PROJECTION OF LINE | PROBLEM 2

[@RahulKumar-nu8dk]

The top view of a 75 mm long line AB measures 65 mm, while the length of its front view is 50 mm. It’s one end A is in the H.P. and 12 mm in behind the V.P. Draw the projections of AB and determine its inclinations with the H.P. and the V.P.

[@binishabhattarai8895]

same solution hoga na

[@pluffy53]

The top view of a 75 mm long line AB measures 50 mm, while the length of its front view is 40 mm. It's one end A is in the H.P. and 12 mm in front of the V.P. Draw the projection of AB and determine its inclination with the H.P. and V.P.

[@zykieba]

The top view of a 75 mm long line measures 55 mm. the line is in the V.P., its one end being 25 mm above the H.P. draw its projections.

[@ashkarkb4133]

The top view of a 75 mm line measures 65 mm while the length of its front view is 50 mm. Its one end is on HP and 15 mm in front of VP. Draw the projections and find its inclinations. 1

[@KEAMFirstTime]

front view of a line ab measure 55 mm top view of line measured 60mm AV measure 75 mm.One end of the line on VP 20mm below the HP.Draw the projection & Find the incline with HP & VP

[@Hydropower575]

The front view p'q' of a line PQ 94mm long measures 60mm and its top view pqis 72mm. Its end Q is 24mn from both the planes. Draw its projections and find inclinations with VP and HP.

[@Himan_shu_044]

A straight line PQ of 50 mm length has its end point P 15 mm above the HP and 10 mm in front of the VP. Draw the projections of the line if it is inclined at 30° to the VP while its front view is inclined at 45° to the XY line. Find the angle made by the line with the IP. Assume the line to he located in the first quadrant.

[@Joan-kawai]

the top view of a line ab is 50 mm and front view is 40 mm position of point a is 15 mm above the HP and 20 mm in front of the VP determine is true length and inclination

[@VivekKumar24bcs089]

thanks

[@VivekKumar24bcs089]

pahle iska true lenght draw karne ke bad with the help of front view lenght and top view lenght then projection of top view and front view ieas sequence se aasani se ho jaiga

[@Engineering_Drawing_Classes]

yes.. Thank you

[@KolavantiSumanth23]

Thanks for the information sir

[@manavraval4801]

Thank you sir for giving us this solution

[@kxpoison4740]

Ultimate watch leli

[@rajvardhantomar2521]

Thank you sir 😊

[@NarendraDevGarg]

Thanks 👍👍

[@subhamkumarprasad4470]

Thanks

[@KarunendraMishra-pc8fe]

Thank you so much sir 🙏