]

Yes plase make a video

[@Kokovideous]

Hey have you had any issues with moisture using the same sealant?

[@Dvniemela]

I have not!

[@Kokovideous]

Dvniemela Sweet! Thanks man!

[@Dvniemela]

You're welcome!

[@JackyNgo]

Song?

[@Dvniemela]

Song is called Prismo by Weakness.

[@Dvniemela]

Other way around, sorry haha. "Weakness" by Prismo.