Propane Fire Training Prop Pan

[@rockywhite1026]

They've made every aspect of live fire training far more difficult than it needs to be imo. Think I'll sell this idea to my chief.

[@miniramplvr]

Have you ever tried putting this out with a pressurized water extinguisher? Curious if it would work for training people with less mess and easier refills.

[@christurner7288]

That would work for training, the fire will not go out but you can shut it off once you feel they have done a good enough application.

[@jeffdufresne2585]

Chris, What is the specifically designed tank that won’t restrict flow. We made a similar one before I saw your video and we seem to have something restrictive in our flow?

[@hecmedic41]

I'm having the same issue. Mine will not stay lit in the pan.

[@kirkofistan]

There's black, green, and red "QCC" fittings, which are the ones you can hand tighten and don't need a crescent wrench. The green colored one has a higher BTU flow rate. If you don't mind using a crescent wrench, you can get a "full flow" POL fitting.

[@AbdulWahid-xn2mt]

what is the spacing of hole and drill sizing of hole

[@christurner7288]

7/64 or 1/8 holes spaced every 3-4 inches.

[@apodaca309]

Neat we need a set of these things for class

[@Gintarskhmm]

I would like to make also

[@Keeping-it-real71]

what size are your holes for the propane to flow through?

[@christurner7288]

Something like 1/8 inch or so.