Used this for reference yesterday. Thanks JC. Miss you terribly brother.
@infinitemindedone5281 Жыл бұрын
Thank you for providing these videos. Hope you still fly!
@FarmerFpv6 жыл бұрын
I miss you so much buddy 😥 you were always my favorite Channel and will always be my favorite ❤️ but God do I miss you so much 😢 I hope you are in a happy place 🙏
@lexxington987 жыл бұрын
lol the bardwell moment killed me haha.. keep up the great vids - alex from canada
@ProjectBlueFalcon7 жыл бұрын
I chuckled a little at myself after that. I love Joshua
@Dav21127 жыл бұрын
Alex Persaud it cracked me up too, brilliant!!
@drumrboynoid7 жыл бұрын
Nice video JC. I've got an idea for a repair video. How about a video showing how to repair a board that s had one of its solder pads ripped off. I know most of the time it's unrepairable, but it's possible to tap a wire directly to the last component the solder pad was connected to. It's a bit ghetto, but it's saved me waiting time and money. Most of the time I can just see and follow the trace on the board to find out where it went. Other times its just obvious. anyway, just an idea.
@Dav21127 жыл бұрын
drumrboynoid I had to solder the negative power wire for my littlebee esc onto the legs of a chip that was next to the ground pad that tore off, it's been flying great and I've had no issues at all with it. JC's videos are great, I wish that he would be able to answer my question I posted on here regarding my x4r, as I want to try fixing it, but I'm not sure what type of diode it was that went up in smoke.
@Tappotuoppi7 жыл бұрын
Impressive accuracy in your soldering job, i see that you have done this more than once
@sadigov7 жыл бұрын
I learned something new today. Thanks for the vid!
@collin53537 жыл бұрын
Good stuff! For those of us with just a soldering iron, would would you recommend going about this process? I might have access to a rework station at a local maker space, but the guys there aren't too friendly :/
@TheKetsa7 жыл бұрын
Enjoying the repair series... Thanks !
@kevinlloyd34037 жыл бұрын
Hi could you also do diagnosis as well for esc,s etc so we can all learn what parts are faulty I have an esc that just stops at random powering the motor and would like to know how to trouble shoot it so the parts can be replaced many thanks Kev
@Dav21127 жыл бұрын
Nice video man, I have a couple things that I need to surface mount solder components onto them here, but I don't have the tools to find out what the rating is of the components. I really want to fix them though, mainly my x4r receiver, a small diode went up in smoke on me, it is screened D3 right next to where the diode was on the pcb, do you have any x4r's that you could check to see what sort of diode it is that I need to sort it? Thanks in advance
@xtim1974x7 жыл бұрын
hi jc i have some simonk escs i tried to flash with blheli when i was doing it the led on them started dimming and now they don't work any ideas? ps thanks for all your help keep it up.
@youeladamas78407 жыл бұрын
Nice work around the camera. What's your temp on your rig that works good for you?
@FoFrx7 жыл бұрын
yea man, great work and I like the Bardwell version as well as the cliffnote version :)
@PaulSokolov3 ай бұрын
Is it possible to use this ESC without one of this capacitors ? (for example - ESC has 19 pieces - if I remove one broken capacitor)
@KyleLi4 жыл бұрын
What temperature do you typically run your hot air station? trying to figure out an ideal temperature thats not high enough to damage, but not low enough to never melt the solder.
@kip3837 жыл бұрын
Hey JC, I know this has nothing to do with the video, but can you tell me where you get your replacement motor bearings. I'm looking for some for my emax red bottom.2205 2600kv.thanks man. keep up the good videos.
@gunsmithfiamma47887 жыл бұрын
Hello my friend, thank you as always for your tutorials. I liked this video a lot, but what I want to know is, why would you change a capacitor on your esc? There is some specific issue related to a bad capacitor? Like stuttering, brown out, or similar issues? An high five from Italy
@ProjectBlueFalcon7 жыл бұрын
Capacitors dont really go bad. They just break off often, especially if you dont use a ESC protector and just have a zip tie on heat shrink. The zip ties will break them off easy. So this is just for if you're missing any
@gunsmithfiamma47887 жыл бұрын
oh, I got it now. Thank you for the explanation.
@ProjectBlueFalcon7 жыл бұрын
Yea I should have clarified. When I said the caps dont really go bad I meant the ceramic caps. With the tantalum caps you can visually see when they are bad because like Joe said, they explode or pop.
@mchaves76637 жыл бұрын
usually what happens is the caps fall off when bad crashes happen. In one of my quads I found a capacitor stuck to the eletrical tape while disassembling.
@gunsmithfiamma47887 жыл бұрын
The only time I had a problem with a capacitor, was a 220uf Polarized. I heard a loud pop while it was hovering and the quad started to behave very funny. when i opened the quad (I use almost always sandwich type frame) it was a mess inside: The capacitor puked all of its content on the ESC and I had to take it off, for cleaning and changing the capacitor.
@Markitos2034 жыл бұрын
dude any tips on how to prevent neighboring components from shifting away? for example: you need to get a component out of a mobula6 highly populated board without everything melting away on you? putty?
@rl21097 жыл бұрын
Thanks for the demonstration! Great job!
@peterkjellstrom31007 жыл бұрын
Nice video, I enjoy your repair series :-) However, you don't really have to figure out the actual capacitance in this specific case (main input bank on ESCs). Just put on as much as you can fit for the size. What is important is that you get ones that can take the voltage (battery voltage plus a healthy margin).
@ProjectBlueFalcon7 жыл бұрын
Thats true. Any size will work and the bigger the better. I just know some guys want the exact size so I turned it into a lesson. But you are correct, the bigger the better and as long as the voltage rating supports it.
@ehunter2010ed7 жыл бұрын
Peter Kjellström for sure they don't all got too be the same unless ur ocd...i tape mine so can't see the different sizes anyway😀
@jeffdeakin45077 жыл бұрын
hi JC great video keep up the great work ! could you do a video on escs that stop working when you update with blheli and it crashes in the middle of an update to try and bring it back to life . i have a dshot dys 30amp that did this ! cheers jeff
@ProjectBlueFalcon7 жыл бұрын
Will do
@CapApollo7 жыл бұрын
alt+m is the symbol in µF for micro farads .... you learn something today! :P
@juhopulkkanen7 жыл бұрын
does it matter if you flip a ceramic cap 180degrees or does it have to be the right way up
@missing.no_87246 жыл бұрын
Might be a dumb question but what would happen if you put in a slightly different capacitor?
@177jam5 жыл бұрын
Would replacing capacitors help if a ESC is causing motors to desync?
@jordanharris86727 жыл бұрын
I have a 30amp little bee esc that connects with blheli just fine everything seems to be good on it i've tried updating it and no problems but it is sending no signal to the motor at all any idea on what could cause this all my solder joints are fine i've double and triple checked them? On a side note i upgraded the quad that these esc were on to the blheli32 wraith esc and all 4 were working great before i moved them. I've even put a different esc on and it worked perfect so not wiring or motor.
@adrianau42462 жыл бұрын
What are the black flat things? I need to replace that..
@jeffvenable38457 жыл бұрын
Man that was awesome! ive got a few large screen monitors to repair too :)
@UNLOCKEDANDOVERCLOCK6 ай бұрын
❤ Awesome video I don't have any of the paste stuff. Is there a way around that?😂 Maybe just put some blobs of solder on each side... And also, can I use a jet lighter? All I have is a regular soldering iron.😂
@TeamBlindMouse7 жыл бұрын
how about one to show us how to figure out WHAT in the esc is fried..I have two KISS esc I'd like to fix but dont know where to start. I fried one trying to flash it ..the positive lead touched a component...the other one I dont know what i did.
@fishballfpv90633 жыл бұрын
Whew.. Now this is in depth.. Thanks.. I know ur up there.. Thank u thank u thank u..
@Venom97Official Жыл бұрын
Where I can buy those capacitors?
@WingStop12347 жыл бұрын
Hey could you do a video on VTX pigtail repairs, I have broken several of them and I'm tired of paying to replace them!! SMA pigtail for the TBS Unify PRO 5G8
@tommysmith29087 жыл бұрын
That was awesome JC!!! Thank you...
@MrSmithFPV3 жыл бұрын
Still great and helpful content! 👍
@26635407 жыл бұрын
Show us how to replace the internal xjt modules amplifier.. alot of guys has damaged it when doing the antenna mod..
@Fpvfixit3 жыл бұрын
Omg it's the dead legend again 🥺 💋 rest in peace j.c
@JasperTielen7 жыл бұрын
When measuring in series, does it matter if one is broken?
@ProjectBlueFalcon7 жыл бұрын
If the caps are in series and one is broken then no voltage will make it through any of them. But almost all ESCs have caps in parallel. The ones I showed in series are a rare case.
@danielpassmore50267 жыл бұрын
why didn't you mention temp and fan speed on rework station? I feel like that is need to know for anyone attempting rework
@ProjectBlueFalcon7 жыл бұрын
Sorry about that. I use 450 degrees with the fan speed dial set to 2
@RectifiedMetals7 жыл бұрын
Only thing I'm unsure of is indication of polarity of a ceramic cap. Does it matter anyway?
@dho9yds7 жыл бұрын
Project Blue Falcon tantalum caps are polarized.
@dho9yds7 жыл бұрын
Oh! And good video. well explained.
@dominikkammer24787 жыл бұрын
I have a airbot f4 clone little bee 20a bl heli(normal not s), Dys mr2205 2300kv, X- Faktor(like Alien 5). When I go to th motors tab and throttle up, at around 1300 it starts oscillating really badly. At around 1500 it starts fliping out com letely(slow twitching). It does the same thing when it's unscrew and l hold it in my hand strongly pressed so it doesn't get the high freequenc noise already did the most radical filtering but ljust won't go away. PLEASE, PLEASE, PLEASE help me.
@MaxBeamer6 жыл бұрын
How do U know if a capacitor is toast? U never mentioned that lol, would it not have continuity with the lead?
@subhanhasbiyudha54487 жыл бұрын
How to verify a mosfet works well or not?
@ProjectBlueFalcon7 жыл бұрын
I'll be talking about it when I do the mosfet video
@Tracks7777 жыл бұрын
Good video!
@darkwinter60287 жыл бұрын
eBay has cap assortments that aren't terribly expensive, it's a good idea to keep a few sets on hand...
@rotovicious11567 жыл бұрын
so how do I know witch capacitor to replace?
@ProjectBlueFalcon7 жыл бұрын
The ceramic caps dont really go bad. This video is for is any of them have broken off. The tantalum caps pop when they go bad and you can clearly see that they exploded.
@nashnazer7 жыл бұрын
Hi mate good video. when is the other 2 videos coming up please?
@DKFPV7 жыл бұрын
unfortynately, never. he had a motorbike acident 3 months ago... he is not with us anymore
@Jay_Seven7 жыл бұрын
Is there a way to install firmware if it is updated to the wrong firmware in BLHeli_s?
@TOPPeet7 жыл бұрын
Yes you can with use off a FTDI32 ore a USBASP V2.0 flashing directly on the chip.
@Jay_Seven7 жыл бұрын
The solder pads are in a L shape any way to differentiate what pad is what with out shorting something out?
@FarmerFpv7 жыл бұрын
You sir are amazing!
@alloutofdonuts39984 жыл бұрын
I was almost to tears after I pushed a cap off my teeeny tiny micro build, after rebuilding it for the 3rd time. Then I saw this...then I thought wait a sec, that sounds like PBF...then I had to take a moment...
@ISLAMguidanceful7 жыл бұрын
hey man, i actually been looking all over for this, great video, i have 3 kiss esc's that look perfect but they just dont work, nothing is fried or anything, but a component failed. do you have any videos on how to diagnose an esc, because without knowing whats wrong i dont know how to repair it.
@OutaTimeFPV7 жыл бұрын
Hussein Elsherbini Unfortunately, JC passed away a few days ago. Needless to say, he won’t be making anymore videos.
@ISLAMguidanceful7 жыл бұрын
Such a great loss, so sorry to hear that :(((
@althuelectronics51586 жыл бұрын
wery naise your case amm stading this video (sir) sooper speeche wery naise your clas am wery happy to waching this video
@h2o-fpv6235 жыл бұрын
Great video thank u
@danielpassmore50267 жыл бұрын
Hey that's my flux paste
@Wtf_drone_productions7 жыл бұрын
RIP thanks
@painedragon1287 жыл бұрын
Hi First
@j.finesseflights14037 жыл бұрын
Gr8 shit!!
@bluehawk2051 Жыл бұрын
😀
@BuzZ.7 жыл бұрын
;(
@ImaginaPower2 жыл бұрын
sorry but your knowledge in electronics is at best very limited....
@youeladamas78407 жыл бұрын
Nice work around the camera. What's your temp on your rig that works good for you?