Best Insulated Water Bottle? Yeti vs Hydro Flask vs 12 Other Brands! Let's find out!

BRANDS TESTED: Contigo, Hydroflask Standard Mouth and Sport, Yeti, Brita, Aquatix, Bubba Flo, Under Armour, Hydrology, Coleman, Klean Kantine, ThermoFlask, Stanley Classic and East Rim. Thermos bottles tested for cold and hot beverage performance and durability by dropping them 36 inches. Finally, some of the bottles were cut open to look at the internal construction. Several others are durability tested using the Farmabago.
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ To subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Contigo: amzn.to/3n2A8SI
HydroFlask Standard Mouth: amzn.to/3rQKuIM
HydroFlask Sport: amzn.to/2X2pY9V
Brita: amzn.to/3b3dBmn
Aquatix: amzn.to/3pMpwJc
Bubba Flo: amzn.to/3rQsHRY
Under Armour: amzn.to/353A27e
Yeti Rambler: amzn.to/3aYQhpT
Hydrology: amzn.to/3pNjzvV
Coleman: amzn.to/3pLGPui
Klean Kanteen: amzn.to/2Mi5N5N
ThermoFlask: amzn.to/3pNauD1
Stanley Classic: amzn.to/3pHec19
East Rim: amzn.to/2JK2mEg
Test Equipment Used in this Video:
Digital Thermometer: amzn.to/2MoKFuF
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/2SvwQdS
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

[@ProjectFarm]

Here's the list of products reviewed. More details in the video description. Thank you! Contigo: amzn.to/3n2A8SI HydroFlask Standard Mouth: amzn.to/3rQKuIM HydroFlask Sport: amzn.to/2X2pY9V Brita: amzn.to/3b3dBmn Aquatix: amzn.to/3pMpwJc Bubba Flo: amzn.to/3rQsHRY Under Armour: amzn.to/353A27e Yeti Rambler: amzn.to/3aYQhpT Hydrology: amzn.to/3pNjzvV Coleman: amzn.to/3pLGPui Klean Kanteen: amzn.to/2Mi5N5N ThermoFlask: amzn.to/3pNauD1 Stanley Classic: amzn.to/3pHec19 East Rim: amzn.to/2JK2mEg

[@SChecoP11]

“Stanley bottles have survived category 5 hurricanes” I expected Project Farm to say “we’re going to test that”.

[@ColdRiverAutowire]

Demolition Ranch did

[@Zark-Muckerberg]

@@ColdRiverAutowire No, he did not.

[@pjfsr7024]

I expected some target shooting myself.

[@bilbobaggins4710]

@@Zark-Muckerberg yes....he did

[@petermoto409]

@@bilbobaggins4710 Not the hurricane. He tested the speeding bullet.

[@7eroBubble]

The "Farmerbago" is such a refined and delicate scientific instrument, I just love watching it at work!

[@pmarquisYT]

I'm sure it is calibrated externally once a year.

[@nmatthew7469]

@@pmarquisYT we're going to test that.

[@thedude7726]

@@nmatthew7469 lol

[@KlodFather]

Just don't park it down town anywhere and announce on a PA to evacuate because you are conducting a test LOL Especially near the phone company or in the bar district :D

[@themagitechie9955]

@@KlodFather Too Soon. Dude, Too Soon.

[@fen4554]

I love how this channel tests more rigorously and thoroughly than any consumer report type show. And I feel confident that nothing is biasing results.

[@ProjectFarm]

Thanks!

[@magicstew45]

Not to mention that he obviously takes the time to read through comments even with 1.8mil subscribers.

[@ohsweetmystery]

Why no Zojirushi?

[@Newb_Manster]

This channel is a big W. Gives u the truth, no biases. Highly suggest notifications on cuz it’s goated channel

[@Newb_Manster]

Subbed like 2 years ago (I think)… 0 regrets

[@stanblackburn700]

Whenever I have a purchase in mind, I think "Project Farm?" Love your work, Todd. Thanks.

[@ProjectFarm]

Thanks and you are welcome!

[@Can_Head]

Did the same thing here, and his videos will be forever relevant as long as the products are sold

[@dm0057]

Same here always check PF before a purchase.

[@direktorsvemira96]

Not a single second of waste, talk starts exactly at 0:00 and it ends exactly at the end! Straight to the point! Great job! All the best from Croatia!

[@captainamericaamerica8090]

It's all made to last longer. So we are force fed, ads, that YOU TUBE PAYS HIM BIG MONEY FOR💰💰💰💰💰

[@gus473]

@@captainamericaamerica8090 ¯\_(ツ)_/¯ Gotta pay the bills, right?

[@mediumugly4322]

@@captainamericaamerica8090 he wouldn’t be able to bring us the great content he does without revenue to afford all the different test products

[@trahar6257]

Nailed it. I use the skip forward on nearly every KZbin video I watch. Never touched it once here but I did use the reverse a few times

[@captainamericaamerica8090]

@@mediumugly4322 He didn't start like this. They all get GREEDY. THEY CATCH ON QUICK. THE MONEY THEY TAKE IN IS MASSIVE💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰💰THIS IS WHY HE NOW MILKS THE COW, FOR ALL SHE'S WORTH. AND AT OUR EXPENSE. FORCE FED ADS NON STOP😧😧😧😧

[@stankolodin5586]

This man got us covered, anything and everything.

[@stevenplaskett7728]

Best KZbin reviews on the web ever

[@the_uggh]

Not the hero we needed, the hero we deserved

[@ProjectFarm]

Thanks!

[@coffeetimeisanytime7759]

@@bikerrider4845 i doubt they'd survive the drop test...

[@Kelocyde]

@@zemouregalhd3331 Fucking rofl.

[@cbjonsey5785]

At this point he’s just making up reasons to bring out the farmabago and it’s amazing

[@ProjectFarm]

Thanks!

[@odysseyrider1]

Right lol. Like there’s any point in running them over 😂😂

[@roberthogue6797]

If one has a farmabago, one must use a farmabago. It’s simply a fact of life.

[@orangesv356]

I like seeing thing get destroyed

[@jwhoward182]

The manufacturers are unable to claim “farmabago tough”

[@scootcha]

Todd, I find it amazing that you read and respond to comments on ALL your videos, even old ones like this. Thank you for your dedication to helping the common man. Honesty can be hard to find these days, but people like you are a reminder there is hope.

[@ProjectFarm]

Thanks and you are welcome!

[@frijidmeatwad5253]

Project farm's wife: I just made the best batch of spaghetti ever! Project Farm: We're gonna test that.

[@ProjectFarm]

Lol, Thank you!

[@chrisman3673]

....And end up with no wife.

[@myhtcevo4g]

Lmao

[@CSNCSNCSN]

And then a string of: Best budget motel... Best cup of instant noodles... 😮

[@dandetande288]

Hahahahaha

[@mikeheath7107]

While they are expensive, the Stanley warranty is top notch. I had a vacuum insulated bottle with push button lid. At some point the lid went missing. I emailed them hoping to buy a new lid, turned out that bottle was discontinued a few years prior and they didn't stock the lids.. But two weeks later a new lid showed up in the mail, no charge, no shipping.

[@ProjectFarm]

Thanks for sharing!

[@jamesphillips9446]

We deal a lot with cryogenic materials and the Stanley vacuum flasks insulate much better than the competitors if you don't have a true Dewar on hand. Obviously this is much different than the use cases of the typical consumer, but it matches up pretty well here with the very good cold performance of the Stanley relative to the other brands

[@803dj5]

If they didn't stock the lids I wonder how they sent one? A fast run of lids?

[@MBTK11]

"Responsibly made in china" is the funniest thing i heard in 2022

[@thewolfofgod3908]

@@MBTK11 Yet here there are leading on 5G tech to the point we make up some BS storylines to slow down their reach. You are a victim of very deliberate propaganda.

[@ER.Drones]

This is one of the only legit testing channels on youtube.. he deserves the success he has. ✊🏼

[@ProjectFarm]

Thanks for watching.

[@ericulric223]

That gets my sub.

[@josephcretella240]

I watch his videos all The time. He’s hands down the best.

[@nooberNXC]

Whenever I plan on buying something, I always check to see if PF has already reviewed/compared it, then I buy that.

[@spookiepookie2713]

Dont Forget AVE does tear downs of tools with real mechanical and electronics experience. The dude can smell a bad tool from a foot ball field away.

[@gabrielsodre1897]

I simply love your work, dude. I've never seen such a rigorous tester on KZbin. You save me hundreds of dollars and many hours of research, trial and error. Thank you very much!

[@ProjectFarm]

You are welcome!

[@kylecanavan7967]

Sorry for my language, but bro... you're an absolute fucken champ dude. Your videos are a valuable resource for consumers, and unlike other consumer reports-esque sources, we know you're totally unbiased. Your scientific process is pristine, your test are always super relevant and well designed. Your editing is on point, and you have such a nice cadence and voice for this type of stuff. Even down to the iconic super nice pen you use during close-ups. Top 10 KZbinr bar none! Legit just wanna give you a firm handshake

[@ProjectFarm]

Wow, thanks!

[@PlayinWithMahWii]

Agreed!

[@lewiscoleman6747]

Agreed

[@lewiscoleman6747]

Anyone who takes the time to do what you do sir.and do it well deserves his props.

[@almightymigoo]

I like how you expose the company’s claims . keep it up man

[@electricalen]

"I don't think I've ever seen a Hydroflask that didn't have a dent in it." As an owner of 2 Hydroflasks (both dented), that one hurts.

[@jennak11]

I have an Ecovessel that's dented, allbeit my laptop fell onto the side of it and from about 5ish feet up too

[@MrSGL21]

do they retain their vacuum and still insulate despite the dent?

[@jd5997]

@@MrSGL21 they should as long as there is not puncture. If the walls touch because of the dent, it will definitely be worse insulating though. But generally dents won’t really change the performance.

[@kenabi]

i have 4 with no dents, used regularly.

[@Nardo_stpierre]

I just looked at mine and saw I had one too😂

[@sonofcarr]

Coleman is like the “Kirkland Signature” of outdoor gear. It’s not flashy or “hip”, but it provides consistent quality at a good value.

[@ProjectFarm]

Thanks for the feedback.

[@OmegaGamingNetwork]

Except their tents...those are just straight up garbage.

[@NGMonocrom]

@@OmegaGamingNetwork Sadly, forced to agree.

[@dereklacy]

@@OmegaGamingNetwork Maybe their tents aren't good anymore, but my wife bought a coleman tent around 15 years ago (maybe more?) and we finally had to retire it last year.

[@OmegaGamingNetwork]

@@dereklacy Yea, sorry should have mentioned I am referring to modern stuff. The only other thing I don't buy coleman these days are the propane lanterns but that isn't due to quality. I simply prefer the old style simplicity and don't think the new ones justify being twice the price of everything else. Beyond that, I have a bunch of coleman gear.

[@mouseman225]

Love your work. One important call-out in this test is that the volume of liquid should be the same for a fair test. Larger volumes of water take more energy to heat or cool, so the larger volume bottles will lose their heat or cold over a longer period than smaller bottles even if they are designed the same.

[@dubmob151]

it seems a more controlled test might be to fill the containers with just ice at the same temperature, e.g. -10 degrees F. then after the test time duration, see how much water is able to pour out from the container. That would equalize differences due to volume of the container, as the larger containers hold more ice, which then allow greater chilling to compensate for the larger volume. The greater the amount of water, the lower the performance of the container, so containers that do well will only show a small trickle of measurable water.

[@garcex1382]

volume to surface ratio !! is the only important

[@Amy_A.]

That's true if you're specifically comparing the thermal transfer of each thermos, but I think this was still a fair test for real-world usage. It's less empirical, but I think it's just as (if not more) useful to an average consumer.

[@SeanLain]

There is no downside to having more coffee.

[@cuzuvmcvoy]

I WAS THINKINH OF THE SAME THING! GOOD CATCH ON THAT ONE!❤

[@ajkrystal79]

I’m not even shopping around for a water bottle…..watched the whole episode….subscribed.

[@ProjectFarm]

Thanks for watching and subscribing!

[@alitlweird]

This channel was made for binge watchers! 💪🤩🥳

[@flyonbyya]

I’ve made my choice on a number of products based on this channel Great service !

[@ProjectFarm]

Thank you very much!

[@Docrocks437]

Same here

[@mathew00]

Same. Thank you!

[@tconfer43]

Love the little chuckle every time the yeti didn’t live up to the hype.

[@pablopicaro7649]

overpriced CCP made products. Profits for mansions in Austin, TX

[@poeticsilence047]

I was thinking the same thing. Just paying for the name just like most things.

[@9bq537]

Its not even the orginal yeti. Its the rambler. The original is way better

[@gus473]

@@pablopicaro7649 People keep falling for it, though! ಠಿ_ಠ

[@tjnelson111]

I'm sure the cult of Yeti will be in to tell us how PF screwed up the testing. Overpriced and overhyped, but how else can you put that sticker on your car so people know you like to pay more for mediocre equipment.

[@donkus6710]

Instant sub. How have I not heard of this guy? If his other videos are as thorough as this, he's an insanely good source of info in general

[@ProjectFarm]

Thanks for watching and subscribing!

[@ryburks2758]

I like how the "speeding bullet" picture showed a bullet flying with the casing and all.

[@Superbdrivemate]

Demolition Ranch tested this. It didn't stop a bullet lol

[@kushkiller7108]

@@Superbdrivemate that's how you know they mean business

[@ProjectFarm]

Thanks for the feedback.

[@jmac2o229]

im betting by speeding bullet they mean they threw one at it lol

[@Willard_guy]

Here at Aperture Science, we fire the whole bullet that's 65% more bullet per bullet.

[@BiggMo]

Your testing just keeps getting “cooler”, just can’t “contain” my appreciation for your approach to the “hot” topic.

[@ProjectFarm]

Thank you!

[@YOGURT1]

Please no more.....pleas

[@Ranveer_Singh_sangha03]

You sir, deserve my respect

[@ProjectFarm]

Thanks!

[@orionmettling7417]

Well... did he get it. Did he get your respect?

[@mikewallace8087]

@@mercdragons , I don't get it !!! ?

[@bigswiglawns]

Earned your respect?

[@Trapperboy190]

Respect ma authoritah!

[@Starburstguy]

What an awesome extensive testing on these thermos. Personally I have owned and used Hydrolask for over a decade and the only reason I replaced them is because I drop them. Eventually that cracks the insulation effect and they no longer hold hot or cold anymore, they become just another bottle. It was awesome to see the inner layers when you cut them up. This is great because maybe I’ll consider a different brand based on durability on my next bottle purchase. You’re awesome, love this channel. Keep doing what you’re doing. Thanks for all of your extensive and thorough testing/research.

[@ProjectFarm]

Thanks, will do! Thanks for sharing.

[@o0Avalon0o]

I've shown so many friends their "sippy cup" style bottles often have black mold in the seals because they can hide moisture. Clean well, clean carefully.

[@xenonram]

Yeah, it's disgusting. I take the o ring/ gasket out every time I clean it.

[@yorkbleyer9803]

Look at the new Thermoflask lids, now with a small tab on the clear outing or sealer ring so it can be removed and cleaned or replaced with ease. Still not made in the USA.

[@riakata]

Its why machine washable bottles should be the way to go most people are too lazy to clean the gaskets throughly. (Bad gasket design can also trap water behind the seal even from cleaning so you have to clean and dry which is very annoying)

[@jenniparker1]

I have a couple from Sam's Club, not sure of the brand, but they are impossible to clean under the gasket. You can pull it out, but there is a seam in the plastic under the seal, and it builds up in there. It's gross, and defeats the purpose of having reusable bottles.

[@gregorydiguido5078]

This is exactly why I use glass cups if at all possible. Screw on caps and valves are hard to clean properly. When I worked on designing sanitary food processing equipment, a lot of effort was put into making wetted areas smooth (no entrapment area) and polished. Companies could do a lot better on this if they followed 3A standards when designing their water bottles and thermoses.

[@pacheckers2415]

“I don’t think I’ve ever seen a hydro flask without a dent in it” facts

[@LSnium]

Bing bonG

[@turbotension]

Dented mine right under the bell at the top from a small drop.

[@rnemovr59]

Dropped mine before I ever took a drink from it.

[@ProjectFarm]

Thanks for sharing.

[@aureliusva]

Spray the outside with rattle can bed liner.

[@TheVexCortex]

Matt at DemoRanch tested the Stanley's bullet resistance claim. "Speeding bullet" must mean someone took a round, wound up, and gave it their best fastball pitch, because it sure doesn't stand up to getting shot at.

[@yzhang8629]

Link to the DemolitionRanch video kzbin.info/www/bejne/Z5i8opeahJiBmNU

[@randomfreedomlovingguy1536]

We decided the test wasnt fair, as a full thermos would stop a .22, and his were empty.

[@southaussiegarbo2054]

@@randomfreedomlovingguy1536 you sure it would?

[@randomfreedomlovingguy1536]

@@southaussiegarbo2054 A .22lr out of a handgun vs 2 layers of sheet metal, water, 2 more layers. I would think it would.

[@southaussiegarbo2054]

@@randomfreedomlovingguy1536 going off the damage done empty id say full will reduce it but they will still put a hole in it.

[@AdamWinslow123]

Please do an updated version of this. I think that there have a lot of new brands that have bottles that would fit this category. I think brands like S'well, Rtic, and Ello would be good brands to test in this category. I think that Stanley has gotten a lot of attention recently and could use more testing.

[@ProjectFarm]

Thanks for the suggestion.

[@mike17032]

Zojirushi. They are the best.

[@TreborMangum]

@@ProjectFarm don't forget the LTT water bottle lol

[@txmusician13]

Unfortunately, Stanley discontinued their insulated water bottles since people keep buying their tumblers instead. Their new water bottle doesn't seem as strong so I switched to the Camelbak Chute insulated version after losing the Stanley on a golf course. Both are 32 ounces, but the Camelbak acutally fits my cupholder and seems to be a decent replacement so far.

[@maxwellerickson7066]

@@ProjectFarm Another commenter mentioned Zojirushi. I would second this. They have the best hot temperature performance with respect to volume, in my opinion.

[@DerMannII]

Expressly because of this video, I bought a Coleman 40oz bottle. It's the best water bottle I've ever owned. Unlike others that have the fold out straw thing going on, the Coleman lid is perfectly leak-proof, flows easily and is easily cleanable. The rubberized bottom with a plain steel "bumper" is also excellent. It doesn't slip or damage surfaces you place it on. If you're carrying it, it's usually the bottom edge that slams into things, so the extra protection is great. I've had it for almost a year, and it's held up like no other. Thanks for the video, sir.

[@ProjectFarm]

You are welcome! Thanks for sharing.

[@mrsaul3709]

Same here, I bought the 40oz version Coleman bottle and I am enjoying it, it is the best bottle overall and really sturdy, dropped it a couple times and it dented a little on the bottom.

[@seanskrobarczyk398]

It seems like the cost to effectiveness ratio the coleman was the winner.

[@So1othurn]

I bought two 40 oz. They are awesome.

[@goldlamp574]

I have had the 40 oz version for 5 years. I use it almost every day and it only has a few scuffs and dents. The only real wear is on the rubber button from many a finger press. I would be genuinely sad if I lost this water bottle lol. Great purcahse.

[@lesteroil2]

I had a Stanley fall off the back of my tractor and before I knew it I tilled it under. Next year I tilled it up and the coffee was still hot.

[@lawpickinglocksmith7689]

Did you store chilly sauce in it?

[@ahmedyasir8288]

@Willy Bloch, if it had chilly sauce it'd be cold, not hot 😂😂

[@ProjectFarm]

lol You have some HOT land out there!

[@tomvana4270]

Lol.

[@briantruck2284]

😆🤣

[@themav8777]

I'm compelled to express my admiration for you. Your sense of selflessness and abundance of sense, consistently over the years goes noticed by all. Thank you.

[@MichaelLawrence-s9y]

Thank you for your amazingly thorough and intelligent testing. You are my go to source when I want to get objective, credible, transparent analysis. Although you don’t test every product, no one does or possibly can. You are clearly one of the most useful and the most valuable site on the net and you work hard for it. Again, thank you!!

[@ProjectFarm]

Thanks and you are welcome!

[@jackmiller4706]

this guy deserves a grammy for how much hard work he puts in just to show us what the best products are

[@ProjectFarm]

So nice of you!

[@radish6691]

No, he deserves a testie! Or maybe two testies! 🤣

[@hugolafhugolaf]

You mean an Oscar?

[@ButOneThingIsNeedful]

You mean he sings too?

[@eurogarage2015]

Can you test cheap and expensive hydraulic car jacks. I need one and i don't know if a cheaper one would work.

[@ProjectFarm]

Great test idea! Thank you

[@jjohnston94]

I can tell you from personal experience that a really good floor jack is a joy to use compared to a cheap one, plus the good ones start out lower and go higher, so you get the best of both. Have a look at AC Hydraulics. I gave a king's ransom for mine, but it was money well spent.

[@mcc78405]

Yes this! I've been looking for one for a few months now but don't know if a 60 dollar craftsman will perform as good as a multi hundred dollar ones.

[@JM-yx1lm]

Not a single thing wrong with the daytona 3 ton low profile jack from harbor freight. You missed out on the $100 coupon but just keep your eye out.

[@95TurboSol]

I would be most interested to find out how far past the weight rating each jack would fail at!

[@TheGreatMunky]

"Won't shatter. Heh. We're gonna test that!" The only kind of review that matters.

[@ProjectFarm]

Thanks for watching.

[@DeathGamer27]

Great video and comparison. My only complaint would be the exclusion of RTIC. RTIC is the literal same thing as Yeti, in fact they got sued over that exact issue. A lead engineer for Yeti left the company because he didn't like how much they charged for their products, and thus started RTIC. Great quality items at half the cost of Yeti, which is the premise of the video. Would have loved to have seen that comparison, as the price of RTIC makes it a better deal than any of the budget options.

[@ProjectFarm]

Thank you for the video idea!

[@dietmdew845]

RTIC has the same designs, but definitely not the same manufacturing materials. RTIC is cheap shit.

[@DeathGamer27]

@@dietmdew845 I disagree, but that is simply more of a reason to test and compare it!

[@hereticnasom]

@@DeathGamer27 I would also like to see the Ozark Trail bottles included in an updated test. I have both and feel the Ozark Trail does a better job.

[@donoimdono2702]

@@hereticnasom - I would like to see other ozark trail products in a few tests as well. they're generally the same as other "store brand" camping gear products, so it would cover a fairly wide category.

[@SubjectSigma11]

I love when he says “we’re gonna test that” He takes the shatter/break/toughness claims as a personal challenge!

[@ProjectFarm]

Thanks for the feedback.

[@dasoooooooo]

y'know, Project Farm is the only youtube channel that can make testing water bottles interesting. love your content, sir. good job. may you be with us for many more years.

[@ProjectFarm]

Thank you!

[@ritawant988]

ნუ უ ამ

[@dasoooooooo]

@R I T A • Н О Т • G І R L i beg your pardon?

[@iwantsexseemyvideo890]

ჰი

[@montgomery9140]

A great deal of time and effort is evident in each of your KZbin videos. I’d like to thank you for sharing with the world!

[@ProjectFarm]

You are welcome!

[@TheThirdeYe1337]

I'm a big fan of my Zojirushi. Keeps things cold seemingly forever. Looks nice and well built as well. Great video.

[@ProjectFarm]

Thanks! Thanks for sharing.

[@rogierius]

which Zojirushi did you buy, there are quite a few different ones out there. And does yours have an inner coating or bare stainless steel?

[@TheThirdeYe1337]

@@rogierius SM-SF48-AM. I believe it is steel on the inside but I don’t remember for sure.

[@mcbain3949]

I love the legit testing and unbiased reports of products on this channel , That dropping on the lids must have been fun and that final test of the legendary Farmabago was hilarious , Thank you for such a great channel your work is much appreciated .

[@ProjectFarm]

Thanks so much!

[@risingstar1309]

The amount of work that must go into these videos is incredible. I’m curious what your work flow is like behind the scenes.

[@davidbullard3036]

Always the testing we need, given by the man we don’t deserve. Thank you, Todd.

[@HUKIT.]

Wow it’s amazing how you keep putting these ideas into quality videos, well done as always lad!

[@ProjectFarm]

Thanks so much!

[@EAGray-fv1rl]

Would love to see one on coolers! This one was much needed and Appreciated. Thanks man!

[@shettaal]

Same here, i would love to see if there is a cooler out there that can keep my food at a safe temperature for 24hrs+ with one or two bags put in at the start of the day. i drive truck and have a mini fridge and i haven't had a fridge yet that could decide if my food needed to be frozen or too warm.

[@benbraceletspurple9108]

@@shettaal I use those LIFETIME coolers from walmart, but Orion coolers are even better. then there are some aerospace tech companies that sell storage containers for chemical shipping, which are double wall vacuum insulated just like a thermos but they cost even more than Orion coolers, whilst having much more space on the inside compared to the Orion coolers.

[@electronicsNmore]

Extremely thorough testing as always! You need some fuel squirting into the exhaust cones of the Farmabago so we can see huge flames as you're moving along. LOL Great video!

[@ProjectFarm]

Thank you!

[@DocFarmer]

@@ProjectFarm Thanks for another great analysis. However, I was surprised - ALL of the flasks were made in China? Are there none from the US available? That's not a complaint, it's a point of curiosity, because for all I know, China may have the market cornered.

[@thedancingpickle6362]

@R I T A • Н О Т • G І R L shut up

[@jamesmancuso3666]

@@ProjectFarm would like to see ice chest testing. Styrofoam, yeti, coleman, etc... Also with and without rock salt would be nice.

[@timmack2415]

@@thedancingpickle6362 They are scammers

[@anonimo_surfeador]

I've been using the 24 oz Coleman for 3 years now and I love it. The cover for the mouthpiece, wide opening for filling, cold retention, and shape and size of the bottle for placing it almost anywhere makes it unbeatable for the situations I need it in. I have damaged a few of them just by dropping them but I like my stuff to be completely scratch free and dent free even if still usable. I would still rather buy replacements than go with a different bottle.

[@ProjectFarm]

Thanks for sharing.

[@aaronpearson1744]

The coleman was consistently one of the best in every category, while the others seemed better at one thing or another. Plus the amazing design of the cap, which this video doesn't really detail. Imo it's a clear winner

[@user-by7hj4dj9s]

@@aaronpearson1744 it is also has a very good seal. i have not experienced any leaks with it.

[@mr5bassman]

I suggest testing hard and soft coolers, including Yeti, RTIC, ORCA, Coleman, and Igloo.

[@DirtyMechanicG35]

mr5bassman so many people have already done that.

[@user-bm3qb4ir7g]

@@DirtyMechanicG35 but, has this man done it?

[@joelwallace9199]

@@DirtyMechanicG35 yes, but have they tested them as thoroughly as this man. No? Because nobody tests shit like this man.

[@Falcon.993]

RTIC is the best

[@whiskeya1207]

The yeti cooler is like $300🥴

[@desertfresh3740]

At Stanley, we fire the whole bullet! That's 60% more bullet, per bullet!

[@endutubecensorship]

I know right, graphics designer must be from hollywood

[@ProjectFarm]

Thanks for the feedback.

[@scottmccutcheon170]

@@ProjectFarm demon ranch shot some stanley 22lr wins

[@TheSzalkowski]

For this time of year, maybe test storage totes for all of the people "organizing" for the new year. Which ones gets brittle at cold temperatures, resistance to DEET spray, etc. I foresee a test rig with a log on a chain slamming into a loaded tote to test resilience.

[@henrybeck7610]

Thanks

[@ProjectFarm]

You are welcome! Thanks for supporting the channel! I really appreciate it!

[@Huey_N]

Dang, not a single one made in the U.S.A. Great video as always Project Farm!

[@ProjectFarm]

Thanks!

[@minh-hieunguyen6096]

China, China every where

[@jackson6745]

Very sad.

[@PGee.]

Thats because the american workers want to much if they were made in USA they would cost way over $50 to purchase so dont complain and take what you get......

[@Huey_N]

@@PGee. you are absolutely right. I would still buy it though, lol.

[@randymarsh-Tegridy420]

I’d like to see the high end hard coolers tested. Yeti, Rtic, Orca, Cabelas, Pelican and so on. Maybe the 20/30oz tumbler mugs? Everyone talks Yeti up, so to see them compared again would be nice.

[@FATMAN828456]

id love to see some high end coolers get tested

[@JohnnyHoot1]

Rizknows channel did a great test with this

[@kameljoe21]

There is no point in testing hard coolers. Coolers on sale has done a lot of testing on them. They did a lot of test over the last few years and you can see that Yeti, titc, orca and other brands are not worth the money. I bought one of the lifetime coolers from Walmart and its among one of the best low budget coolers and is far better than the yeti. kzbin.infovideos

[@gus473]

Hank, I really miss your TV show! "Hey!" Peggy & Bobby!

[@randymarsh-Tegridy420]

@@gus473 boy ani’t right

[@tempestSH]

I'd be curious to see how well the bottles performed after the side-drop test. I suspect a big dent on one of these would seriously impact their insulation ability, as it would cause part of the outer shell to come into contact with the inner shell, which would probably create a spot where temperature could change much easier.

[@ProjectFarm]

Thanks for the suggestion.

[@Starburstguy]

Yes it does affect the insulation. At least from my personal experience using hydroflask, when I’ve dropped mine and cause a large dent, the bottle’s insulation integrity is over. You’ll feel the hot or cold transferring from the damage area. The bottle just becomes another bottle container and no longer able to hold it’s contents temperature as designed to do so. Again, this is from personal experience on Hydroflask, not sure about the other brands.

[@yanso5271]

@@Starburstguy I think you're right. I have the same experience with two of my three Klean Kanteen double-walled bottles.

[@ericarmstrong5506]

Has Project Farm ever tested hoses, either garden hoses or "contractor quality" hoses? I don't know how they could be tested, but I bet PF would know.

[@jeremykoehn4004]

Do it Project Farm

[@MO_Lip_Ripper]

I use water hoses for my business every day. Constantly reeling, unreeling, dragging, etc. I've tried many, many brands. The best I've found is the Flexzilla hose with the updated style of connector with the gray swivels. They're light, UV and chemical resistant, durable, very hard to kink and the bright neon color really stands out so less chance of someone tripping over them or running them over with a lawn mower. You can get them in the standard lengths and in standard 5/8" or the larger 3/4". I'm no Project Farm but I've spent a lot of money on hoses and Flexzilla is by far the best.

[@MO_Lip_Ripper]

I will say, the neon color does fade a bit after a couple seasons but abrasion and living in the South with our summers is pretty hard on stuff.

[@stevewilson9792]

YES! PLEASE TEST 75' X 5/8" GHT FITTINGS BOTH TYPES OF ALUMIIUM. And BEST BRASS FITTING ¹ Check for fungi groing on,&insde the nose &fuet "

[@DinoNucci]

Great idea

[@TheRealChetManley]

Recommendation for video: Was watching Rose Anvil channel as he did his best to test an "indestructible" safety shoe. At the end he mentioned he would like to do a Project Farm style test on Safety shoes. I propose a safety shoe/boot test collaboration with Weston from Rose Anvil! Would be awesome as he knows quite abit about footwear and you are able to do amazing testing. Also safety footwear certainly applies to this channel. Cheers!

[@bassjumpblues3631]

Mr. Project Farm, There is no doubt that you put in a whole lot of time doing the research format you made for research and yourself. There is nobody that dedicates your show to depict, accurate results. Very informative and we love you!

[@ProjectFarm]

Thanks so much!

[@bassjumpblues3631]

@@ProjectFarm Is a farm of learning and lifestyle. Yep learning from those who seek the truth of comprtition..

[@secretariat1703]

I am a hunter and i carry an Hydroflask in my backpack in fall for whitetails and i am not surprised how good they performed with your tests! I am so happy Hydroflask rules! Surprised about Yeti’s loss of heat!...

[@ProjectFarm]

Thanks for sharing.

[@stormingsharks]

Great video! I love how thorough and objective this experiment was. One small detail in the video that should be corrected is when you refer to the bottle's layered construction as "air gaps". They're actually vacuum gaps, which actively prevents heat transfer through a lack of convection. If they were actually "air gaps", they would heat up within minutes instead of hours.

[@ProjectFarm]

Thanks for the constructive feedback.

[@Hrethgir]

I was going for another temp test after doing them. If the dent makes the outer skin touch the inner skin, you'll get heat transfer, and a little debt can make a big difference in temp performance. Great video though!

[@WapTek123]

"some" are a vacuum but "some" have air or other gas in this gap

[@Hrethgir]

@@WapTek123 Either way, whether a vacuum or an air gap, if the outside skin is touching the inner container, it's going to cause issues with heat transfer.

[@brada1997]

It's not a complete vacuum. There is still some air. I guess they could just be called "gaps".

[@henrylima6974]

Lol, you kept calling the coleman "STANLEY" in the both drop tests. Great video never the less.

[@ProjectFarm]

Sorry about that! Thanks for watching!

[@AquaDogTTR]

FINALLY SOMEONE DOES THIS... I'VE BEEN WAITING FOR THIS.

[@ProjectFarm]

Glad to hear!

[@whodahellru8124]

It’s a several years late for me, but I appreciate the data. I’ve purchased a variety of water bottles over the years and have finally settled on hydro flask containers. In the past 4 years I’m currently on my second one because as you’ve stated they’re not that durable. They can take a few hits and still function _(although the chipped finish and dents bother me)_ but once you’ve damaged the vacuum seal and it no longer keeps the contents cold/hot it’s time to replace it. Overall I’m happy with their performance to cost!

[@DeffNotMittRomney]

@@whodahellru8124 I had similar findings. With that being said, check out Ecovessel. Similar stylings and better thermal performance. Are they more durable? who knows... but they can be acquired for half the cost w/constant promos. I have a 20, 32, and 64oz version. A family of hydration. The only thing I've found to outperform them is the 25oz Swell bottle, but that's both expensive and not very durable.

[@michaelgandy4684]

I've had multiple brands of water bottles/ thermos and the thing I've noticed is there's a big difference in durability of the lids. I only use Yeti and hydro flask now. They hold up really well. Very impressive

[@benben6054]

For looks yea but if you don’t have the money colmen all the way cheap and just as good

[@dapeach06]

Ok but the Yeti performed poorly on both hot and cold insulation

[@campomambo]

@@dapeach06 he didn’t test the yeti with the standard lid. With the regular screw on lid it performs much better. I know because I bought a sport top lid for my yeti and I noticed a big difference in temperature retention.

[@visionsofpromise]

Thorough, unbiased review. Because of this video I ended up getting the hydroflask and I am glad I did. You have earned a new subscriber!

[@ProjectFarm]

Thanks! Thanks for watching and subscribing!

[@AndyMcBlane]

guy at the cash register must be like "wow you're thirsty"

[@ProjectFarm]

lol Thanks for watching.

[@legionofyuri]

r/hydrohomies represent

[@jed-henrywitkowski6470]

Lol.

[@Arkangel88Mr]

My sons hydro flasks are still doing fine. Durable enough for me. Good work. Subscribed.

[@ProjectFarm]

Thanks! Thanks for watching and subscribing!

[@badlilstang]

I picked up an Owala bottle recently.. LOVE IT.. ice stays frozen overnight and the built in straw is awesome!

[@ProjectFarm]

Thanks for sharing.

[@trashflood7883]

Great testing! One small thing, you called the Coleman “Stanley” a couple of times. 👍🏻

[@balisticjoe]

That threw me off too, shame since it seems to be the best value

[@ProjectFarm]

Sorry about that!

[@chrisman3673]

I realized that to

[@pogonick55]

Project farm: "We're gonna test that!" Manufacturers: 😳😢😳😢

[@bobkin611]

Lmao

[@ProjectFarm]

Thanks for watching.

[@jmac6248]

Liked before even watching. Know it's gonna be good.

[@ProjectFarm]

Thank you very much!

[@NC-oy8hq]

Same thing I do every video Every PF video that is

[@BlackShaD0Ww]

Me to, always.

[@doc559]

🏆🏆🏆👍🙏 Thank you for sharing

[@beastmastreakaninjadar6941]

After seeing this vid a few months ago, I put the Coleman in my Amazon wishlist. Someone then got it for me for Xmas. I've been using it constantly for both hot and cold beverages since. And I love it.

[@ProjectFarm]

Thanks for sharing.

[@DavidStrchld]

It would have been interesting to see how the volume of liquid factored into those times. It would seem to make sense that a larger volume of hot or cold water would be an advantage, but that advantage would not be due to the insulation. Additional just a side note the drop on the lid test demonstrates the power of hydraulic shock, other such examples is bowing the bottom off a glass bottle.

[@ProjectFarm]

Thanks will do!

[@jhe9488]

Yes absolutely. There’s huge difference in volume between these bottles. A larger volume has an advantage of much better volume to surface area ratio, but also with a larger volume of liquid, it would warm up a lot slower. A better test would have been to have the exactly same volume of water in each bottle.

[@Nevir202]

An interesting point, but at the same time, shouldn't you test them how they will be used? Their size is part of the design. You aren't going to be half filling them in daily use for some sense of "fairness." Also, I don't think it's going to make the difference you think it is. Say the largest one ends up only half full, now the only path of heat ingress/egress is the travel all the way between the lid and the liquid along the thin aluminum wall, or convection through the air in the bottle. Both are gonna be pretty inefficient at heat transfer.

[@nobodyyouknow1065]

“Responsibly made” sets off indirect alarm bells for me

[@Alexander_l322]

Why? I don’t get it lol

[@Binford2500]

@@Alexander_l322 because it is unverifiable marketing wank that doesn’t indicate good quality, or guarantee that it is actually responsibly made.

[@nobodyyouknow1065]

@@Alexander_l322 if those are truly “responsibly” made (whatever that means) are the ones just marked Made in China irresponsibly made?

[@xenonram]

@@nobodyyouknow1065 yes

[@Alexander_l322]

@@Binford2500 oh okay then

[@itsgabegutierrez]

These are good tests. Temperature retention is number one for me, especially cold. I have dropped my Hydro Flask at work (I'm a handyman) quite a few times but it has held up with a few dings.

[@ProjectFarm]

Thanks! Thanks for sharing.

[@kristianzavala2649]

Here I was looking for what screwdriver to purchase when I found this channel, a week later I have seen an absurd amount of videos about products I dont really need but I still enjoy knowing how to determine better quality products overall. I do want to buy a Coleman bottle now 🤣 Keep up the great work!

[@ProjectFarm]

Thanks, will do!

[@joemyers7567]

Would love to see a part 2 with a few more reputable names like RTIC, Reduce, Ozark, Pelican and ORCA in Tumblers.

[@JR-uy3zo]

45 degree latitude

[@Ea-Nasir_Copper_Co]

I’d like to see less "reputable" but more accessible/affordable names like IKEA.

[@machooke4846]

Wow, YETI with a strong showing of last place in almost every insulating test! 🤣

[@Rhaspun]

Over rated by their fans.

[@andym1223]

@@Rhaspun not really. I have an older design that holds temperature really well. It seems that water bottle style design sucks.

[@franciscotorres1005]

I have a yeti cuz i got it on discount and its ok, i only like it cuz it holds a fair amount of water cold for the time i need. At least i know itll survive drops 😂

[@Rhaspun]

@@andym1223 Yours may be better than what was represented. But others and myself are probably interested in what is available in a store or online right now.

[@jajones11]

Most people who really use them for the durability, I loved the hydro flask I had but it just kept denting because of the sharp angle on the bottom

[@algsoccerstar]

Thanks for the video. A quick suggestion, KZbin has that new feature where you can add time stamps within your video and label them based on different topics covered in the video. That way it will be easy for viewers to see exactly what they’re looking for

[@ProjectFarm]

Thanks for the suggestion.

[@KC_G4S]

Very interesting results, however one thing I noticed was that for a couple of the bottles during the heat/freeze test, the water was filled up to the brim. This could negatively affect those bottles by allowing the uninsulated plastic to be in contact with the water, which will cool it faster than if they were not touching. Just a slight nit pick, otherwise great vid!

[@henryshen1156]

I think if “Zojirushi brand” were included in the test, it would have easily taken the title on temperature retention. Zojirushi makes excellent insulated bottle.

[@ProjectFarm]

Thanks for the feedback.

[@Yoknapataphaw]

Agree.

[@BiggCliph]

Yes! Zojirushi’s stay hot all day long

[@Flumphinator]

Seems like they make good stuff all around.

[@3nglehart]

agree

[@QueenDarkChocolate]

I own a Zojirushi thermos made in Thailand. I must say that it keeps liquids hot for many hours (never tried cold but assume same results). For a small affordable thermos it's pretty amazing.

[@ProjectFarm]

Thanks for sharing.

[@dmatahari]

I was going to say the same - the zojirushi brand thermoses are pretty good. I have some yetis (and off brands) as well, but the zojirushis are so much better.

[@xiankenji2981]

I got a zojirushi, been using it since 2016. Used many different brands of bottles alongside it , zojirushi out lasted all others

[@laffreux29]

Zojirushi is by far the best thermos ive ever owned.

[@rogierius]

which Zojirushi did you buy, there are quite a few different ones out there. And does yours have an inner coating or bare stainless steel?

[@rednael6526]

I own a Stanley thermos for a few years now and can say that its really good at insolating. I once left it out in the sun during a camping trip for like 30 min. Real hot day. Couldn't comfortibly touch the thing anymore yet when I the water out it was still ice cold. Also handled me dropping it a few times pretty well. Haven't tried much other flasks so I can't say if its anything special though.

[@peterford9369]

I usually buy Thermos brand. I like their large mouth for food. Super for chili and stew and soups. I guess once you buy a brand and it works, ya stick with it. Take care.

[@thinking6307]

@@peterford9369 Yes, Peter...Exactly my brand of choice after many years of comparison/contrast use... Thermos. The lids/caps on Thermos are better and more durable too. I do pre-heat for coffee/tea..and it has never been beat by any other i've tried.

[@jamesherman1350]

OMG! I love the Farmabago. Absolutely hilarious. I'm surprised that the Yeti didn't perform well. I have a Yeti 32oz cup and if put something hot in there is still ridiculously hot even half a day later. Great video.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@Platypi007]

This guy is so methodical, not many reviews are going to be so unbiased and scientific in their process. Much appreciated!

[@ProjectFarm]

Thanks!

[@kw1527]

I honestly this is the most detailed and in depth video I have ever watched !!

[@ProjectFarm]

Thanks!

[@shelbywise5055]

My daily water bottle is a Coleman, same brand as you tested - I'm happy to know I coincidentally made the right choice! :) love your succinct video styles

[@ProjectFarm]

Thanks! Thanks for sharing.

[@StateofDecayScience]

Great video as always! One missing test is inner volume to outer volume ratio!

[@ProjectFarm]

Thanks! Thanks for the constructive feedback.

[@jorgegalindo4014]

I love the internet because of people like you. Thank you. 😔💙

[@ProjectFarm]

You are welcome!

[@vdubbub1986]

I'm waiting for the best circular saw blade test. Can't wait!! Project Farm does the best tests!!

[@ProjectFarm]

Thank you! I'm still trying to come up with an innovative way to compare them. Making progress. Thanks again!

[@AlexKiritz]

@@ProjectFarm Steel cutting circular saw blades like the Diablo steel demon are on another level.

[@vdubbub1986]

@@ProjectFarm Great to hear. If anyone can debunk the claims both diablo blades and dewalt blades claim it's the unbiased testing of Project Farm.

[@TwistedSou1]

My coworker brought in a new insulated flask t'other day, he was excited to tell us it kept hot things hot and cold things cold. "Well, what do you have in it?" "Two cups of coffee and a popsicle!"

[@ProjectFarm]

lol Thanks for sharing.

[@tommarkey2367]

LoL!

[@DOC_951]

I don’t know much about water bottles… but I got a thermoflask for Christmas last year, and I love it. It stays cold and the ice will still be present even a day later or the next morning. Always amazes me lol… even 8 months later!

[@ProjectFarm]

Thanks for the feedback.

[@ajdivel891]

I would like to see a video comparing different cooler manufactures and comparing different backpacking tents. Maybe make a whole camping series.

[@ProjectFarm]

Great suggestion! Thank you.

[@haj98]

Awesome video! I’m glad I got the Coleman! One thing I look for in a thermos as well is ease of cleaning. The Coleman also is the easiest thermos to clean since the lid flips completely open.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@vonJaerschky]

Would have been "cool" to throw in a 1970's glass lined thermos from a school lunch box.

[@dontblameme6328]

I still use my 1960s glass lined USA made Stanley. It out performs those stupid designer brands that are made in communist China.

[@alexanderkramer8270]

For sure

[@royvincent9250]

THEY DID THE JOB BUT THE GLASS BROKE WITH A GOOD HARD DROP

[@ProjectFarm]

Thanks for the suggestion.

[@CrimeVid]

@@royvincent9250 they broke if you knocked them over ! I used to take them fishing and if they got knocked over they died !

[@Stock1897]

amazing! no nonsense, with great lengths taken to minimize bias or uncontrolled variables in the testing, major props!

[@ProjectFarm]

Thanks!

[@bennydarko]

I've used Kleen Kanteen for several years and love them. I have 3 different sizes and they all perform wonderfully. Recently however, I started using the Yeti because of the lid/cap design and love it. It's sad to see it isn't as efficient as the other brands but i drink multiple refills and never notice much of a difference either way. If i ever lose all of my bottles, I'm probably going to switch it up for one of the hydrology bottles. It performed great for it's price. 👍🏼

[@ProjectFarm]

Thanks for the feedback.

[@thirdtres]

got 2 klean kanteen. 1 wide mouth started leaking after just a month of use. the other narrow mouth is still holding on like a champ even after 3 years

[@bennydarko]

@@thirdtres I've got one of those wide mouths too and it's great. Sucks your us leaking though.

[@philipstaite4775]

I have 3 Klean Kanteens - all single wall / un-insulated. I use them for hiking. For me they are a nice balance between price, weight, capacity, and durability. I've put in a lot of miles with them with no issues, just a few scuff marks.

[@Jeremy-rg3bg]

​@@bennydarko what?

[@evilution_ltd]

PF: Hello, I'd like to return this flask I bought, I have the receipt. Seller: Good grief, these look like they have been dropped on an angle iron, dropped on their cap, run over and then cut in half. PF: No, they were like that when I got them out of the packaging.

[@ProjectFarm]

lol. Thank you

[@julsz.8754]

😆

[@royvincent9250]

thats funny thanks for the laugh

[@adidas9694]

Next time on project farm: testing the efficacy of Pfizer and Moderna vaccines after being stored at -40°.

[@albieoval1657]

Or test different distances to contract the virus or hand washing techniques

[@notserpmale03]

Pr not

[@drippingwax]

Fahrenheit or Celsius? :P

[@FredDurst00]

@@Icantfindanavailablehandle Cant be questioning the efficiency or masks or your family gets taken away. Ain't china great?

[@MaC.Istanaz]

Stanley number one. İ born in 1982 , my father still uses the one bought before i born, still works amazing

[@ProjectFarm]

Nice!

[@casperunnerup]

I would really have liked to see the Zojirushi stainless steel mugs. I've bought them for the entire extended family since they have a fantastic lid design. Easy one handed operation, easy to clean and to my mind holds things cool or hot for a very long time

[@ProjectFarm]

Thanks for the suggestion.

[@richardnemeth5911]

Yea zojirushi is a serious product that could easily stand up in this challenge.

[@asuka1658]

We should add TIGER as well. They are the rival of Zojirushi in Japan since a loooooong time ago

[@grahamdonaldson29]

Zojirushi is the absolute best.

[@justanotherbozo]

@@grahamdonaldson29 That has been my experience. While purely anecdotal, I live in AZ, and my Zojirushi bottles performs better at keeping liquids cold than the other brands I've used.