Let's Settle This! Are Cordless Power Tools REALLY Better? Torque, Cutting Speed, Noise, Vibration

[@ProjectFarm]

Here’s the list of products reviewed. More details in the video description. Thank you! DeWalt Cordless Drill: amzn.to/3MI51IK DeWalt Corded Drill: amzn.to/3xDGT5N DeWalt Cordless Angle Grinder: amzn.to/3xCL2XS Dewalt Corded Angle Grinder: amzn.to/3xE0uml Milwaukee Cordless Reciprocating Saw: amzn.to/3Qflbwj Milwaukee Corded Reciprocating Saw: amzn.to/3QdzYYo Makita Cordless Circular Saw: amzn.to/3O3XHZa Makita Corded Circular Saw: amzn.to/3QcoioJ Ridgid Cordless Oscillating Multitool: Available at Home Depot Ridgid Corded Oscillating Multitool: amzn.to/39msvFU

[@trumanhw]

This was absolutely shocking. Great great great episode!! And ... thank you!

[@Spaniard47]

This cannot be said enough: Your test rigs are absolutely incredible! They must take a ton of time and creativity, yet they always come out perfectly, and it's what makes this channel so uniquely useful. Well, that and about 500 other things :).

[@ProjectFarm]

Thanks so much!

[@Bluesman57]

@Evan Mayer Couldn't agree more, Todd's testing is the best, He's the Wile E Coyote of the testing world LOL.

[@jaythatguyyouknow5135]

@@jasonodell608 he did catch his roadrunner but it’s name just happened to be TTI…. Lol

[@map117]

Can only agree. I kind-of hope that he's doing at some point a behind-the-scenes video, like how he comes up with a new test rig, the testing he does, but also how his place looks with all these test rigs being around and how the process is going on putting together a full review video. Love the content :)

[@paulredding1955]

Yep. Always impressed with PF's attention to detail. Excellent channel!

[@mandc20022]

Idk if people realise how much preparation and how long it took you to record this and get all the information you gathered but I am very impressed! Keep up the good work

[@ProjectFarm]

Thanks, will do!

[@misterchill]

As they say, Very Impressive!

[@matthewmiller6068]

@@ProjectFarm That could actually be a cool video of a different type, behind the scenes what goes into these test videos. You do an absolutely AMAZING job of them, and I'm quite sure I don't have a good appreciation for how hard you work to come up with these amazing test rigs that provide real-world-relatable data in a hands-on environment similar to how they would be used on an actual job site. RPMs and amps are whiz-bang easy to market stuff but your test tells me how frustrating or easy it will be to actually get the job done.

[@Abbadon2001]

​@@matthewmiller6068 this would be a video to bring to the top of the list!

[@Abbadon2001]

​@@ProjectFarm See Matthew Miller suggestion below ref a behind the scenes tour/video :D

[@LuisC7]

Best tool boxes? Maybe you can do a video ranking every single tool type from your testing. Like all in one video, a list ranking drills, saws, sanders. Everything so a new person can just get a nice recommendation

[@ProjectFarm]

Thank you for the video idea!

[@rogerheuckeroth7456]

@@ProjectFarm I like the idea too, however, maybe split it into categories. Like best hand tools and best cordless tools... Its hard though because if somebody invests in a particular brand of tools, they are likely to stick with that brand due to battery compatibility. Maybe give each brand of tools a combined rating and see which is the overall best brand. 😂 Or maybe that will make too many people upset

[@jpoplin1]

That’s gonna get expensive 😂

[@rayryngaert3769]

I think a Milwaukee pack out test would be cool

[@robs1873]

@@ProjectFarm you aren’t comparing the convenient accessibility of NO EXTENSION CORD! Thats priceless

[@johndeerekid167]

It's also important to acknowledge that tool companies have a financial incentive to improve battery powered tools and make them more feature rich than corded. They make a lot more money on batteries than the actual tools.

[@ProjectFarm]

Thanks for the feedback.

[@JoshuaSaundersAtLarge]

Yeah, batteries are the printer ink of the tool world.

[@matthewmiller6068]

I think it makes sense for the end users too though - let's face it, most people who are going to be buying LOTS of tools and batteries are probably using them all the time on job sites with possibly inconsistent power accessibility and still demand high performance or they'll shop elsewhere. For people using them all day every day the convenience also saves them time and money making the higher price worth it for corded power without lugging extension cables or generators. As a DIY person, I might use a circular saw a couple times a year...I have a tough time stomaching $200 for a cordless one that I will probably use in my garage or back deck next to a plug anyway, and I'm also willing to accept slightly lower performance in a lot of things if its 1/3 the price and is sufficient for the job. If I really need to use it farther out in my yard, I can drag out the 12 gauge extension cord for that rare time.

[@TristanJCumpole]

@@JoshuaSaundersAtLarge They certainly are an ecosystem. Big companies like TTi produce battery tools for several brands such as Ryobi, AEG, etc. yet they're all incompatible with each others battery series.

[@sleblanc]

Yes and no. Markup on both tools and batteries is very high (think of all those "buy a set, choose one for free" types of deals). Batteries don't account for nearly as much revenue, as the typical homeowner can buy the whole lineup of tools and still get by with two 2Ah batteries and one 4Ah. No need to get tens of batteries if you can only use one tool at a time. Yes, contractors buy a lot of tools and batteries, but 1) I feel like they go through tools faster than they go through batteries; 2) homeowners buy a lot more tools than contractors -- the construction company does not have a circular saw for every employee for instance.

[@chris2007a]

I personally feel like corded power tools don’t get the same love when it comes to R&D anymore.

[@boomerangfreak]

No which is 1 of the reasons they're usually starting to fall behind. Just look at the corded tools and they just look cheap! Like why are so many corded tools still made with brushed motors??? There are some exceptions tho, I have a dewalt DWE4357, which actually IS a premium corded angle grinder. Has all the bells and whistles and it has 1700 Watts of brushless power for it's 125mm discs. I bought that one mostly for wire brushes as it has variable speed and I can tell you it certainly isn't a slouch!

[@andrewk8636]

Yep, if they put brushless motors on corded saws they'd rip but tbh there is very few uses for cordless saws now outside of stationary tool or super high drain tools

[@rockspoon6528]

Companies get a heck of a lot more money from cordless because, once you buy one tool with their battery, you're much more likely to buy the next one from them so you can use the same battery.

[@rc-daily]

Yep its all about getting you hooked onto one battery since the battery is what costs so much generally. After you get a few tools of one brand you'll continue buying that brand for the battery.

[@mikehall5657]

@@andrewk8636 AC motors are already brushless. A DC brushless motor works in a very similar way to an AC motor which is inherently way better.

[@rondj1965]

Being in new construction as an electrician, battery powered hand tools are a must. Everyone has an opinion on what brand and type of tools are the best. I’m always glad to know that someone is putting these opinions to the test in a fair, accurate and unbiased manner. This has got to be one of the best channels on YT for tradesmen. Great job as usual.

[@1pcfred]

Electricians are team red and carpenters are team yellow. That is what is best.

[@lolatmyage]

Makes sense if you're often going from room to room and there are no outlets available _because you are installing the outlets_

[@markp8295]

This and tool box buzz are the channels I use before making a purchase.

[@1987FX16]

I mean yeah for cutting conduit and screwing screws then battery is okay. But if your cutting 2-4 inch cores all day or cutting 250+ 4x4s a day than that's not the case unless you have like $10,000 worth of batteries. A $500 generator and $100 worth of 10g exstenton cord is WAY less than even 2 sets of batteries to run a sds max hammer drill or skill saw/sawall. They both have their application. I like battery, it's more portable. But for a skill saw or sawall or grinder especially a 7in grinder then plug in is what I reach for.

[@ProjectFarm]

Thanks so much!

[@mtadams2009]

I own both corded and cordless tools and enjoy both. The big plus of the corded tools is twenty years from now they still work fine and I don’t have to worry about battery issues. That said I often use my cordless tools for ease of use, no cord.

[@ProjectFarm]

Thanks for sharing.

[@sleblanc]

That is true. I bought a Hitachi corded hammer drill about 15 years ago. I abused it a lot. I still have it, and it works just as fine, while a cordless Dewalt drill I bought two years ago has issues with the speed control.

[@Senkino5o]

True enough, but if you run a company you can go through 4 grinders or drills in a couple hours in the wrong hands or environment.

[@supermr2]

Came here to say the same. Still have some of my dads corded and air tools from 60 years ago. My cordless stuff be in the trash in 10 years because of battery issues guaranteed. Not because of anything nefarious its just the tech is in the batteries keep getting better. Backwards compatibility would be great but the tool company has no financial incentive to do so when then can sell you brand new tools.

[@GazMatic]

Same here. One thing they have thought about is getting people stuck in their ecosystem. I buy the same brand just because I already have the batteries

[@kd4pba]

You will always go far with honest scientific testing. This channel is pure gold for the consumer.

[@ProjectFarm]

Thanks so much!

[@AJ-ln4sm]

It seems like the manufacturers have put more effort into improving the cordless tools than the old technology corded ones. Good video!

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@ConstantlyDamaged]

There's also the restriction that for a mains tool to use brushless motors, they'd have to first convert the power to DC and bring down the voltage. That kind of circuitry is both expensive and bulky. They use cheaper AC motors in the tools (that don't have the same features as high power DC ones) instead. With cordless tools, your mains step-down hardware is all handled in the charger, a central device that you only need one of.

[@ethansprojects7399]

@@ConstantlyDamaged why must they bring down the voltage? If anything rectifying the ac should raise the voltage because the capacitor used in rectification.

[@Sevalecan]

@Damaged I do not believe your assertion is correct. A brushless DC motor in a given tool will be wound with the given supply voltage in mind. In the case for battery powered tools, typically anywhere from 18 to 60V being your bridge voltage depending on what you've got. There are some brushless corded tools being released by manufacturers such as DeWalt's DWE43240VS , though mine has been on backorder for 2 months because I don't want to be extorted by Grainger to get it sooner. I'd like to verify some of the design elements in it, but I don't have it. Having said that, a BLDC motor can be wound with a higher DC bridge voltage in mind, making it possible to drive such a motor from a rectified AC->DC converter with no DC to DC voltage conversion being involved. The inverter(Part of any BLDC system) will then simply change its PWM duty cycle as it drives the motor phases to control current, which will control torque, which will control speed with the assistance of some feedback (motor position preferably for speed, but depends on implementation... and current sensing for the other primary feedback signal). The manufacturers have just been pushing this battery crap on us as hard as they can, so it's more a function of R&D not being directed toward corded tools. Corded impacts tend to have pitiful torque ratings compared to their battery powered counterparts, for instance.

[@YDCFF_]

I remember when the corded saws were categorized by HP. Then they went to amps. It sounds crazy, but one of those old school HP rated circular saws will run circles around this new stuff. I had to make an 18' long stringer for an old victorian home I was remodeling. No One had a piece of oak 16" wide and 20' feet long. Finally my customer found one at an old redneck saw mill in the middle of nowhere. It was rough cut. Literally a slab cut off of a massive oak tree. It was about 2 1/2" thick and uneven widths. I had to make a straight piece out of it. My customer had a big table saw. (mine was at home in the shop). We tried to run it through it and it bogged the motor down. I got out my old school circular saw. He looked at me like I was nuts. He said you can't use that if it bogged down my table saw. We struck two lines (one on each side.) That old saw cut through that oak like butter. He was tripping. I then had to plane it, sand it, stain it and varnish it. It came out beautiful. My customer gave me a $500 tip when I finished that stair case.

[@deletdis6173]

Every Sunday morning before Todd posts a new video, I find myself watching his old ones to pass the time.

[@ProjectFarm]

Awesome! Thank you!!

[@MyWasteOfTime]

Each tool has its place. I select Corded tools when I have a lot of cutting/work to do so I don't have to keep changing batteries. Also, Corded drills always cut the same unlike battery tools when the battery gets low. Thank you!

[@CommodoreFan64]

Agreed 100%, and another advantage of corded tools is if you only use your tools on occasion you don't have to wait for the batteries charge up, or worry about if they have gone bad on you having set around, just get an extension cord, and get to work, plus overall corded tools are cheaper to buy if you are putting a garage/workshop together on a budget.

[@tonysheerness2427]

Also if you only do something now and then not often corded tools are better always on hand and always work. Battery tools tools are good if you use them a lot and have more than one battery.

[@busaj383]

Buy extra batteries and you'll be good. Yes, they are expensive but I have a job and my convenience of not moving a cord around things is well worth any amount I need to pay 😉 Good luck to U out there! 👍

[@chubbyjohnson5480]

Exactly. Like that taco kid said, why can't we have both?

[@jaynelson4175]

I like cordless because when you release the trigger it stops very quickly. I've broken a few drill bits with a corded drill (tried to break my wrist).

[@AdamPlacek]

Would love to see different wire connector tests (wago 221’s, traditional wire nuts, etc.) Thank you for such thorough reviews! Keep up the great work.

[@porterfielddynamics]

Definitely second this.

[@ProjectFarm]

Thanks, will do!

[@NiHaoMike64]

Great Scott already did it.

[@Wowzersdude-k5c]

Several people on KZbin have already done comprehensive tests (Great Scott did it and another guy did as well). Both tests were exactly the same. Wire nuts give less wire resistance than any of the other connectors (the wire heats up less and less power is lost as heat). However, all three types of connectors are legal under the NEC, so it will be up to your local codes or who you're working for.

[@peterboyne6871]

What about a showdown between the battery chainsaws, string trimmers, and lawnmowers vs the gas ones? That would be interesting.

[@ProjectFarm]

Great suggestion!! Thank you

[@Jorian1107]

Yes, great idea! Replying to get behind this idea and have it go to the top! ;-)

[@Doc__Vegapunk]

Been hoping for a string trimmer video. I need to buy one soon, and I don't like to purchase tools without consulting this channel first 😂

[@lewiemcneely9143]

@@Doc__Vegapunk He just did one on string trimmers.

[@HariSeldon913]

@@ProjectFarm I'm surprised you didn't compare the maximum run times between the cordless and corded tools. 😺

[@peterallen4605]

The big test for me on most of these tools is how they will compare in 10 years. The cordless will be near useless unless I get a replacement battery, and that assumes that they haven't moved on to a different style of battery by then. The corded one will still work.

[@ProjectFarm]

Thanks for the feedback.

[@dwayne7356]

I have corded tools that are 30 years old. I have gone through 4 cordless drill, mostly because of needing battery replacements. I prefer corded for this reason since I am a DYIer and not a professional using these daily.

[@bigdanwess]

@Peter Allen : Exactly my thought !

[@neoasura]

This right here, when I got on my own back in 2009 I bought cordless power tools, but they were still Ni-Cad, of course a year later Lithium Ion came out, I couldn't afford to replace my tools, eventually all my NiCad tools crapped out. My dad on the other hand still chugging away with his power tools that all have to be plugged in..tools that are 40 years old. I went all corded since. Aside from my Impact Driver since I use that solely for portable jobs.

[@BL-yj2wp]

@@neoasura In 2009 lithium ion power tools were around, but even those weren't close to what they are today. And they were expensive compared to today.

[@tiredoldmechanic1791]

Todd has figured out the perfect way to acquire all of the tools without having to justify it to his wife.

[@deadringer2349]

Yep. Just pull out the "for educational purposes" card.

[@TheTheRandomShow1234]

I don't think his wife's complaining considering the revenue this guy makes is close to a million a year

[@deadringer2349]

I think the joke went over your head.

[@simon-pierrelussier2775]

It's for science!

[@meikgeik]

Or learn to respect your wife. If it feels like a constant battle over funds, you're probably doing something wrong. Split bank accounts + a joint bank account for bills works wonders.

[@dingledingle6896]

I base all of my tool buying decisions off of your videos. Seriously the most useful channel on KZbin.

[@ProjectFarm]

Thanks for sharing!

[@thegrimmperspective]

An expensive round of testing!! Kudos to Project Farm for their dedicated research.

[@ProjectFarm]

Thanks!

[@keithwilliams2353]

​@@ProjectFarm Are there any examples where a corded device exists in the same price bracket as the cost of a cordless device + battery? I would like to see that comparison and I feel it would be more fair than comparing the devices at a set price point and treating the battery cost as a separate thing. Part of the price of the cordless device is the manufacturers assumption that you will be buying their battery, and its pretty obvious there is a lot of margin baked into the cost of these battery packs.

[@AndrewHague14]

Unfortunately its just not like for like as per the purpose of the video. Most tool brands now have a dedicated range that is corded tool power in a cordless version - in this video dual 18V Makita ,however in the angle grinder test for example a 800w cordless vs a 1342watt machine or 1.8 horsepower makes it an irrelevant test and as such the results showed. If the flex volt cordless grinder was used it would be far more comparable at circa 1500w. Same in the multitool test, the brushless rigid model would perform more comparable to the corded one in this test. He does do a great job overall but some of these inconsistencies can be a tad misleading, just something to consider before drawing any conclusions.

[@MarksTech]

the amount of work this guy goes through is mind-blowing. to be honest, I dont even care about power tools but I still stayed and watched the entire video lmao. its always interesting. thanks!

[@ProjectFarm]

You are welcome!

[@timswanson9152]

I definitely prefer corded angle grinders for zip cutting metal with the power that they have. I also like the capability of cordless when working on site

[@ProjectFarm]

Thanks for sharing.

[@blackwidowsm]

Totally agree grinders need accorded power for peak cutting and grinding amps he. Cordless simply don’t last in real work environment uses. I have both. My favorite in a 1966 model that’s now illegal on most job sites it’s it’s so industrialized strong made of heavy duty metals no plastics in this than again takes a lot of strength to use it. But for heavy duty jobs nothing can keep up with it. The cordless one I love the dewalt and it’s light enough my daughter uses it. Hint she can’t carry the 1966 model 😂 I admire her effort to be like dad. Lol dewalt an outstanding cordless jyst no cordless is equivalent to a corded tool for stamina. Batteries die electricity is consistent.

[@minastzannetos5619]

@@blackwidowsm pop

[@DavidStapley0982]

I own both an old school 15 amp metabo and a Milwaukee cordless one. Plenty of torque with the Milwaukee the only thing is the battery does eventually run out.

[@helloman3676]

@@DavidStapley0982 Thats why you have multiple batteries....

[@InCountry6970]

I have watched many of your in depth reviews of products over the years and they are great. I am only disappointed that you don't have your own review channel on TV, they are that entertaining.

[@ProjectFarm]

Thanks for watching! Thanks for the feedback.

[@stevekovacs4093]

I have a 3/8 variable speed reversing drill by Milwaukee. It's corded, and it was purchased in 1978. I have replaced the trigger and power cord. It still works just fine for driving screws. I can't tell you how many cordless vsr drills I've bought and thrown away over the years, the main reason being battery obsolescence and tool quality. I still use my Dewalt cordless tools all the time, but I doubt they'll be around in another 40 years, but I bet the old Milwaukee will be.

[@ProjectFarm]

Thanks for sharing.

[@ericharris893]

Correct

[@BitSmythe]

Steve, try the Ridgid. Fabulous power, and you can’t beat the Lifetime Guarantee - batteries included. Oh, and it has a 1/2” chuck. You’ll never appreciate driving screws more, especially NOT having to drag an extension cord up a ladder.

[@patcb829]

I would just like to add that corded tools can be found at garage sales, marketplace, craigslist, etc for pennies on the dollar in good shape. Keep up the great work.

[@feedbackzaloop]

Cordless from 10 years ago are not expensive too. And there are inexpensive off-brand batteries for them as well

[@ProjectFarm]

Thanks, will do!

[@ronblack7870]

@@feedbackzaloop those are not lithium ion but nicad. those really suck.

[@feedbackzaloop]

@@ronblack7870 NiCd are good for those under 10 bucks they are sold for. But still, there were li-ion already. Still have a couple of 12v Bosch from 2009 (compatible with recent batteries, of course)

[@patcb829]

@@feedbackzaloop Very true and cross platform battery adaptors are available online as well.

[@Dansk55]

Been waiting for this. I personally prefer corded for demanding tools like air blowers, sanders, etc cause batteries are expensive in the long term. But impact wrench and drill definitely battery. Edit : the 10amp or more on corded was useful info too

[@redlinegme593]

For home, battery. I'm lazy as hell, I take out a battery powered tool much sooner. No cable, extender, outlet searching... Click, do, forget. In work however, we need punch, we usually already have a power source nearby, so mostly corded.

[@annihilator4000]

​@@redlinegme593 absolutely. I've procrastinated small home jobs because I didn't want to go get a cord and deal with it.

[@ProjectFarm]

Thanks for sharing.

[@ronblack7870]

impact wrench for serious torque i always go air.

[@Dansk55]

@@ronblack7870 Yeah no doubt. Air is king for max torque. Especially Astro Onyx THOR in 3/8 or larger line

[@mike-drums-maine]

I have a new appreciation for your channel due to the [NO SPONSOR] production. Most all channels are choosing to give their own infomercial for 2 to 5 min. during the video post. Bad enough that KZbin runs additional adds. A+

[@ProjectFarm]

Thanks!

[@lonewanderer3603]

This was an interesting test and shows how far the tech has come in the last 20 years. Even if the corded tools had won every test though, it wouldn't really matter because many of the job sites I go to don't have any power or there's only one spider box for everybody to share. I remember the old days of running 100's of feet of extension cords or air hoses. What a nightmare. Now we even have cordless compressors if a guy wants to run air tools, but I switched to airless nailers long ago and will never go back.

[@iwinrar5207]

I don't want a box full of spiders.... Just set it on fire.

[@jonathanb1987]

@@iwinrar5207 🤣

[@D-B-Cooper]

You still need to charge.

[@HobbyOrganist]

@@D-B-Cooper You can do that with a small portable generator or even solar panel

[@ClarkeSLR]

exactly.....when I first started, I was debating corded or cordless. Both have their merit. However, cordless tools are a must for me for the same exact reason you mentioned. I would have lost many job opportunities and generator noise and fumes in enclosed areas is a no for me

[@jackmacphail5324]

You are a legend Todd… another great video, with meticulous research and effort put into the end result. I truly believe you are the most accurate and entertaining tool review channel out there. Keep up the good work. Watching from Prince Edward Island, Canada.

[@ProjectFarm]

Wow, thank you!

[@CrippledEagle]

Cordless tools are so much more handy than corded in so many cases. Anyone who has climbed a ladder with a corded tool knows the frustration of having the cord come apart as one gets in position to utilize it. With battery technology advances the ability to use battery powered tools a real plus. When I started building housing with Habitat for Humanity I bought my first battery powered drill, a DeWalt 14 volt which one needed multiple batteries. Nowadays I keep a couple of 20 volt batteries for my 1/2” impact and my 1/4” impacts. I still use corded for building things on my sawhorses where I don’t have to carry up a ladder. Great video!

[@ProjectFarm]

Great feedback! Thank you

[@1pcfred]

You're supposed to tie the extension cord to the tool. You don't count on the plug holding things together. What's the matter with you! You tie cords off.

[@lanedexter6303]

Wow, thought provoking comparisons! Thanks. My cordless 7-1/4” saw can’t match the power of the worm drive I bought in 1977, but it’s easier to carry and very handy when there’s no power nearby. Both types of drill motors have their uses. “Obsolete” older corded drill motors are cheap, and very handy for wire wheels, flap wheels, etc. The cordless spends more time driving screws and even mixing paint than it does drilling holes. I have corded tools from the 60’s, the 70’s and the 80’s. I wonder if any of my cordless tools will last 50 years.🙄

[@ProjectFarm]

Thanks!

[@phoxpharms]

I can't get my cordless tools to last 5-10years let alone 50. Nothing is made to last forever anymore. Now that we let China make everything, 1 year is a win.

[@Max_Arjona]

Would like to see how the corded adapter for dewalt’s cordless tools compares to a true corded tool and a cordless with a battery.

[@ProjectFarm]

Thanks for the suggestion.

[@mobilePCreviews]

check out torque test channel, they tested this already

[@deuswulf6193]

I been wondering why they never had those, and with your comment I realize they did finally add such an attachment. Seems like a logical choice over the old corded options.

[@dougc.3998]

Great show, I don't use a cordless tool often enough to justify a large difference in the price of my tools. What you showed me is some of the cordless tools are worth buying over the corded models. What is also an expense that was not discussed, was the price of extra batteries and how often they need to be replaced when they have reached the end of their service life, for that reason I usually go for the corded tools. I got burned when the Milwaukie 18-volt tools went to a new style of lithium battery and would not work on the older models. I also like the older corded models because you can find them at yard/garage sales, and they work as well as the newer tools for pennies on the dollar.

[@ProjectFarm]

Thanks! Thanks for sharing.

[@ryankorte8601]

I'd bet by this stage in the game, you have accrued a collection of power tools that is second-to-none, and many would consider "very impressive!!" 😄

[@BitSmythe]

True, sir…. But many of them have been destroyed by the others. And a great pile of material for recycling LOL. I think next he might review storage sheds.

[@leukemia3246]

probably returns them the next day

[@surveyingfleaproductions]

Still one of my favorite channels! Raw tests and Data, presented in a way any layman can understand. You sir, are awesome. Thank you for taking the time to create these videos. Hope you thrive

[@ProjectFarm]

Thanks and you are welcome!

[@rcl3514]

Something I noticed is that when you were comparing sawzalls, the battery operated one, the shoe was coming off the 4x4. That could account for longer cutting times also, as the throw length would be reduced, since the saw is now vibrating, (instead of being steady on the 4x4) along with the throw. It also almost seemed like the blade was catching or having a hard time on the nails, which is when I noticed the shoe come off the wood, and the downward movement slowed, until the nail was cut. The corded saw, looked very smooth and steady by comparison.

[@dzydvl76]

I saw the same thing, the other thing I noticed is the angle changed when the show bounce happens.

[@colbywood8113]

He also compared a regular Sawzall to a Super Sawzall so not exactly the same too

[@wildwildwilly91]

Really think he could keep the shoe 1 32nd of an inch off the 4x4 like that if he tried. The shoe was being pushed off. The corded super has a ton more torque, that will keep that thing steady. Not a corded guy either just saying.

[@xXRacer9000Xx]

this is completely true, you have to push "in" with a sawzall to get a good cut. if that shoe is not firm against whatever you are cutting, than it doesn't work too well. the downward force isn't as important as keeping that shoe against the material.

[@MapleMan1984]

@@colbywood8113 the price

[@gernhartreinholzen3992]

An important fact, that is often missed is at these tests, always new and fully charged batteries are used, but they don't stay that way when using them. And if you forgot to charge them, you can't use the tool at all for hours. When using corded tools, you always have 100% power.

[@MattTrevett]

This is really an excellent point. The speed and torque of battery tools is highly dependent on voltage, which drops in a linear fashion until near the end of battery life.

[@Naeromusic]

But at the cost of portability though

[@aaronwalker2588]

By hours you mean half an hour right?

[@jamie-ck6js]

Surely if you are planning some DIY or are a professional having a charged battery is just part of the preparation? I mainly have corded tools, but I specifically purchased by cordless Hitachi driver where the battery has very low self discharge so can sit in the cupboard for literally years and is ready to go when I need it.

[@hakont.4960]

Several hour charging time dates back to before lithium batteries were common, more than a decade ago. A lithium battery can reliably be charged in much less than an hour, certainly won't take several hours. Battery powered tools aren't always ideal though, I'll agree to that. For driving screws and light cutting my battery drill and battery circular saw are ideal. For heavier cutting or just cutting a lot in general I prefer my corded saws. For metal drilling you can't beat a good old corded drill press.

[@harleyjones5200]

Its been my theory for a while that many manufacturers have shifted almost all of their R&D and innovation to their cordless lines while basically just rebadging their older corded gear with the new years shapes and decals etc. Its incredible how far cordless tools have come over the last 5-6 years.

[@ProjectFarm]

Thanks for sharing.

[@bekanav]

Corded tools are finished products. I have several from 1960's: Metabo circular saw, high torque drills (AEG, B&D, Metabo), B&D sheet metal cutter etc. Metabo saw was first used by my grandfather, then my father (both professionally) and now I use it. The quality of that time German tools is unsurpassable: full aluminium body, second plastic cover inside that (for full electric insulation), protection against over heating, oil filled gearbox (yes, you can change gearbox oil), big ball bearings for durability, very finely balanced for minimal vibration, fully epoxy coated wiring inside the motor, thick rubber cable etc

[@sunn_bass]

It's not just a theory. I read an article a couple years ago saying most R&D is going into cordless because that's where the market is going.

[@actionjksn]

I said the same thing R&D has completely quit on most corded tools and it started years ago. If you had corded and battery operated with equal engineering those battery tools would get smoked by the corded ones.

[@ZE0XE0]

thats almost certainly what's happening. Theres no reason with as many amps and volts as a wall outlet can provide that a corded tool should be weaker than a battery powered tool. Any difference in power in the corded tool is clearly due to lazyness on the manufacturers part.

[@gora876]

This generation and perhaps the next couple generations owes you a lot. You are a beacon. You are what Dept. of Consumer Affairs should have been in the first place.Take a bow. 🙏🙏🙏

[@ProjectFarm]

Thanks!

[@Bensam123]

Definitely looks like manufacturers are focusing more on cordless tools instead of corded ones. The margins are much higher when you're selling $100-200 battery packs which can be just as expensive as the tools, in addition to the tool, so they put more effort into them. One thing that wasn't covered in the video is endurance. I'm sure this is a no brainer for a lot of people, but if you're working on a construction site, tools will be used for prolonged periods of time which means battery endurance really matters. Lithium is pretty good at delivering full performance right until it runs out of juice, however if there is a loss in performance over time with the battery, or if the batteries overheat during extended cuts/grinds/usage, it will really detract from it's value.

[@LC-hd5dc]

this is exactly why i never buy batteries from the manufacturer, far more cost effective to "roll my own"

[@ProjectFarm]

Thanks for sharing.

[@LordSaliss]

Not just endurance of use, but also longevity of the equipment. I still have quite a few corded tools because I really hate buying a new battery or two every 2 years because the cells are wearing out and only last 10 minutes of use by that point. It really adds to the cost when replacing batteries instead of just getting a corded tool out down the line and not having to worry about a thing The only battery tools I keep around are a ratchet and a drill, because those tend to be things I care enough about the quick ease of use to justify.

[@AFriedChicken]

Client I just did a job for bought a battery operated lawnmower (green and black but I don't think it was Ryobi). $350 for one of those batteries. He said he got around 2 hrs out of it, called, complained, they sent him another and said to throw the initial one away.

[@jaklumen]

@@AFriedChicken Greenworks, maybe?

[@mrallan8063]

Yup. Your closing statement says it all... if you are close to an outlet, corded is ok... but if away from an outlet, battery is best. Just like a desktop computer vs a notebook... corded is generally better, but cordless wins on mobility. If I could can buy only one tool, cordless is my first choice.

[@feraldog5590]

Also depends how long I'll be using the tool. The longer you use it, the weaker the battery gets, corded is better even when not close to an outlet if you plan to use it all day or even a lot of cuts/holes/grinding

[@bonedaddy33]

Id much rather use a desktop computer

[@svenjorgensenn8418]

Batteries are expensive

[@FieryWACO]

@@svenjorgensenn8418 And toxic

[@altokers]

eh completely depends on what you're doing. If it's a big job with access to power i'd never bother with battery tools (drills being the exception) You're not going to see battery powered miter and table saws at construction sites.

[@jaywest4102]

Can you please test gasket makers and Different gasket materials?

[@ProjectFarm]

Thank you for the video idea!

[@BattlestarCanada]

Yes. This would be helpful for sure!

[@liamwinter4512]

Leather gaskets and cork would be interesting

[@danky-_-stanky4500]

I’d like this as well! 😁

[@billynomates920]

yes. great idea! 👍👍👍 sealing / gasketing is one of those horrible, messy and usually fairly urgent diy tasks that if you get wrong, the consequences are even worse and you have to start over with what little gunk you have left from before. i'm gonna stop now because there are too many double-entendres but a good video suggestion. 😉😲

[@buidelrat132]

If you ever have a garage sale for your old equipment I'd definitely be there 😉 Your tool collection must be massive by now! Thanks for all the tests! 💚

[@ProjectFarm]

Actually what I don't save for future episodes I donate in my community. You are welcome!

[@RentonFree]

@@ProjectFarm Wow, this guy is amazing!

[@MAGAMAN]

For the Drill test it would have been nice to see a test using the drill as a drill, with something like a 1 inch auger bit. Corded drills are designed to be drills, not screwdrivers or impact wrenches, so seeing it doing what it was designed to do would have been nice.

[@ProjectFarm]

Thank you for the feedback!

[@McBlazington]

That's what I was thinking. The corded doesn't have a clutch. I'd also be interested in comparing the hammer action of a corded vs cordless. I have a feeling the hammer action on the corded drill is much larger than the cordless.

[@chrismader3689]

Great comparison! Something that makes a cordless drill better is the brake, even without anti-kickback they are more manageable if a bit binds up. I’ve got a corded Milwaukee that will put you into a death roll like an angry crocodile.

[@giggiddy]

Lol. Me too with the Milwaukie. Enough torque to twist my arm right out of its socket if I'm not careful.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@1pcfred]

I have a big pipe on my triple reduction Milwaukee D handle HD drill. Because she's got a bit of torque to her.

[@davidstreling3690]

but that corded drill will go all day not the battery ones and not as strong

[@EricLS]

My Milwaukee corded fuel about does the same thing, seems to be the nature of gear reduced high power drills.

[@robohippy]

Never considered time to come to a stop. Of course the battery tools will stop more quickly. Makes me think of bandsaws with cast iron wheels that spin for a long time after turning the tool off. The good ones have brakes on them. For sure this would be a safety factor. Thanks!

[@timrankin8737]

I swear my 16 inch band saw takes 5 minutes to stop.

[@ProjectFarm]

You are welcome!

[@rsbreeze]

​@@timrankin8737 but its very satisfying to listen to that hum continue on and on.

[@edewaal97]

Not only safety, but less chance of damaging something. The angle grinder we have at home takes a long time for the blade to stop spinning. We have damaged our outside table and garage floor by putting the angle grinder down before the wheel stopped spinning.

[@jmanbball]

Makita does make corded saws with an electric brake. This isn't exatly an apples to apples test.

[@poulos341]

Love your work. Your summary at the end was perfect. Go with the corded tools if price is a factor, you will get similar output. If you need mobility and can pay a little extra get a cordless tool. And always use the right tool for the job, as per the geared vs single speed drill result. As a DIY/home user I buy corded for most tools to avoid having to buy and manage batteries.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@marcogeraldis7117]

Pretty easy answer in my opinion...corded last longer and stay consistent powerwise but cordless are more convenient but only for a shorter period

[@ProjectFarm]

Great point! Thank you

[@WetDoggo]

Cordless is always more convenient, but cords exists for a reason. Headphones for example 😅

[@dcmirk]

Did we watch the same video? Cordless have so many more improvements over corded. All the innovations are put into cordless, while corded have been made the same for 20 years.

[@marcogeraldis7117]

@@WetDoggo thats kinda what I was saying haha

[@kylzepolaczkowaty2197]

@@WetDoggo Bluetooth headphones and speakers

[@TristanJCumpole]

I've always said that there's nothing really to settle in this debate. You choose the tool that is appropriate for the job and accept that differences are there, and that they actually represent advantages instead of "this is better than that". Corded wood routers are more stable than their battery equivalents, battery tools are safer if there is a chance of the tool getting wet. Pick your battle.

[@ProjectFarm]

Thanks for sharing.

[@kenfuciusfpv2800]

I might have missed something, but I don't think routers were covered. Might be a good suggestion if they weren't.

[@TristanJCumpole]

@@kenfuciusfpv2800 Illustrative examples, nothing more. The principle applies.

[@kenfuciusfpv2800]

@@TristanJCumpole well it seems that from Todd's tests things are decidedly better or worse than other things. It seems to be specific to which tools are being tested. Routers were not tested.

[@TristanJCumpole]

@@kenfuciusfpv2800 Unwind a bit! This is about corded vs cordless.

[@BobBlarneystone]

A cordless drill is one of greatest inventions of the 20th century, and my 9.6 DeWalt from '94 is still in use for my daughter. Other than that, I'd probably go with corded for many tools if line power is available, because cutting speed is not an important feature for me. And I speculate that the corded tools have not had many design upgrades that would make them comparable to cordless tools for some features. Also, except for the Ridgid brand (free battery replacement is included), all of the cordless tools will need batteries replaced at some point which can be a price factor too.

[@TimberTrainer]

Wow, the tool tests are great, but I really appreciate the test tracks. Your attention to detail and pursuit of consistency is impressive.

[@ProjectFarm]

Thanks!

[@kevinthompson2308]

Since the cost of energy is the topic of the day, I was actually thinking just a few hours ago about the efficiency and cost to run between corded and cordless. I bought a hedge trimmer this morning at Home Repot. I opted for the 120 Volt AC model rather than a cordless. Saved a hundred bucks and I don't mind dragging a cord around since it will be used only once a year. A hundred bucks saved can go to gasoline rather than a little convenience.

[@lewiemcneely9143]

Yes! A gallon and a half in the hand..................

[@1pcfred]

Hedge trimmers are the nemesis of extension cords. They're practically made to cut them.

[@kevinthompson2308]

@@1pcfred good point! I hadn't thought about that.

[@ProjectFarm]

Great point!

[@lewiemcneely9143]

@@ProjectFarm I had one for the Echo convertible that the son-in-law now has. It worked FINE as long as we had a hedge. Took it out for a geezer ramp. Progress?

[@user-cs1ne8gx9u]

It's pretty amazing just how good battery stuff has gotten in the last 10 years. Thanks for the great work.

[@ProjectFarm]

Thanks for watching!

[@drew5334]

One benefit of corded tools is they're a bit of a pain to move around the jobsite, which actually encourages you to work more efficiently by setting up your work space efficiently, and working systematically by making all your cuts in one location before moving onto the next With the ease of moving around with cordless tools, I've found that sometimes it actually leads to a lot of wasted movement because you can move from task to task without finishing up one. The freedom is obviously super handy in many cases though, just an interesting thing I noticed. Also, the durability, cost, and the ease of repair of corded tools is UNMATCHED. So for workhorse tools, like skilsaws, sawalls, nailguns (pneumatic), vacuums, etc, I prefer corded. For impact drivers, drills, osc multitool, etc I prefer cordless.

[@ProjectFarm]

Thanks for sharing.

[@johnsmith-by3yg]

hahahahahahahahahahahaha

[@Onlychillpodcast]

Maneuverability should’ve also been a key factor for tools like the sawzall, jigsaw, and angle grinder, not to mention workplace environment is a whole ton better then having plenty of cords all over the place

[@WHSHAFT]

You have always done a good job testing tools, but I feel on these test you took it to a whole new level of professionalism. A++ Always love your content...

[@ProjectFarm]

Thank you very much!

[@Meatwad.Baggins]

I have used about every angle grinder out there and I have to say I still get more work done with the corded grinder when paired with a hard wheel, flap wheel, paint remover, and wire wheel. However as far as cutoff wheels go, which account for 90 percent of my shops injuries, I have not had a single injury with my battery powered grinders. That 11,000 rpm dewalt grinder you used is banned from my shop because I find it to be too fast for cutoff wheels. I have seen it explode a new cutoff wheel by simply turning it on.

[@MAGAMAN]

Stop buying your cutoff wheels at harbor freight?

[@Meatwad.Baggins]

@@MAGAMAN Lol. I dont buy them from harbor freight. I buy them from a welding supply store. The point is that after tens of thousands of cutoff wheels the only one to explode without ever touching materials exploded on the highest rpm grinder that I have ever owned. I dont think it was a pure coincidence. This is the only time I tossed an angle grinder injury to error in manufacturing of an abrasive. And i probably wouldnt have arrived at that conclusion if i dodnt see it for myself. I think that after you consider error in manufacturing and error in tool operation the margin of allowable error is reduced as rpm increases.

[@Original_Old_Farmer]

It seems to me that the tool industry has changed over the years with what is being offered. Maybe compare corded plastic tools with the corded metal body tools of the 50s. I have a Sunbeam hand drill that will rip your hand off with all the torq it provides. It's a standard size, a typical DIY tool. That's why, when I can find them at garage sales I will pick up the metal body power tools for use in the shop. It isn't hard to replace the brushes in motors.

[@ProjectFarm]

Thanks for sharing.

[@robertliskey420]

A little note they still make pro grade you just have to go to a pro tool store I have one where I live the first thing you notice is where they are made. Example a Bosch jig saw big box China mine Switzerland.

[@FJ80Coop]

I've got an ancient Craftsman power drill that'll break a mans wrist in a flash if he isn't careful..

[@toddac61]

If you want a drill I am going through my fathers estate and he had a sears metal drill with a strap on drill press adapter and probably a few more old tools also if I can ever dig them out.

[@Original_Old_Farmer]

@@toddac61 Thanks for the offer. I think my wife will do a bit more than a frown if I actually bought another drill, I've got about 6. Thanks again for the offer. Be safe.

[@pev_]

You must have a BIG warehouse to store all the tools that you have got for these videos over many years :) Anyhow, these test videos or yours are very well thought out and a joy to watch, thank you!

[@ProjectFarm]

Actually what I don't save for future episodes I donate in my community.

[@paulsparrow5276]

​@@ProjectFarme

[@brettjohnson791]

Looking at that Makita corded saw; it looks like R&D (and design updates) on it ended 20 year ago. The cordless model looks contemporary. I wonder if the corded saw would have done better if some of the new tech developed for the cordless saw had been applied to it too.

[@tachometer74]

It seems the cordless ones, generally speaking, had more modern designs + bells & whistles.

[@BigMeechie304]

Good point, cordless had brushless motor, corded had brushed... That is a big difference. Not sure if they make corded brushless saws.

[@yung_sirloin]

yeah most of the corded ones were just straight up missing features the cordless ones had.

[@ProjectFarm]

Thanks for he feedback.

[@chris746568462]

There are some AC tools that have brushless motors. But any tool manufacturer is going to R&D the shit out of cordless purely for the fact that the customer can come back and buy more tools that use the same battery.

[@MrSteak]

Always finding tests I didn't know I NEEDED to see!

[@ProjectFarm]

Thanks for watching!

[@MrSteak]

@@ProjectFarm Had another video idea... Shoe or Boot insoles. Watching "FP Insoles" and various other gel, foam, leather, and custom insoles being reviewed. But nobody comes close to your rigorous tests.

[@frankievassallo552]

corded power tools typically have higher torque than cordless ones. While that may not matter for some projects, it can make a difference when you get into cutting applications. Unlimited operation: Electric power tools can run forever, so long as there's a working outlet or generator.

[@ProjectFarm]

Thanks for the feedback.

[@joshuamaserow]

Not forever. Lots of brushed power tools get very hot (and many people say theirs have fried) if you run them too long and they get too hot. Corded tools are almost always brushed motors which are inefficient and produce a lot of heat. I've experienced it with all sorts of tools, rotary tools (dremel (gets extremely hot), ryobi) vacuum cleaner, bent sander, hammer drill, jig saw etc etc. Literally every type of corded tool will suffer from this due to the technology unless the manufacturer really optimizes the internal cooling fan and thermal design to expel heat as fast as its generated. But that seems hard for manufacturers to do. Either that or they only engineer them for intermittent duty. Either way you simply can't say that corded tools can run forever. Its a dramatic over generalization and false for probably most corded tools that exist. Its such a problem that I actually own more than one of a certain type of corded tool (and try different brands) so that when one is too hot and needs a break to cool down, I can use the other one. Aiming a powerful fan at the tool definitely helps. Either way heat is the huge corded tool problem that you have overlooked. Not only power. Brushless cordless tools (assuming same quality) will likely outlast corded tools. You're really worried about batteries... But only some brands charge ripoff prices for batteries. There are lots of brands to choose from. There are also battery adapters to run tools with batteries from other brands. (Which can give all the safety, battery longevity and convenience with the right combinations vs battery brand x with tool brand x) Ryobi has also upgraded their battery tech, so now they offer lithium batteries for their tools that were designed to run on NiCd. And when new future battery tech emerges, it will be possible to run it on some present day tools. Also there are corded power adapters for cordless tools. So you can have the best in thermal/energy efficiency, comfort (vibration heat and noise), torque, run time, portability. I see comments like yours as closed minded just wanting to justify your fears of trying new tech. I've got lots of corded and cordless power tools. I like the cordless ones more. Even the brushed variety. Ultimately its not so simple to say the one is better than the other. Everyone has different needs and budget and goals etc. But if one were forced to generalize, then absolutely cordless is better than corded. Blade stopping time just popped into my head. All the latest and greatest engineering goes into cordless. Why try to swim against the current? You're only tiring yourself out for nothing. Open your mind and you will suffer less.

[@frankievassallo552]

@@joshuamaserow My friend you misunderstood the The Project Farm or my comment. The Topic is Corded power tools. Not brush or brushless power tools. Thanks for your feedback.

[@wooddoug1]

@@joshuamaserow I disagree. I operated Makita skill saws on high production framing jobs for many years, sometimes cutting rafters virtually nonstop for hours. Not once have I ever had a circular saw shut down or smoke

[@IMPACT-NATION]

Best Tool Tester in the WORLD!!! Amazing how far technology has advanced into the power tool industry. I love the comparisons and all the valuable information your content provides. You take informed buying decisions to a whole different level Todd. Thank you for your heartfelt response. It was tough to read through the whole thing without taking a moment. It meant a lot. Thank you Todd Brandon S

[@ProjectFarm]

Thanks and you are welcome!

[@johnswartley7104]

Love the content. If I were to add my own two cents as a full time carpenter it would be that at this point any power differences between corded and cordless are irrelevant for me. Dewalt flexvolt and other brands bigger batteries are completely sufficient for almost all purposes. The amount of time saved by having all cordless is what the real benefit for me is. Yeah batteries are expensive but they save time and hassle, and time is money. Not to mention cords can be pretty expensive too. I’m not sure how this could be realistically measured but I’d love to see the time comparison between corded and cordless setup.

[@Apollyon67]

Not to mention the safety aspect of not having extension cords laying across the workspace.

[@bolasblancas420]

You’re right… time is money.

[@danharold3087]

I totally agree for the guy that uses his tools on the job. But for the occasional user the story is different. Why pay 2 or 3x for a tool that is going to be dead in 10 years.

[@Tool_Addicted_Carpenter]

I guess you could just figure some averages into the equation. Cordless tools going directly into a toolbox are done right then and there. Unwrapping cords in the morning can take 15+ minutes. Later, wrapping up 3-5 50'-100' cords and then wrapping up the cords on the tools themselves can easily turn into 20 minutes. Cordless is a no brainer in a lot of ways. Also, with options like the Makita or metabo rear handle coming in ~$200, you're not spending much more than the $180 it costs for a Mag77 if you already have those battery platforms. They're also much lighter before you even include the cord snagging. Table saws kind of demand a cord, but even then, I do most of my trim work with the cordless DeWalt these days. I also run the cordless 8 1/2" Bosch miter saw and it performs better than my corded in terms of accuracy. Cordless finish guns are solid but cordless framers haven't quite taken over considering their weight. Just rambling.

[@tomrogers9467]

@@danharold3087 Buy Ridgid. They have a lifetime warranty on the tool and batteries. I’m on my third set of batteries in 15 years, all replaced free! Great company to deal with!

[@fmike15]

I lived in Europe where the normal household current is 220v 50hz. I remember the power tools there seemed a lot better than 120v tools. That would be an interesting comparison.

[@ProjectFarm]

Thanks for the video idea.

[@yogibarista2818]

Yes - 110-120v is very much a North-American and Japan thing, and elsewhere 220-240v is the most common supply voltage.

[@JustinShaedo]

Ditto for Australia's 240v

[@LC-hd5dc]

slight misconception, there are 230v variants even in the us and you can have compliant 230v receptacles in your home too

[@DiscoFang]

Here in New Zealand my larger hand-held Makita corded circular saw is 2300watts running on 240volts.

[@Nevir202]

Imagine being this guy's neighbor: "Hey, can I borrow a drill?" "Sure, you can keep it too, I own 20+ of them and have several more on the way for my next test. Take an angle grinder and circular saw while you're at it I don't have the space!" LOL

[@Colorado_Native]

"Yes, you can. Would you like a corded drill or a battery-powered one? Do you want a Makita, a DeWalt, a Ryobi, a Porter-Cable, a Hitachi, a Kobalt, a Milwaukee, a Craftsman, a Bosch, a Black + Decker, or a Makita? Did you want a 6 volt, a 7.2 volt, a 9.6 volt, a 12 volt, a 14.4 volt or an 18 volt? Do you want one made in China, Viet Nam, Germany, the United States .... Hey, come back, I said you could borrow a drill."

[@ProjectFarm]

Lol!

[@Nevir202]

@@Colorado_Native LMAO!

[@thomasstrickland0]

Personally I like having a corded backup. Especially when drilling. The battery just can’t keep up with what I’m trying to do.

[@ProjectFarm]

Thanks for the feedback.

[@matthewmiller6068]

I agree - it really depends what you need to do. Cordless drill will do small holes and screws all day long but put a hole saw or big spade bit and you chew thru batteries like they're going out of style. Also if you don't want to spend a small fortune, a corded $70 saw will outperform a cordless $70 brushed motor battery saw with ease.

[@thomasstrickland0]

@@matthewmiller6068 I agree. A hole saw is the drills worse nightmare. I use a 3 inch saw a lot it might get through one time, but you’ve gotta get it done seven more times well. It ain’t gonna happen.

[@Subsonic-cd2en]

It would be even more interesting to see a test like this if tool manufacturers put the same time and money into engineering corded tools as they do cordless. I feel like corded tool design has remained unchanged for the last 20 years.

[@erlendse]

Totally, doing a mains capable inverter would make them bigger (isolation required), while dealing with less voltage from a battery is easier(isolation optional). Especially if you want to include complex stuff (microcontroller, LEDs e.t.c.).

[@ShotgunRocket]

It's probably pointless in the eyes of the manufacturer. There's more demand for cordless tools, even when they perform worse.

[@ducewags]

@Subsonic1050 Corded tools have remained the same for well over 20 years. Unless you think corded tools were a new thing back in 2000?

[@kentonmar6639]

I've been in the metalwork trade for over 40 years. Have corded tools that are over 25 to 30 years old. Not much has changed for them. I have switched almost completely to cordless. Because many job sites have no or limited access to power. Not having to run a mile of extension cord sure save time. Cordless tool will never be as durable but way more portable.

[@A6Legit]

What kind of engineering do you mean? Seems like the corded stuff is already dialed in and built to use the power available. I would love to see more engineering on the functionality/convenience side. I feel like the only engineering going on with cordless tools is the battery packs, and the performance improvements are simply due to higher output batteries. Eventually they may have to beef up their internals, but I get the feeling the last few generations of a lot of tools were probably the same components, just marketed with higher output batteries. Idk if I would say its pointless to tool companies, but im sure they would rather be raking in profits than spending money on R&D. Its kind of a shame though because it seems like many improvements could be made, and it wouldn't take a rocket scientist.

[@Derrmo]

I love these videos and the test gear is fantastic, great job. With over 35 years experience using tools, I can honestly say that for a DIY home user the corded power tools are much better value. I have used all types over the years and I now buy corded tools because of simple economics - A battery for a power tool is almost as expensive as a whole new tool including battery. The only battery powered tools I now have are a 18v drill and a 20v torque wrench, all other power tools I have now are corded.

[@ProjectFarm]

Thanks for sharing.

[@Uryendel]

If you work on your home next to electical cable, you can't use safely corded tool. And for battery, you can have one battery for multiple tools, the only issue is if the battery system become obsolete (would be great to get some legislation to standardize battery connector)

[@ryanfluck4441]

The more you engage, comment/share/like the better a channel does. I've watched for 3+ years, I check this channel before I buy.

[@ProjectFarm]

Thanks!

[@chevalierdeloccident5949]

I was afraid manufacturers would purposely under develop corded tools to sell us more batteries.

[@SquintyGears]

I mean the tests do show that. Not dramatically in cutting performance in most of these examples but all the quality of life and niceties are stripped out. Noise, vibration, breaks... But I'm not sure if I would blame them for trying to hit a price point. It's very likely that very very few people would buy a 250$ corded tool over a 300$ cordless one.

[@danmar007]

They probably would if they owned battery companies.

[@MrPicklesAndTea]

@@SquintyGears I prefer corded tools for some applications, but things like, drills and leaf blowers are better off cordless. But I hate batteries with a passion so the fact that I prefer cordless in some cases is impressive.

[@SquintyGears]

@@MrPicklesAndTea yeah i never got the point of having a cordless circular saw for myself. contractors would probably benefit from it on a job site. but if you only use it at home or in your workshop space, how would you ever benefit from having to charge batteries.

[@leanderhobb]

Awesome

[@zwing300]

After 28+ years as a Tradesman, the only cordless tools I buy now are 12v pocket Drills, and impacts. The corded tools just last longer, and are much cheaper.

[@kw6713a]

Not to mention you can mix and match brands however works to save a few bucks or maximize quality. I suspect most who buy cordless hardly ever work more than a few feet from a working outlet.

[@bertgrau3934]

I would like to see a battery powered welder, does anyone build one of those?

[@ProjectFarm]

Thanks for sharing.

[@nfocus2c]

MAN!!!....i think you hit it out the ball park with this one sir.....this was OUTSTANDING as a test subject......

[@ProjectFarm]

Thanks!

[@randy521]

Thank you PF for doing the things guys always wonder about

[@ProjectFarm]

You are welcome!

[@CharlieRunnalls]

I love your no s#!+ straight to the point videos.. every second is always worth watching! Always fair tests and well made test rigs.. the effort you put in is much appreciated! They must take a long time to make and edit. Don't change a thing bud! 😁 Thank you 👌

[@ProjectFarm]

You are welcome!

[@thomasvlaskampiii6850]

Once again, an impressive amount of top quality testing! Ya know, I wish quality control labs would do testing at this level. Instead of just "squeeze trigger, thing go brr, it pass"

[@ProjectFarm]

Thanks!

[@luemn7691]

The price aligns with the tools. Put the money and effort to refine the corded and it will outpace the cordless with omly the exception that it has a cord to power it. Still prefer the cordless unless you need to mix tile mud. Great video!!

[@ProjectFarm]

Thanks!

[@Lee-lb9qh]

Lol they make a cordless mud mixer

[@luemn7691]

@@Lee-lb9qh there is but buying one to use it about 4 times is quite the peeve.

[@brianedwards780]

Straight to the point, it’s obvious this guy knows what he’s doing. Thank you sir

[@ProjectFarm]

You are welcome!

[@3UZFE]

Cordless is for convenience with some performance loss, corded is clearly better and will work all day, and the tools likely have a decades long life span. Replacement batteries costs are the issue with cordless, Ive got a Bosch cordless grinder and the two batteries are already getting week after 3 years of occasional DIY use.

[@thedyingtitan1247]

Not always on very heavy tools in NA batteries can actually out perform wall plugs because they can deliver more power admittedly for a very short period of time. The best example of this is 3/4” and 1” impacts The batteries can on the large tools provide more power than a normal 15 amp wall socket can. That said you need to go yo the larger 40/60 volt tools to get this performance benefits

[@gorkyd7912]

Life span can be great for corded tools but there are quite a few that will definitely fail if you use them regularly. It's the same for battery tools but if you're a contractor or someone who uses tools every week chances are the thing will wear out within 5-10 years no matter what it is.

[@ProjectFarm]

Thanks for the feedback.

[@samcooke2742]

Tool longevity is an important factor for me. I don't wear out most of my tools - I still have the 6365 Milwaukee circ saw I bought new in 1976. It still works fine when you plug it in. No battery powered tool will last even ten years. I've had to toss my old 14.4v DeWalts - it was kinda sad. I don't think they'll be selling M18 batteries in 2050.

[@kstofkos]

Fact! I completely agree with you. I prefer the corded tools. I got sick of replacing batteries that cost as much or more than the tool itself.

[@1pcfred]

@@kstofkos corded is good if you have power. But battery power is convenient and portable.

[@martinsvensson6884]

Its good to have a corded in store. That will always work. But for everyday use I get one with a battery. Only for convenience.

[@mr.g937]

No doubt you're paying more and more frequently too. But it's a cost/benefit question - it worth spending 4-5x more when you factor in longevity for the convenience of being able to take your tools anywhere? I and a lot of people would say yes.

[@tomrogers9467]

@@kstofkos Buy Ridgid. Lifetime warranty on batteries, no problem getting a replacement shipped to you. I’m on my third set in 15 years, all free!

[@elky4x4]

Your tests are by far the best and the rigs are pretty genius... just one critique of this video: the hammer drill. It's not a driver, it's a hammer drill. May be better to test hammer drilling though a concrete block or brick rather than lag driving torque

[@CapnCrunchESO]

I’m going to be honest, I’ll probably never buy any of the tools I see on your channel but I love watching to see what cool testing rigs you come up with!

[@ProjectFarm]

Thanks for watching!

[@travisabt6805]

Corded tools absolutely have their place! High velocity/high power consumption tools like routers and table/miter saws are much better to have corded since they eat batteries. I was always taught to buy corded tools used and cordless new! Great video!

[@ProjectFarm]

Thank you!

[@MAGAMAN]

I only use cordless hand tools. Anything stationary is a waste of batteries and lacks power. If I am working somewhere that doesn't have power, I'll bring a generator to plug my corded tools into. You are going to need somewhere to charge your batteries anyway, if you are doing any real work. My Dewalt cordless circular saw can only cut through a handful of boards before the battery dies.

[@kssarh]

I've always heard that one big advantage of cordless tools, is that at the high end, they are not limited by 1500W max draw. Curious if there are cordless tools out there at the contractor level that actually do take advantage of the much higher power ceiling of lithium batteries.

[@ProjectFarm]

Thanks for the suggestion.

[@ortzinator]

Also AC motors are less efficient. So they may pull 1500W out of the wall but not all of that power is coming out of the other end

[@hearohh]

PF is one of the few channels I get notifications for! Great work on your videos! I think a video on loppers would be cool

[@ProjectFarm]

Thank you very much! This means a lot to me!!

[@thedude7726]

@@ProjectFarm same here. I always share your videos with my guys at the union

[@scottbabineaux2344]

im addicted to your videos man you do a great job

[@ProjectFarm]

Thanks so much!

[@Xamy-]

If it ever ends up being an option I would be interested in seeing some of the other major brands to see if the trend holds true across brands

[@0Sirk0]

Next march madness

[@ProjectFarm]

Thanks for the suggestion.

[@wiredforstereo]

These recip saw tests suffer from not using them like the user does. I don't know about you, but I rock the recip saw up and down for better chip clearing. Same with the oscillating tools.

[@ProjectFarm]

Thank you for the feedback!

[@cup_and_cone]

I think the lesson to learn here is that tool manufacturers are putting all their R&D and best technology into cordless, while corded tools haven't changed much and don't offer much in terms of features.

[@ProjectFarm]

Thanks for the feedback.

[@franklong6269]

Great video! A lot will depend on which corded tool that you compare with the cordless tools. I worked my way through college as a framing carpenter and that job puts power tools to the limit. We used Skill 77 worm drive saws, Milwaukee sawzalls and Makita 3/4" hammer drills. The Skill 77 is a beast, but I would burn out a motor every couple of years. Today's cordless tools are very good, but they will not perform under jobsite conditions for framing houses nearly as well as corded tools. The problem is not their power, the problem is their durability. As you use a cordless tool under max load conditions, the batteries drain very quickly. Typically, the motors on the corded tools are faster and more powerful. This aids the durability of these tools during 110 degree days when my saw handle got so hot, I could barely stand to pick it up because it burned my hand. Cordless tools just cannot stand up to this type of abusive use. Their motors burn out more quickly and their batteries fail in very hot or very cold conditions. Construction personnel do use cordless tools on the job, but usually for light work and convenience. Until new designs for more durable and powerful batteries enter the industry, corded tools will rule construction jobsites. For homeowners, cordless tools are fine and more convenient. I have a Fein multi-tool that is corded and it is far more powerful than any cordless multitool I have ever used. Also, it doesn't lose power like cordless multitools. The same is true for corded Skill 77 worm drive saws. There is no cordless replacement for them. Milwaukee just came out with a cordless worm drive saw, but I can almost guarantee that it will not keep up with a corded Skill 77 saw over an eight hour day, weeks and months on end. Even as bulletproof as the Skill 77 is, we could go through several saws a year. As battery technology improves the gap is closing between corded and cordless tools, but there is still a very wide gap in performance and durability. That will change over time and as you state in your video, for homeowner use, cordless tool are sufficient.

[@ProjectFarm]

Thanks! Thanks for sharing.

[@zach.ny29]

I have a suggestion: for the summer, compare different desk, tower, and box fans to see which is the most effective at cooling you down and moving air while not being super loud, power hungry, or expensive!

[@ProjectFarm]

Thanks for the suggestion.

[@patty109109]

Pretty good idea 👍

[@conman1395]

Mattias already did this experiment

[@Shorty_Lickens]

I'm not sure about hand tools but I do know one thing: Corded vacuum cleaners are MUCH more powerful than battery.

[@ProjectFarm]

Thank you for the feedback!

[@jwestrik9308]

Yeah, the cordless ones suck...

[@imnottellinudontwannaknow3188]

This is an awesome comparison! Thank you for making these videos!

[@ProjectFarm]

My pleasure!

[@ljwho9921]

Having a blade break in a saw is great, I sometimes like to tie off my guard with some wire when it’s getting in the way… but then every time you finish a cut you gotta wait for the blade to stop before setting it down, so I’ve been loving the blade break feature as well as the rafter hooks that cordless saws are coming equipped with

[@ProjectFarm]

Thanks for the feedback.

[@MichaelLangell]

First off great video and I love how much effort you put into your test rigs to make the comparisons fair. Only thing I didn’t get about the video was the dewalt drill comparison. You used one of the weakest corded drills they make. There are several slightly larger ones that match the cordless one you used a lot better, bigger motor and different rpm rating.

[@ryawhite1466]

Loving this channel! Keep it up man!

[@ProjectFarm]

Thank you very much!

[@Leron...]

Thanks for another great video Todd! If I could make one request, at a few points it was hard to distinguish when the audio said "corded" vs "cordless" since the sound so similar. Maybe next time you do something like this, do what you did in the graphs and say "corded" vs "battery powered" to add more distinction?

[@MAsWorld1]

Great Question! Cordless tools have come so far, it used to be their only advantage was No Cord!! Which is great for sure! Drill test wasn’t fair. Sawzalls: I have both tools, corded is stronger/faster but cordless is usually the one we all grab! Circular saws : corded are always more powerful. And we also use cordless chop saws which are super convenient but again much less powerful than corded. One last point: battery tools are throw-away items! once batteries are gone / obsolete they’re useless ( I’ve thrown away tons of them) if you wear them out first, no big deal, but if you’re a homeowner and don’t use your power tools that much, corded tools will be forever purchases!

[@ProjectFarm]

Thanks for the feedback

[@TheFlick175]

A cord can be helpful because it also serves as a rope for lowering the tool and such, as stated by essential craftsman

[@mysterious_codm6812]

Use smaller size rope

[@dariog36th]

Can you test out over the air TV antennas? Would like to see which one gets more channels, better reception etc.

[@doctormdds]

Antenna Man does a good job on that.

[@thecloneguyz]

Most antennas are pointless if you're in a valley or at the bottom of the hill

[@ProjectFarm]

Thank you for the video idea!

[@erlendse]

Keep in mind, there are inline amplifiers to have close to the antenna, filters e.t.c. you can use to affect final performance. A long cable can cost you many channels if you don't use a amplifier at the antenna! For shorter cabling the amplifiers are less interesting. Also all cable isn't equal, there are instruments for testing that if you are interested.

[@kstofkos]

That would be awesome, I bought an antenna and it was a waste of 20 bucks. Lol. I would love to see which one offers the best reception. I am still open to buying another and am willing to pay up to $250.00 for one that actually works.

[@violinmiata]

Battery technology keeps getting better. It’s going to be interesting to see what comes after the lithium batteries. I do wish tool companies would make retro batteries for older tools. I have a Dewalt 9.6 that I’ve had since high school, the replacement batteries are remanufactured and are awful, it is a really nice and delicate tool, shame it’s useless now

[@ProjectFarm]

Thanks for sharing.

[@borttorbbq2556]

I mean a lot of companies will probably make it the very least doctors there is a huge market for adapters

[@CarlosN47]

They make battery adapters that sell on amazon

[@corey6393]

Your closing statement pretty much covers it. Different tools for different needs. Well done on this one. Thanks for doing what you do.

[@ProjectFarm]

Thanks and you are welcome!