In my last video I was only planning on cleaning the seats............ but it was so so wet. In this one I fix the lean and set to cleaning. The results are amazing.
Пікірлер: 52
@anonlincracing24842 ай бұрын
So far it's becoming a stunning example
@Exhausted-autos2 ай бұрын
Thanks buddy.... never finished though are they. 👍👍💲💲💲
@mariomelo65162 ай бұрын
Video TOP
@emmajacobs55756 ай бұрын
The headrests on my late F/early TF seats come out by rotating the plastic collars surrounding each post and pulling the headrest up (with your third hand 🙄) The seats are obviously different though, as mine don’t have pretensioners
@Exhausted-autos6 ай бұрын
Cool, I'll try that..... not sure they couldn't just use a push button thingy like everyone else. 🤔
@markjones88466 ай бұрын
Great video, very enjoyable. Regarding the roll hoops, get rid of them, they are likely to injure you in an accident.
@Exhausted-autos6 ай бұрын
Thanks Mark, Yep ive already decided they are going. 👍👍
@markjones88466 ай бұрын
Hi Craig, getting rid of it is a good idea. My wife's F came with a 'roll hoop' that wasn't anywhere near as sturdy as the one you have, it truly was a death trap. It went into the tip a few days after she purchased the car. Another friend has a flimsy roll hoop in his F and I can't convince him of the hazard it posses, I hope he's well insured. Keep the videos coming!
@russellmanning28116 ай бұрын
@@Exhausted-autos any tips for a puddle under the driver's seat ?
@PrincipalAudio6 ай бұрын
My advice on the speakers. If you install speakers in open air, you won't have much sound as the pressure from the front of the cone instantly transfers around to the rear of the speaker cone, massively reducing efficiency. It's why speakers are usually inside a box or have a large flat interface in the form of "open baffle". The box/baffle essentially separates the front of the speaker cone from the rear, improving efficiency, making them louder and deeper in bass. So if you want speakers, you'll likely have to remove the roll bar hoops. Either that, or you may be able to figure out a solution to keep the hoops with a bodge. I mean, they are more cosmetic than for actual rolls.
@Exhausted-autos6 ай бұрын
Thanks for the advice... I've already decided to go with the stock sound bar and change out the old speakers. That should give me what I need.
@PrincipalAudio6 ай бұрын
@@Exhausted-autos Awesome. Hope it sounds good! Might swap out the speakers on my bar as the standard ones are a bit rubbish. Really muffly sounding just like the original front ones.
@alexharris79926 ай бұрын
Great transformation there! Really enjoying these videos Craig, keep them coming!
@paulsyarduk20456 ай бұрын
Well done Craig, you're definitely not a quitter, you've solved every issue so far that this TF has put your way, brings back memories of the 4 I've owned. I know you're in the trade so to speak and some! Keep em coming 👍🇬🇧
@Exhausted-autos6 ай бұрын
Thanks Paul, I enjoy the challenge..... I'm not in the car trade but I am an engineer.
@paulsyarduk20456 ай бұрын
@@Exhausted-autos indeed 👍
@user-lu7fe1ct3o6 ай бұрын
Really enjoyed watching you do this giving me inspiration to do my tf now keep them coming
@Exhausted-autos6 ай бұрын
Thanks Steven, you'll have the nice weather for it soon aswell. Enjoy. 👍
@jameswright61804 ай бұрын
Looking great, I'm doing a clean of mine too. What are you using to clean the plastics please?
@kevanrothwell74816 ай бұрын
Hi I’ve just fitted the same roll hoops to mine and carried out exactly the water proofing that you are doing. I fitted the original speakers to some speaker brackets that came with the hoops. It took over a week to dry out my carpet. I also replaced the front and back door seals I got off eBay.
@grahamjames96106 ай бұрын
Good job well done
@stevemiller-hp4vt6 ай бұрын
Hi Craig, well done mate. So those holes that were rusty that you smashed out in the last video. What is directly underneath them? I I would have thought they would require something welded in to keep out the wet. Do they not go straight to the road? I'm the guy on Facebook, doing the same job to the blue TF. Fortunately mine are not as bad as that so I didn't end up with huge holes in the floor. I do however have an enormous carpet in my bath that I have no prospect of drying out any time soon given the weather forecast for the next 4 days! It was every bit as wet as yours if not worse. Is there a particular brand/grade of silicone I should use on my snorkel? I don't do this kind of thing very often.
@Exhausted-autos6 ай бұрын
It's just the road underneath.... I hope the plastic plugs will work. The silicon is simple bathroom stuff from toolstation.
@stevemiller-hp4vt6 ай бұрын
Ah ok, I’m planning on getting under the car and finding all those plugs. I’ll give them the once over with the wire brush. Some rust converter and then Hammerite them. Seems bonkers about the way they galvanise the body and then chuck half a dozen unprotected bits of metal in which will inevitably rust!!
@patadamson40056 ай бұрын
Nice job, great vid. I agree with the clean look without the roll bars. Now back to the supercharger!
@Exhausted-autos6 ай бұрын
Thanks..... and yes the SC project will be back soon now the weather is changing. 😀
@patadamson40056 ай бұрын
@@Exhausted-autos you can have some of our weather mate. 39°C and 80% humidity.
@philhoughton76466 ай бұрын
Craig what a great video, I love working on the car myself, how satisfying to get that cleaning job done. All looks really good, it makes a big difference when it's done., after doing my own I just kept taking pics and looking at it lol. Good decision on the hoops ... I like them but I like my speakers more tbh. Not sure on the grate under the seat as any water will have travelled down on the carpet I guess but worth a try. Stroke of luck with the gearstick gator saved a couple of quid there . Good luck with the MoT how all goes well there looking forward to seeing the next video ... Phil.
@tides20026 ай бұрын
Personally I would get better front speakers (the old ones are still OEM) and forget the rear speakers, the rear speakers are too close to your head I have mine practically turned off.
@peterhawes36916 ай бұрын
great video
@Exhausted-autos6 ай бұрын
Thanks buddy, glad you enjoyed it. More to come
@seanconboy28946 ай бұрын
Lovely finish now 😊 Interesting heater control knobs. The standard issue ones are nasty. I bought some replacements for mine just got to get the trim off and and fit them!
@Exhausted-autos6 ай бұрын
I just pulled the old ones off and these push on.... didn't have to take any trim off.
@melvinphillips7866 ай бұрын
That bar is thick for a reason, looks like it's structural and rigidity. Would I cut it about.... Not too sure I would.
@user-oz4fz4mj4z6 ай бұрын
Really enjoying your restoration videos and your 'can-do' attitude. I have a 2004 TF160 which I've owned for 15 years but have had garaged for the past 7 years and am about to recommission this summer (can't wait). You've inspired me to do a deep clean on the carpets and to check for floorpan rust (when it gets a bit warmer). Even though it's garaged, I'm sure there'll be plenty of surface rust (hopefully not more advanced) like you had. I think you're right to get rid of the hoops and keep it as original as possible. Good job on the alcantara seats. Mine are the grenadine (red) alcantara which require regular debobbling too. I have the glass windstop which I'd recommend as it's effective, neat and easy to install.
@Exhausted-autos6 ай бұрын
Thanks for the nice comment.... we always have to think on our feet with these challenges. Il have a look if its possible to fit the glass windstop I have. Good luck with your work... it'll be fun.
@paulburgess86406 ай бұрын
Good content , my mgf is away for head gasket work . Think it was a bit beyond me , but h had the car long and am looking forward to driving it in summer . I'm doing the nc500 in May fun times ...
@russellmanning28116 ай бұрын
Another great video 👍🏻 I hope to get mine back on the road soon.
@russellmanning28116 ай бұрын
I think you made the right decision in getting rid of the hoops 👍🏻
@paulhodsonuk6 ай бұрын
Great work fella! I'm doing similar to my 02 MG TF atm. Regarding the pink seatbelt button, you could use a heat gun to bring the red plastic oils back to life? Might look better than paint?
@Exhausted-autos6 ай бұрын
Oooo great idea... although being careful of the pretensioner. 😀😀👍👍
@paulhodsonuk6 ай бұрын
Yes@@Exhausted-autos , I thought that after commenting. It's looking great mate, I've got a reverse light switch to sort soon so I will be looking forward to your underbody episode. Keep up the great work!
@philhoughton76466 ай бұрын
Hmm might try the heat gun method also .
@paulbrandrick8076 ай бұрын
You could go for a perspecs wind deflector they use the mounting for the t bar😅
@kenrobinson82805 ай бұрын
Bin the roll hoops go stock, roll hoops horrible bloody things
@Exhausted-autos4 ай бұрын
They're gone, I have some for sale if you're interested. 😀
@theskinnybiker59086 ай бұрын
Get rid of the hoops would get my vote
@Exhausted-autos6 ай бұрын
They've gone....
@ivanreed-qj7uz5 ай бұрын
It does look nice now..but the trouble withese cars is no matter how hard you try to rectify the problems..there's always another popping up soon after...some poor design and shocking build quality.
@paulbrandrick8076 ай бұрын
Ho dear you are aware detergents act like magnetics to dirt .the best way to clean a carpet according to the experts is clean warm water. As for making it smell fresh which of course is down to a person's tast is good old after shave mix with a little warm water again any one for brut yer I splash it all over😅😅
@Exhausted-autos6 ай бұрын
Thanks for the tip!
@mariomelo65162 ай бұрын
Friend, can you send me your email, because I have a question about the exhaust