Proper and Professional Windshield Replacement | New Auto Glass . How To find professional auto glass company . mazda 3 auto glass replacement. How to replace a windshield .
Пікірлер: 59
@willsrestorations5 жыл бұрын
I hope they're paying you a lot of money cuz you are one professional individual, I like the way you pay attention to every detail and that kind of work it was very hard to find, great job man.
@johnw.93632 жыл бұрын
Nice job...you did it the correct way by removing everything cowl panel And wipers...and anything else that needed to be removed...I was trained by other people at one time Who would not remove wipers or cowl panels and wanted to short cut Method done...which I refused to do And got judged for it...but then I was sent to the FORD CARLITE school and was trained by LEN STOLK AND AL GERRARD...WHO I CAN'T THANK ENOUGH..and learned the correct way to replace glass...I become one of the top installers in INDPLS...and was always requested by dealers and body shops to come in and do all their glass work...again great video..because remember the windshield is part of the strutual Integrity of the vehicle and a safety Restraint for your safety and the airbags....
@Slvmmed3 ай бұрын
How did you get dealerships to contact you and do their work?
@xxskabxx3 жыл бұрын
Got to love a rainy day being an installer
@patriotautoglass92265 жыл бұрын
Nice Install! Almost exactly my procedure. Respect for staying honest about being perfect. I started using Proset for help setting its a great tool. Sika all day, P2g+ & Mach 60.
@dineshgurung93912 жыл бұрын
Which sika please give model no of urethane there are so many there
@petermathews9298 Жыл бұрын
@@dineshgurung9391 very true.
@gerardovelazquez35972 жыл бұрын
Great professional job!!
@joelgonzalez56885 жыл бұрын
when your applying the urethane start on the bottom then cut it off at the bottom corner then start again from the top and then reconnect the urethane at the bottom corner with the urethane going on the inside or else water might leak in if you continue starting at the top and connecting the urethane at the bottom corner starting at the top and finishing at the bottom end causes the joints where the urethane meets to go against the direction water will flow naturally during rain fall
@Ya_Mommas_House4 жыл бұрын
Yea fa sho I work with my dad and he makes sure to run the bead that way and makes sure I do them that way to.
@slawomiradamczyk89223 жыл бұрын
Here's little tip for scratch free removal, try to use a bit of insulation tape around your cold knife blade. I would also say keep the open primer away from the customers car😉. Good job anyway.
@miguelgomez49816 жыл бұрын
Hey brother it's Mike from Florida hey great video love it 100% keep it coming thank you for making a difference in my career respectfully mike form Florida
@NEWAutoGlass6 жыл бұрын
Miguel Gomez thank you Mike. No problem. I'm glad that I can help
@perfecttouchautoglass9632 жыл бұрын
Great install. I'm looking for independent glass technicians.
@eriknorton86423 жыл бұрын
The general public doesn’t understand how important the installation of your windshield is. It’s critical that the bonding of the glass to the pinchweld is strong. He is right. Many installers will “ stuff “ the windshield , meaning that the cowl is left on. A definite no no. I was always taught that the windshield holds 70 % of the structural integrity of the vehicle in the event of a roll over. A faulty installation could mean someone getting injured or killed, and the installer could be held responsible. By not cutting corners and not skipping steps, and installer can ensure safety for the driver, and longevity to the vehicles pinchweld and surrounding area. Nice job ..
@WhiteGhost08913 жыл бұрын
Nice work👍
@championwindshieldrepair2165 жыл бұрын
Thanks bro for the morals
@petermathews9298 Жыл бұрын
Thanks for your honesty. I’m ready to install a windscreen. I will ask if they will remove the cowl.
@vdkarautoglassreplacement36426 жыл бұрын
Good job nj keep going....
@NEWAutoGlass6 жыл бұрын
VIDRIOKAR thank you. I'm watching your videos and you are very good at this
@vdkarautoglassreplacement36426 жыл бұрын
thank nj same like you
@user-cz8jt1dn8q Жыл бұрын
thank you sir for this vedeo..i think it realy help me..gobless...
@dgr54212 жыл бұрын
Good job 👏
@eyebidder2 жыл бұрын
what about that registration sticker on the old windshield? Did you remove it and put in on the new one?
@Bigdaddyshaker4 жыл бұрын
What brand suction cups are those? I want to be able to do this by myself in the future
@autoglassalbaloor Жыл бұрын
You did very well
@Flyingcolors-of5sv4 ай бұрын
Eres un pro!
@mabast0075 жыл бұрын
Most people who replace windshield do not use an assist. Like you place the farther side on it and place your side till it sits properly.
@zubzero15133 жыл бұрын
Awesome
@thecardoc82342 жыл бұрын
The customer scrolling KZbin late one night: "hey, that's my car!"
@E_Legal_Alien11 ай бұрын
Do you detach the rear view mirror and reattach to the new one?
@RelaxMusic-gv1bs4 жыл бұрын
✌👍
@curtisramsey22195 жыл бұрын
I live in MICHIGAN I would like to learn how to install windshield
@relaxingasana495911 ай бұрын
What is the technical name of your self-adhvesive tape taht yopu are using to affix the windshield ?
@MrWopwink10 ай бұрын
Is it possible to take out a windscreen without access to the car? I mean opening doors etc.
And setting a windshield in the rain with no cover. So bad omg!
@johnnawrocki40796 жыл бұрын
Pilkington so expensive.....
@Ya_Mommas_House4 жыл бұрын
Yes they are and going up all the time
@jaywitterman27833 жыл бұрын
Should have cleaned and prepped the new windshield first. What if it has a big scratch or rub mark. Oops, cut out the old windshield already lmao!
@mikenagurne3235 жыл бұрын
pro ? no dash cover
@fernandovillalta26314 жыл бұрын
👍👍 you know i thought the same thing he got some nice tools though even tho he scratch it there is ways to control the blade and be more carefully at least he used primer lol
@Ya_Mommas_House4 жыл бұрын
If you know what you're doing you don't need a dash cover.
@Ya_Mommas_House4 жыл бұрын
Naw I'm jk safety first
@mortalstorm4 жыл бұрын
It also bugged me that he stood on the rocker panels instead of using a step stool.
@tommybridges76325 жыл бұрын
Lots of things wrong
@lammy97335 жыл бұрын
What did you catch?
@Ya_Mommas_House4 жыл бұрын
7:57 he left the saw hes cutting with on the dash to switch sides them . I usually carry it to the other side and finish getting it out sheeths that hold the blade get hot so it laying there could damage the dash.
@Ya_Mommas_House4 жыл бұрын
But I do them pretty much the same way
@lammy97334 жыл бұрын
@@Ya_Mommas_House true I always carry it to the other side or put it on the floor of the other side
@YamahaDan1004 жыл бұрын
Never step on the door trims to reach certain part of the windscreen. Gravel or dirt in your shoe would scratch this. If you are scratching the paint even 1 out of 20 vehicles you need to be using an alternate cut out method. Ie wire tool. The customer will see the primer covering the scratch even after the new screen goes in, its too high and the trim won't completely hide it. There is no need to place any items on a car bonnet even with mat. The mat will scratch the lacquer especially on show cars that are flawless.
@toytulog5764 жыл бұрын
What if your 4'5-5.5 ft tall :)
@rjenoel54313 жыл бұрын
Didn't see him index the wipers for exact replacement, didnt taped off paint around windshield, scratches are not ok, hood should never be used for a shelf things get knocked over,, slide, role, no fender covers, work apron scratches the crap out of paint, standing on sill plates without protection. Other than that.
@user-xk3vy9bb5w11 ай бұрын
That’s not a professional job
@veritas21457 ай бұрын
Thanks
@kiliBrtoiP4 жыл бұрын
this is not prof job at all.. how about using kevlar string like it is done in Europe which easier, faster and no damage to paint.
@jiriprachar11452 ай бұрын
+ according to many service manuals you need to apply glue to the glass first, not to the pinchwelded frame