Projections Of Solids: Cylinder

[@HarshKadam-]

Excellent & clear explanation this will help me a lot to understand the Projection. Keep doing this.Thank U very much for such a nice explanation

[@engineeringclassesbydr.noo3377]

Thank you very much.

[@avaripragnasrinaveenkumar9227]

After along time I watched your video it's still I understand well what u r saying. Tnq mam for doing such videos

[@SyedSameena-kd7qq]

By seeing your video iam going to attend exam tomorrow 😁

[@nagarajubabu6560]

Me too🫶🏻

[@MadhuryMadhu]

Thank you mam 😊

[@Viratvishnu05]

Super explanation with good example easy to understand

[@engineeringclassesbydr.noo3377]

Thank u.

[@tharunnayak9660]

I am good learner from your teach mam...thank you for your supporting..

[@abdullahmohamed3969]

Mam continue this u r a good teacher useful with u videos from TN

[@engineeringclassesbydr.noo3377]

Pls share my channel with your friends

[@mithilravirala4046]

A cylinder of base diameter 50 mm and height 80 mm rests on its base rim such that its axis is inclined at 45° to HP and remains parallel to VP. A section plane parallel to HP cuts the axis at a distance of 50 mm from the base of the cylinder. Draw its front view and sectional top view.

[@vivekc-0383]

Tq mam .I understand Easley . Continue and do many videos

[@vimalt4636]

I can easily learned projection of solid:cylinder....with help of ur explanation mam

[@engineeringclassesbydr.noo3377]

It's nice. All the best for your studies. Share my channel with students, like & subscribe.

[@vimalt4636]

@@engineeringclassesbydr.noo3377 definitely mam..our eg sir recommend ur channel

[@engineeringclassesbydr.noo3377]

It's nice

[@SaniyaMahammad]

Thank you mam ❤

[@venuyadav3470]

really superb explanation mam😇💗

[@forfiverr3873]

Thank you ma'am, so much help in exam time...too good ❤️

[@engineeringclassesbydr.noo3377]

All the Best for your exams.

[@krishnendun2733]

Thank u so much mam...for ur wonderful class ..

[@engineeringclassesbydr.noo3377]

All the Best for your Studies.

[@vuchidevisrisai2466]

@@engineeringclassesbydr.noo3377 thank you mam 🙏

[@mejarinagendra2765]

Your teaching is super madam

[@engineeringclassesbydr.noo3377]

Share my channel with students

[@mejarinagendra2765]

Oky madam

[@devapatole4687]

A cylinder of base diameter 40mm and axis length 60mm is kept on the H.P on a point of its base circle such that its axis is inclined to H.P . at 30 degree and parallel to V.p . Draw the projections of cylindeR.................................................... (Mam plazzz solve on this)

[@engineeringclassesbydr.noo3377]

You will get similar diagram with angle 30°, and front view is touching XY line. There is a gap between circle and XY line. We can take any gap between them.

[@rajumahajan8514]

Perfect explanation mam 👍

[@engineeringclassesbydr.noo3377]

Thank you

[@RishiVaish-ym1nr]

Thank you so much ma'am

[@Naruto..-believe_it]

Mam thank you so much... Tomorrow is my exam an now I am. Ready!!😅

[@bommedaajay4007]

5 A cylinder having a 50mm base diameter and 70mm long axis has a point of its base circle in the V.P. Its axis is inclined at 30 to V.P and 45 to H.P. Draw its projections.

[@engineeringclassesbydr.noo3377]

Check the playlist for this question

[@Nomaan142]

A cylinder of diameter 50 and axis 65 mm long is lying on H.P on its curv surface with axis inclined at 45° to V.P and parallel to HP. Draw the projections Ismei mam circle xy line ke uppar bnaou aur fir square wala cylinder niche uske woh square se ek line leke right mei uske 45 degree leke tilt krduna usko vp mei inclined krne ke liye ...... Right haih aisa?

[@engineeringclassesbydr.noo3377]

Right haih

[@Nomaan142]

Itna krne ke baad joh uppar 2 circle banenge usme se 1 full line or second vala kaisa rahega half shaded or full?

[@Nomaan142]

???

[@Nomaan142]

???

[@engineeringclassesbydr.noo3377]

Second vala half dashed line

[@youtubekabaap7978]

Nice explanation mam

[@engineeringclassesbydr.noo3377]

Thank u

[@103-subhangipriyadarsini5]

Maam i need one help Am not able to do one question...can uh plz explain?

[@engineeringclassesbydr.noo3377]

Sure. Pls share the question.

[@kohli782]

Superb explanation keep going mam

[@engineeringclassesbydr.noo3377]

Thank you very much.

[@praveeneditz2393]

Mam circle is compulsory divided into 12 parts or 8 parts

[@engineeringclassesbydr.noo3377]

We can divide as we wish.

[@samarthpatil400]

Awesome mam❤ I thought graphic is so hard but after watching this now I m feeling positive that I can crack the exam

[@engineeringclassesbydr.noo3377]

Very Good. Yes u can. All the Best.

[@nileshjadhav_o7]

Yes mam your video are very helpfull

[@engineeringclassesbydr.noo3377]

It's nice, thank u. Like, subscribe and share my channel with your friends

[@nileshjadhav_o7]

@@engineeringclassesbydr.noo3377 Yes mam I had shared

[@chlakshmidurga481]

Mam the 70mm generator isn't touch the x-axis or not mam

[@engineeringclassesbydr.noo3377]

Yes

[@sivaakshintala3665]

Plz tell where we can use h , hp and 2h pencil

[@engineeringclassesbydr.noo3377]

Front view and top view should with HB, Extension lines should with H and dimensional lines with 2H.

[@sivaakshintala3665]

@@engineeringclassesbydr.noo3377 thank u mam

[@Max-hl1qt]

Mam please give some important questions for exam preparation 🙏

[@engineeringclassesbydr.noo3377]

Conic sections, Involutes& isometric Views& projections

[@Max-hl1qt]

@@engineeringclassesbydr.noo3377 Thank you so much mam.i was really confused which topic I have to study for exam. Now I'm clear now . Thanks alot mam

[@engineeringclassesbydr.noo3377]

See all topics for getting 100%marks.its easy to get full marks. Develop interest in drawing, watch all videos. Drawing is an art & fun. Try to get maximum marks not only pass marks

[@Max-hl1qt]

@@engineeringclassesbydr.noo3377 Ok mam your explanation is so Mach intractive and getting easy to understand

[@farhanuddin7739]

Thnk u mam👍

[@ZSMTA]

Excellent

[@engineeringclassesbydr.noo3377]

Share with students

[@ZSMTA]

Defenitely mam 🎉

[@mejarinagendra2765]

I can easily understand

[@KotnaniMadhuri]

Why circle touch the xy reference line mam

[@engineeringclassesbydr.noo3377]

It has given in the question that one of the generator in the V.P.

[@RohitChhabirajYadav]

Thank uh ma'am ❤️ finally understand projection of solid - cylinder

[@engineeringclassesbydr.noo3377]

Share my channel with students

[@RohitChhabirajYadav]

@@engineeringclassesbydr.noo3377 sure ma'am 🙂

[@thirupathinagulathirupathi8867]

Tanks mam your saying excellent mam

[@engineeringclassesbydr.noo3377]

Share my channel with your friends

[@AKHILog18]

Today 9 am my exam im watching at 6 am 😂

[@arjunvarmamaths1349]

Mam central axis is not mentioned. O1, O2

[@engineeringclassesbydr.noo3377]

Pls do it at center of Cylinder in your practice of Drawing

[@arjunvarmamaths1349]

@@engineeringclassesbydr.noo3377 ok mam

[@engineeringclassesbydr.noo3377]

Like, subscribe and share my channel with your friends.

[@ssvchannel1052]

Nice mam

[@engineeringclassesbydr.noo3377]

Share my channel with students, like & subscribe.

[@kgvenkatesh7073]

Hi

[@PO__PANDA]

Ma'am please make videos on nut bolts rivets and joint there is my exam in mid july please ma'am if your are free just basic teachings ma'am because i am not from mechanical branch my branch is civil engineering

[@PO__PANDA]

Why we divide in 12 parts 6 parts can also be devided