Propane Pipe Burner for Firepit

[@Nine-ni9do]

For LP (propane) you will want an air mixer installed right where the line goes into the burner. This is safer with LP and will help burn cleaner and reduce soot deposits. You will not need an air mixer with natural gas. Good Video

[@jamesholcombe435]

Venturi

[@jeffmcmillan945]

This is how a youtube video should be done! Great video

[@TimberTea]

ahhh thanks Ryan was stoked to hear that !!

[@roba2764]

Good info. Use a drill press vise to hold the pipe when drilling.

[@shayanderson4935]

This was the trick to the “Burning Bush”, which Moses learned from a similar DIY KZbin video.

[@nivek7695]

Great video. you should use a air mixing venturi with propane as a fuel source. This will insure proper combustion, otherwise you can risk pooling up some unburned gas in the bottom of your pit and create a fireball which wouldn't be great when your kids are roasting marshmallows.

[@DetroitHomeInspector]

I already bought half inch pipe for this. No issue I hope. Nice short, to the point vid!

[@spraynprey1044]

For a bigger flame the hole can be 3/32" or 1/8"

[@winzerwithaz]

Thanks. This is genius. Just made 2 crematorium booths for upcoming VAIDS epidemic. We tested it out on grandma and there was nothing left but her titanium hip!

[@alexandrealbergaria6224]

the first ball of fire was crazy

[@TimberTea]

Haha yes it was !!!

[@Omegaman3]

This one was pretty good, thanks!

[@Da_Sweeper]

Bro I am so sorry but when you put that flame to that pipe and those flames came out on you I had no choice but to lol from your reaction 🤣🤣

[@matkyne671]

The Teflon tape is not necessary. The burner is literally full of holes and therefore won't hold any pressure.

[@VloggingLife.]

OMG I can't believe how easy this is... I'm gonna have Torches and fire pits all over now... LOL

[@TimberTea]

hahaha yes! the possibilities are endless! :D

[@wemcal]

Great video

[@frankschannel2642]

A right angle pipe / adapter on the underside would be far more convenient and space-saving. Otherwise, nice build!

[@terrencedomingo3360]

thanks man. That was cool dude.

[@TheJohng22]

He burnt his hair off with that first pipe lol just kidding

[@asiago100]

You make it look nice and easy!! Wish you were my neighbor 😉

[@jaydenhigginson2964]

First great video, really liked it, nice burner, . i have a question? can i use longer pipes on each end of the T so i have like 5 feet on one side and 5 on the other for a longer 10 foot fire table. should i use less holes drilled so the gas will get to the ends of the pipes. i bought the air mixer and 20 pound hose and regulator you recommended , . . . . and would it work if it was one long 10 foot stick gas pipe and propane tank just on the end instead of the middle with a TEE.

[@FisherCatProductions]

This is trial and error, but simple. RULE #1 DRILL SMALLER AND LESS HOLES THAN YOU THINK YOU NEED! You can easily enlarge them or add more! Due to the low flow velocity, if it's is unlikely that you will experience a signficant drop in a 5' pipe, for 10' that is small dia, see rule #1.

[@billyturangan3085]

Hello, Are you not using an air mixer? Please explain so that everyone knows your reasons.

[@Rohit-oz1or]

Are there any safety issues with this. Can the fire travel back into the cylinder somehow and blast the cylinder?

[@williamokrasinski9840]

Thanks for this video. Very much what I'm looking for and Not a forge burner. Apparently this burns without a Venturi ? I need this type of low heat flame to kill mites from grooved boards 8"x 8". I have the regulator for a forge burner, but the blue flame is too hot.

[@user-is7up5uv2l]

So question - this is safe ? Nothing needed but a regulator at tank side ?

[@ericd8499]

Where’s Heidi?

[@strangewayfaringstranger]

Man make fire. It good.

[@dolfinmagikpro]

Great info! Thank you! I assume that this would also work with Natural gas. Yes?

[@bigred4273]

Great video. I’m wondering where did you get that concrete block, and where do you get the decorative rocks at? Thank you.

[@cudelsx]

Try using volcanic rock

[@oneconsc3333]

He made it himself. He has another video where he shows the process🙏🏻

[@barrydavis9668]

LOVE the video. I am trying to make a propane gas burner to start the fire in my fire pit 36" circular. Would this work? Like a home fireplace with NG to start it. Comments and Ideas Please!! Thank you

[@Globemaster03]

You need to buy some gas nozzles and it's perfect. Otherwise it chucks out far too much soot.

[@shahphone]

End product is a slight of hand switch to a fire pan and commercial burner lol

[@stephanpaul8954]

excuse my ignorance! I dont know how propane burners work, how safe is this? could the flame not back up? I have a bbq for camping that I LOVE but... the burner is toast and there are no replacements.

[@gongwonFC]

Would this same setup work for natural gas?

[@crankshaft007]

Why no air mixer? Every other diy and commercial unit has one?

[@probusmex]

awesome! thanks for sharing Suscribed!

[@areseses1773]

So this doesn’t even need venturi EFFEFT , so is simple😅

[@JohnStegmeier]

when you say you couldnt find a mixing valve that would fit the burner, do you mean thread size or...???

[@goexplore318]

Nice, does that have a air mixture valve on it ?

[@BryanBrews]

Why didn’t you add an air mixer to propane line?

[@Bamaoutdoors]

Wow that's awesome! How is it holding up?

[@ya00007]

Why no air intake hole?

[@NSSPhotography]

3:26 = Pyro Soul fully exposed! LOL

[@TimberTea]

🤣🤣🤣

[@henrymontoya4918]

I need 2 of these on a larger scale .. 2, 60 inch pipes … is this possible?

[@keithfeek]

What’s the max length for a 20 lb lost tank

[@haroldtacroes5326]

Hi , why you don't use orifice?

[@hwfranjr]

Was funny,think hes learned to be ready to light running propane and keep it away FROM YOURE Face and body,lol

[@joealbano2533]

Just about to build a burner. What's the purpose of the holes in end caps and T. Thx great video.

[@ShanePresleyC]

Same question! is it just to prevent build up?

[@KsMario]

How long can I make the pipe without running into gas distribution problem? I'm trying to make letter and words!

[@piccolofratelo9633]

Will this work with natural gas?

[@hwfranjr]

Can ya make this a 3 or 4 burners 4 ft EACH?

[@justanothermechanic8183]

Did you just use a straight fitting into the black iron pipe? Typically for propane it should be mixed with oxygen before ignition. I ask because I was going to make one, and I was looking into where I could find a Venturi fitting

[@TimberTea]

Hey Justan ya I actually went out and bought an air mixing valve on Amazon linked to it in the description above if your interested is seeing it. The problem I ran into was the burner is so small that it won't work properly. It basically just spits out propane where it should be sucking in air. The one I had was for a 1/2 inch pipe. Which would be fine for a large fire pit but not so good for this small burner application. Anyone else able to find a smaller mixing valve online ?

[@periclestsellos6746]

@@TimberTea Curious about this... I was planning on doing the same project and also using a 1/2 inch mixing valve. Obvious question, but the mixing valve is directional. Are you sure its not installed backwards?

[@ThomasWeissJr]

@@periclestsellos6746 you should look into a venturi (not air mixing valve) so you can adjust the mixture to fine tune the flame. good plan here for next to nothing. www.rayrogers.com/venturi.htm

[@brianiwan4305]

1:02 loses facial hair lmao!!

[@TimberTea]

😂😂😂 at least then it will match his head hehehe

[@denverdantheman853]

Is it the same recipe for natural gas?

[@marlangeiger9843]

Where was the pan from

[@jaysayed2779]

Great video! Definitely gonna try to adapt this to what I need. But what I need is a burner for a DIY pizza oven (traditional done type) - any tips on making a pizza oven burner?

[@sto2779]

0:59 this dude almost burned himself... lmfao

[@TimberTea]

I might have singed a eye lash or two !!

[@35Gmbit]

@@TimberTea Entonces fue ahí donde perdió el pelo

[@williamcastleberry7338]

Your burning way to rich on propane, your flame's should be blue not yellow.

[@NatinaFood]

I shouldn't tickle that :D

[@llisagomez5706]

My at home propane indoor fireplace only has a narrow small flame. And I want the flame to be more spread out. The place i got it from, woodland direct, is no help at all.

[@seejennings]

At my local big box hardware stores they have black pipe and galvanized. Does it matter which one I use?

[@neipamocal]

Use black pipe. At high temperature the zinc coating on galvanized pipe will give off toxic fumes.

[@chriss8354]

@@neipamocal won't black pipe rust?

[@neipamocal]

@@chriss8354 everything will rust after being exposed to heat like that, even stainless steel. Black iron pipe would take years to rust if cared for properly. A simple cover to keep the rain off when not in use and you'd be set. But the gas given off by burning zinc can kill you.

[@nfn7121]

Hmm might not want that tank so close to flame. One small leak on a hose and that could have been a bad day.

[@TimberTea]

😬😬😬

[@irvinwittmeier5208]

!;-)

[@alexmiller1193]

this isn't safe no pilot no safeguards any idiot could have done this.

[@bstack10]

What is the block ?? Is it a breeze block??