Project Solar QCell 400w Solar Panel Overview and Install

This is the QCell 400w Solar Panel from Project Solar. Manufactured in the USA with top quality cells. This Mono Crystalline panel has a transparent back that allows for a little more power to be made. With an almost 21% efficiency the panel really puts out some power. This panel couples well with the project solar power bank 2000 power station.
Find the QCell Solar Panel here:
projectsolar.c...
projectsolar.c...
projectsolar.c...
Ram Pumps available on AMAZON
amzn.to/2EWrQHN
Also available on Land To House Website:
www.landtohous...
Help Support land To House by Paypal:
paypal.me/land...
Send Mail to Land To House:
Land To House llc
P.O. Box 323
Micaville, NC 28755
See whats coming up before it hits KZbin on my Facebook Page:
/ landtohouse
Land To House is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

[@benkanobe7500]

When connecting panels (and especially disconnecting) that are in the sun, it is good practice to cover the panel with a sheet or cardboard or something to "turn it off" before you connect/disconnect.

[@thomasjacques5286]

My solar contractor selected Q Cell 405-watt panels for our home PV system, consisting of 31 panels and 31 Enphase IQ8A Inverters making 12,550 watts DC or 15,400 kWh annually. It's about 25% more than our average annual consumption.

[@JMaxwell1000]

So to power a 5-bedroom house, you'd need to install 6 or 7 acres worth of these monstrous panels, taking up your entire property. These things are HUGE! In any case, I admire your skills.

[@ConorLennon]

No, you’d need roughly 20 of these panels, assuming the house is using 30KWh per day (which is normal for a family home).

[@IndentureTrustee]

​@ConorLennon 20 panels will produce about 8kw, you would need far more than 20 panels since each panel Is 400 watts

[@LandtoHouse]

My home runs on 6kw worth of solar. But I don't use the hvac or hat water off grid. This gives you a good example of how much power a home uses. A lot!

[@GeezerWheels]

I think some people don't known that the system produces a certain amount of Kilowatts PER HOUR. So an 8 KW system produces 48KW in six hours of good sunshine, mid-day. 20 panels of 400 watts each produces 8 KW, Per Hour. I hope that helps. @@LandtoHouse

[@angelguerrero5586]

7 acres would power an entire neighborhood 😂

[@glenntanner3]

When measuring, if it's 39in between the mounting holes then on the tracks just measure 39 from the right side to right side, or left to left. It's the same as from the center of both, but you can hook or press your tape for an accurate and easier measurement.

[@TheTundercat222]

Nice work sir tidy job....

[@JurassicJenkins]

@12:58 Use a shop vac to vacuum a pull string then connect to the wires to assist with pull. Also, might ant to leave the string for future work. Not sure how long it will last though.

[@jllaine]

Nice efficient T mounts for your panel and cool that the workshop is getting its own solar system. I'm hoping to see what you come up with for a "tiltable" mount so that you can change the angle with each season.

[@benkanobe7500]

Seth, Not "Twelve OClock Noon". Solar Noon. They can be over an hour different!

[@JimmyGunXD556]

Sweet!!!!!

[@paulkawsek8617]

How much? How many kwh? Voltage? Amps?

[@LandtoHouse]

Those are listed in the video. But you can also find that info on the project solar website. I am using this to power the lights in my shop. Ran it 3 hours last night. Doing well.

[@user-ew1gf5pj1d]

🇰🇷 응원합니다

[@gilbertmartinez6538]

I clicked this channel to learn about that massive solar panel ...you wasted too much time constructing the not so relevant solar stand ...Im outa here