project radient energy. Part 2. (WARNING Do not wear headphones watching this video);)

Test nr1.
And yes it was 0VDC on the cap.
www.mediafire.com/download/id6...

[@marshallwheelis]

Loving the plexi wheel!!

[@bravomark2]

Dude that is mint.

[@SilentDeath002]

really nice and clean set up there V. something to think about. those neon lights come on to protect your transistors , i would highly recommend you run that power into batterys and check your base resistance. depending on the transistors your using that has some serious output. i stopped that feed back problem by using 2 5408 diodes off the collectors and my neons did not light up any more. each handles up to 3 amps at 1000 volts. hate to see such a clean set up go up in smoke. again, congrats

[@valllhalla]

The neon's is lit because of the voltage on the cap is getting high over 100V.. so it is protecting the transistor. If i connect a battery on the out put it will not lit, it is only 12VDC. Thanks for commenting

[@jvon3885]

I'm wearing headphones.....let's see what happens...... PSA: never tell anyone not to do something because they will automatically do it. Lol. Nice project though.

[@valllhalla]

Cool project. Look at the info under this video, you will find a schematic. Hope it's understandable. And good luck to you!

[@valllhalla]

yes you are right, but the wheel is quite heavy and i have a stainless steel flywheel on it as well, that helps. Stainless steel is heavy! :)

[@thesoundsforhealing]

you have the best bedini motor ever :) good work

[@valllhalla]

Thanks pal!

[@erikmjelde4428]

thought you got your hands too close to that 200+volt cap but very nice.

[@shad0wburn3d]

Freaking awesome! Are you gonna show parts and setup for the community or will this be closed door for now :). Cheers!

[@JavierCabaSeg]

Dios que guapo¡¡¡ Gran trabajo Sneak. Una preguntilla, es recomendable usar en la bobina un hilo mas fino para usarlo de disparador y los demás mas gruesos o al revés? esto nunca me quedó claro, y hay esquemas distintos por internet. Gracias¡¡¡

[@Onelove_011]

Work of art! looks like all you need to do now is add a second battery and switching circuit for charged batteries. So not only are you creating a voltage boost like a transformer or ignition coil but you are getting some benifit of knetic energy in the process. Almost completed nice.

[@valllhalla]

Thank you! Yes i am going for a "cap pulser" to charge my secondary battery.

[@valllhalla]

Thanks for your concern. I have to find another big battery instead of capacitor :) and maybe i need bigger diodes too.

[@SilentDeath002]

hey V one other safety tip,, check out charging battery bible. shows whats called the C-20 rate. the amount your set up is putting out is fantastic, congrats again, but if you try to charge a battery at that rate it would blow up. i showed the vid to one of our administrators, i am a moterator, he said for those neons to light up, something is wrong, hope you did not blow one of those transistors, and amp draw increases but it could continue to run. hook amp meter from negative of battery to see

[@Edmorbus]

Thanks for sharing

[@valllhalla]

Thank you shad0wburn3d. No no i can make a video with close up of every inch of it.. I wanted to make a bedini tribute, and make as simple and transparent bedini energizer as possible. So there will be no question where the energy is coming from. (or do we know?;)

[@sciencedusoi-arthurmantes6315]

SO it is a bedini motor-gen, right ? Did you have overunity ? What power did you put in and have out ? I am very inyterested ! Thanks

[@JoseRochaMicroondas]

I enjoyed this video congratulations. in my work channel with solar panel

[@valllhalla]

👍

[@cesarbaratas5612]

I GOT 600V from solid state version of that ... when you discharge it ,, it has more power than the drive power but that only happen when capacitor is fully charge... after discharging you go back to tthe underunity plus the mechanical output that is really very efficient

[@propheccy]

nice setup, you should bandage it though, just for safety.

[@pedrotorres9836]

I would like to see all neon bulbs replaced by one electrical outlet. Take all 7 inputs to neon bulbs in parallel as one input to an electrical outlet and all 7 outputs to complete the circuit. Then plug in any less than 5 amp 120 appliance and see if it works and still charges a second battery while discharging the primary battery at the same rate. I would like to see if you can power some appliance instead of the 7 neon bulbs. That would be impressive

[@valllhalla]

Nothing is free in life. At least not energy.

[@pedrotorres9836]

@@valllhalla Ofcourse not. But force electricity into a path you want it to take is the price you pay. Instead of 7 neon bulbs a simple 120 volt clock radio as the dump voltage.

[@SilentDeath002]

if your using 1n4007 diodes off the collector, they are only good for 1 amp, by watching the reaction from your neons, i would not run it anymore until you get a couple of 2n5408 diodes off each collector. they protect each to 3amps 1000 volts each. thats a really clean build, what size transistors did you use by the way? if your up in the MJ series you could be at 140 volt input area, with 20 amp rating which would give you spikes to 1000 volts.

[@uldymuldy]

2n5408 is not a diode it is transistor.

[@MrPusmucans]

Perfect job. Say please what is COP for your motor? Thank

[@valllhalla]

+Inguss Pusmucans Thank you for your nice comment. First of all, i was trying to make a JB energizer as clear and transparent as possible. For all the sceptics out there... It runs! but.. it's a lot of tweaking to get it in shape( i must do more). And for the COP : Cop is in the charging battery + it output some mechanical work at the same time.

[@patelsikandar4668]

Hi Sir nice video can you tell me AWG wire size and turns

[@kgsalvage6306]

Hello , I like this setup . I have a basic wheel with a bifilar . If you are still responding . What gauge wire did you use and what was the length ? I want to do a multifilar. Thanks KG

[@valllhalla]

Hello i use 0,6mm wire ca. 60 meter.

[@sas25135567]

Nice, I have question what resistors are you using, as I’m finding it hard hunting Down 2 watt 640 ohms 5% resistor 4 colour band of blue yellow brown and gold

[@valllhalla]

That depend on the coil.. but i'am not an expert on this.

[@valllhalla]

Thanks sorry for the shaking in the video, it was my 2nd run and i was excited. :)

[@marshallwheelis]

A flywheel would help though..

[@ybaggi]

Hi, beautiful machine, how do you guys make this amazing plexiglass builds? Are the buses small copper tubing or am I not seeing that right? why are the neons lighting? can't the cap take all the energy from the machine? thanks agian

[@valllhalla]

Hi there, Thank you! I made my self a "plexiglass bender" that heats the plexiglass very specific. The buses are from regular solide core copper cable 4mm2. The neons is protecting the transistors. Neons lights up at 90 volts. Thanks for watching

[@SilentDeath002]

i am very familiar with radiant energy, and i would highly recommend you check out whats called the battery bible before you do any charging with that set up. it appears someone has given you misinformation or you did not understand fully what you have read. i would rather you be safe then sorry. to find information on the C-20 rate just do a search, "Battery Bible C-20 rate" and yes, radiant energy can blow up a battery.

[@soteriology1012]

Keep doing this.. This is a great way to destroy a capacitor.

[@valllhalla]

+Soteriology101 Thank you!

[@griffingibson4389]

what is going on here? did he just turn a wheel and make all that power??

[@valllhalla]

Yes he did from 12VDC to 229VDC

[@griffingibson4389]

+valllhalla so he took 1 battery and charged like 3? or that's the idea right?

[@cesarbaratas5612]

I'm here at 2020 whO'S there now

[@MrAnthony500]

i would like a complete diagram of the circuit simplified clear im trying to build a dual core 9 mag x 4 disk = 36 mag 36 coil 2 disk radiant energizer also along with that config im thinking doing magnets n coils n s n s n s or is n n n n n the center rotor is 9 mags both sideson side im thinking of s n s n s n s n s n s facing out then back side n number 1 facing the plate n s facing opposite coil pleae can anyone give me a knowledgeable reply with a diagram

[@patelsikandar4668]

Hi Sir how much value of register

[@glasstronic]

Go buy a disposable camera and have a look at the flash circuit. It does the same thing at a tiny fraction of the cost, MUCH more efficiently.

[@valllhalla]

:)

[@resonantenergy5238]

can anyone explain how to make coils

[@valveman12]

Why are people calling BEMF Radiant Energy?

[@griffingibson4389]

what is this?

[@arkangel8709]

This looks like a great deal of time and effort was spent building This unit.!! Every thing seems to be in order,. I said ( SEEMS ) TO BE,!!! So, that's why I am SO SAPRISED TO SEE THAT THIS Build" is ALL WRONG,!!!! First of all," your bi-filer Coil is sappossed to be 8 - to - 10 different sizes of wires, all Twisted into One,.!! Okay* you have that 1/2 Right, which means it is also 1/2 Wrong.!! By That I mean" The wire's are sappossed to be untwisted at the end's.!! And one wire should be solderd to Each Transistor.!! Therefore, Making it possible to Extract (BMF) from each Coil- On you're winding.!! In lames-Turms, Therefore* getting a charge spik from Each coil- as the tips of Each coil- wire is powered, By a "Back- Electric- Field" Each Time, the magnetic field is formed, and Callaps and dump's it's Power spikes into the Mosfets, the Mosfets then increase the power spikes by, Closing, therefore pushing the huge amount of BACK Spikes, all into the main Collection wire. What we call the positive, side .!!!! It's then run through an bridge rectifyer, and stored in the Batterys viea, an Solar Charge, Controller... So, I strongly suggest you studying what your trying to build, and rearrange some things at the end of the Coil. You will collect a whole lot more power, than your getting Now. Thank you for showing interest in Free and or Zero- point, Energy.!!!