Prototype Hydrogen BMW V12 Engine Teardown - E31 850i - Project Marseille: Part 6

  Рет қаралды 729,785

M539 Restorations

M539 Restorations

Жыл бұрын

Hydrogen-powered V12 engine. Fascinating thing. In this episode, we learn more about the prototype BMW 7 Series, E38 750hL that BMW made back in the 2000s. I stumbled upon one of these engines that appears to be very clean and very low mileage, so naturally, we take it apart. This engine is going to be the basis for our M73B54 OEM+ build for project Marseille, E31 850i 6-speed.
Valerio - / @valerio-andrej
Viktor - soaraperformance.com/
www.vaporblastingequipment.co...
You can support me on Patreon! - / m539restorations
T-Shirts, hoodies & mugs - m539restorations.com/
Follow me on Instagram - / m539_restorations
BMW Group Archive footage - / @kingrosearchives
Find Liqui Moly oil and additives for your car - www.liqui-moly.com/en/service...
BendPak lifts - www.bendpak.com/
Luuk, BendPak & Quickjack Europe - liftmotive.com/
Massive thanks to Radu from RT Design Studio for making new merch happen! - www.rt.md/
Email: M539restorations@gmail.com

Пікірлер: 1 200
@zedicus11
@zedicus11 Жыл бұрын
I am not even a BMW guy and watch these videos from start to finish, Great watching a craftsman do what they love.
@gplusgplus2286
@gplusgplus2286 Жыл бұрын
Me neither but these old Bimmers definitely dont suck like the new ones.
@noonakki
@noonakki Жыл бұрын
Same here, i dont like bmw:s at all but Sreten is just a maqnificent man.
@NikSMILOVAC
@NikSMILOVAC Жыл бұрын
Mw neither, im in french cars, but videos are excelent.. Sreten is also from my conutry.. and im proud of him..
@noonakki
@noonakki Жыл бұрын
@Bas bzb I'm a Mercedes guy..
@tonyeff4447
@tonyeff4447 Жыл бұрын
I was such a noob that I swapped a 206 gti for a 319 ti compact, and I didn't even know it was rear wheel drive for ages. First proper drive I thought it handled terrible because it was twichty on rear. Not long later timing chain rail or something broke, only other BMW I owned was a base model 1998 520i, cloth seats manual, that lasted about 6 months before a coil pack if I remember correctly went and I couldn't afford the repairs. I tried the poor man route but didn't work lol
@chrisp.2544
@chrisp.2544 Жыл бұрын
You are a superb mechanic Sreten, but even more you are a superior level video editor. You give us just the POP and none of the POOP. It's what makes your videos so watchable.
@SprayIgniteBoom
@SprayIgniteBoom Жыл бұрын
Indeed
@ijflskzert
@ijflskzert Жыл бұрын
Ditto
@RemmoSRednaS
@RemmoSRednaS Жыл бұрын
Fully agree with you. Always a pleasure watching your vids Sreten!
@st170restoration
@st170restoration Жыл бұрын
No BS just BMs. Brilliant work as usual 👍
@kettle_of_chris
@kettle_of_chris Жыл бұрын
Well said!
@carlwooten6771
@carlwooten6771 Жыл бұрын
I was a BMW Technician for 10 years and love these cars from these eras. Watching your videos makes me feel like a complete rookie. You are one of the best mechanics I have ever seen. Love your videos.
@JohnSmith-ws1dp
@JohnSmith-ws1dp Жыл бұрын
All “technicians” that work in STEALerships don’t have a clue what their doing
@fikriarieska8450
@fikriarieska8450 5 ай бұрын
When bangles was around they make all sort o kink bmw
@Lasertrac
@Lasertrac Жыл бұрын
Kudos to Viktor for his support. Prayers for his safety and that of his family and employees.
@promerops
@promerops Жыл бұрын
It's no exaggeration to say that Viktor is a hero.
@matthill94
@matthill94 Жыл бұрын
Feeling dread as I move my cursor to see how long is left only to find that I'm only half way through and have another amazing 20 minutes to enjoy! Such a refreshing feeling to get through some significant work with out the project being unnecessarily chopped into tiny pieces.
@oskjan1
@oskjan1 Жыл бұрын
Haha, exactly!
@jacktharippares
@jacktharippares Жыл бұрын
hahaha I also do this :D
@marcusott2973
@marcusott2973 Жыл бұрын
Same here!
@clydewhiffler2934
@clydewhiffler2934 Жыл бұрын
Same here🤣🤣
@leepicgaymer5464
@leepicgaymer5464 Жыл бұрын
And videos come in a very reasonable amount of time.
@trefod
@trefod Жыл бұрын
I can imagine the pure joy of finding a V12 engine like that in such immaculate condition. You must be thrilled.
@sociopathicnarcissist8810
@sociopathicnarcissist8810 Жыл бұрын
I would almost say "Like a Virgin", however, I have always found that a good engine that has been looked after and has gone through heat cycles is a better candidate than a brand new engine for a refurb project.
@dantheman1337
@dantheman1337 Жыл бұрын
Not immaculate since 4 of the cylinders have bad exhaust valves
@sociopathicnarcissist8810
@sociopathicnarcissist8810 Жыл бұрын
@@dantheman1337 Dan, I think that you would have to agree, however, that the sticky exhaust valves are easily fixed and it would be very hard to find a better engine of that age, with such low mileage.
@nadaesperavel
@nadaesperavel Жыл бұрын
You are the only channel I watch a video from the beginning to end without skipping once. The pacing there is phenomenal and there's not a single moment where I feel like I'd need to jump a tiny bit, simply wonderful.
@torks2339
@torks2339 Жыл бұрын
Same here. Every other channel I find myself playing with my phone but this I'm truly engaged in.
@galexymaster
@galexymaster Жыл бұрын
Your doing such a great job saving these neglected car. Thank you for everything you do.
@Apexphobic
@Apexphobic Жыл бұрын
Amazing how quick you've filled up this bigger workshop 😂. You'll be taking over the whole yard soon!
@sirremusrobinson1070
@sirremusrobinson1070 Жыл бұрын
I gotta say you're so good for people's mentality because you do what many shrinks can't do. Provide such a viewing pleasure that anyone watching your work feels at peace. By far always a pleasure watching you go! I love it and it's a constant motivator to go and do my own mechanical work on my whip! One thing you said that's 100% right is the pleasure you get when it's done and your inspections by the Government is proof of it. Keep making it happen!!!💪🏼
@richardthompson6265
@richardthompson6265 Жыл бұрын
No nothing of engineering or car maintenance, but I find what you do absolutely fascinating and addictive, your humour your enthusiasm is a joy and to know it’s a chap doing what he loves kinda makes it special, and by the way thank you .
@marveli911
@marveli911 Жыл бұрын
If you are doing OEM+ build you can coat the exhaust collectors in ceramic. There are surfaces that are blocking heat better
@LoupozE30
@LoupozE30 Жыл бұрын
I second this👍Also helps performance
@rrs_13
@rrs_13 Жыл бұрын
Actual real good suggestion! Not only helps keep the engine compartment cooler, it helps the cats doing their job.
@nilosantos4862
@nilosantos4862 Жыл бұрын
Good to know that a 5000 km a hidrogen motor was not rusty. The reason for the leak valve could be many. If solar hidrogen production plant be economic and susteinable this car could be axcelent options for Germans in general. Good look
@McMaster1500
@McMaster1500 Жыл бұрын
You got that M73 for a steal! really clean engine. I'm very excited for the first start up 😁
@HextorBane
@HextorBane Жыл бұрын
Your excitement, the happiness are contagious. It's a real pleasure to see you working on these projects and 45 minutes of video flown away too fast. Congratulations and keep up the fantastic job.
@The_Truth777
@The_Truth777 Жыл бұрын
The effort you spend editing, it alone, deserves all the praise! You’re the best
@baconmcbacon62
@baconmcbacon62 Жыл бұрын
As always, I absolutely love your videos. This is really neat - you don't usually get to see an almost factory new engine being torn apart. As a fellow IT and car guy, I'm super happy that you get to work on your passions all day!
@SalvaBarbus
@SalvaBarbus Жыл бұрын
Awesome! Two engine tear-downs for the price of one! Also, your excitement is understandable and very contagious, hahaha. This is going to be one hell of a ride. Imagine if you could've done the impossiblest (yes, it's now a word) task of rebuilding this engine to run on hydrogen, lol. Regarding the new camera, I'm pretty much sold on this one. Video quality looks pretty on-par with the old 4k one, and there aren't any strange audio issues, so that's already an Improvement. Also, well, I'm a massive Sony fanboy, so I can't quite be neutral on this, but I'm glad this one's working for you! Autofocus can be a little bit hard to manage, I guess, but practice makes perfect, don't worry too much about it.
@machtschnell7452
@machtschnell7452 Жыл бұрын
Most impossible is the correct superlative.
@SalvaBarbus
@SalvaBarbus Жыл бұрын
@@machtschnell7452 I know, I know. I was just building on the general Internet joke of creating words that you know are wrong (especially with comparatives and superlatives) just for fun. That's why you add the "(yeah, that's now a word)" thing between parentheses.
@carenthusiast746
@carenthusiast746 Жыл бұрын
I thank you once again for uploading a such well filmed and well edited video and of course entertaining my afternoon with Project Marseille. Much love from me :)
@Mtown_moop
@Mtown_moop Жыл бұрын
Ive honestly gained a SIGNIFIGANT amount of BMW knowledge + facts from this channel ..... which I regurgitate to my pals as if i knew .... Thank you guys for educating me ... and my friends lol
@crossplanerider3559
@crossplanerider3559 Жыл бұрын
H2 ICE are very interresting at the moment now in the R & D field. I worked on it during my master degree in the laboratory and now in my job for combustion research. It is a great engineering area, where is much to discover. But a NA H2 ICE is not barley impressive, since the volumetric energy amount of H2-air gas mixture is poor. Yet it burns so fast througth and leaves alsmost no residuals (as we see on your V12 here) in the chamber. And one can run it extremly lean which means nearly no NOx emissions. With the correct charging system you can reach same values for torque and power as a comparable diesel engine. Great disassambling again Sreten, perfect!
@HP-vh3ez
@HP-vh3ez Жыл бұрын
Dobra robota 💪🇵🇱!!!
@marcus330d
@marcus330d Жыл бұрын
Kiełbasa z Polski :)
@peterers3
@peterers3 Жыл бұрын
gute Arbeit!
@RPDBY
@RPDBY Жыл бұрын
ja pierdole
@SzwarcuKX5
@SzwarcuKX5 Жыл бұрын
polska gurom
@FromageBZN
@FromageBZN Жыл бұрын
🇵🇱🇵🇱🗣️‼️‼️
@qt07428
@qt07428 Жыл бұрын
I was working in Munich near Hauferlandstrasse on NG4 engine planning when these cars were out and about. They converted 1 pump to hydrogen at the Shell garage on Leopoldstr.
@bountyhuntermk2520
@bountyhuntermk2520 Жыл бұрын
I don’t even own a spanner and I watch these videos religiously, I found the channel when it had 57k subscribers it is amazing
@RafaelNettodaSilva
@RafaelNettodaSilva Жыл бұрын
Os melhores vídeos sobre BMW do mundo estão aqui. Parabéns pelo excelente trabalho! Abraço do Brasil.
@alfredotovar8984
@alfredotovar8984 Жыл бұрын
Sreten, you’re the man! 😎 I love BMW’s and seeing you put all the hard work that you do in each build is incredible, I’m buying an E46 M3 this year hopefully, depending on the market, can’t wait to see the conclusion to this SWEET 8-series! Saludos from Los Angeles ☀️👋🏼
@DashDrones
@DashDrones Жыл бұрын
Cannot wait to see how this hydrogen prototype V12 performs. So exciting 😎
@Cheradanine
@Cheradanine Жыл бұрын
It was a pile of crap. Heavy and limited range. Using liquid H2 was a crazy idea. As a concept, using H2 for personal transportation is a non-starter. Better to rip that overly complicated boat anchor of an engine out and stick an electric motor in there.
@dantheman1337
@dantheman1337 Жыл бұрын
He's not using it for that - no hydrogen going to be performing anywhere
@koutz1987
@koutz1987 Жыл бұрын
This is why I love KZbin. Real talented people sharing something like this for free!
@iantyler4045
@iantyler4045 Жыл бұрын
Your enthusiasm is infectious. Watching this disassembly just flew by and I am so looking forward to the reassembly process. That motor is going to sing.
@manualgarage
@manualgarage Жыл бұрын
Great attention to detail in all your builds, the hard work pays off well done👍
@chir0pter
@chir0pter Жыл бұрын
I really like the idea of porting & polishing the heads, but I also don't want to wait months for it...hopefully the second shop can work something out and put this project at the head of the line!
@Gabson9
@Gabson9 Жыл бұрын
26:00 That is the best Milwaukee non-ad ad i have ever seen.
@MrSchattka
@MrSchattka Жыл бұрын
I always look forward to watching a new M539 Restoration video. Glad to be part of your journey.
@magnifico0186
@magnifico0186 Жыл бұрын
Prvo lajk pa se onda gleda ova profesionalnost i posvecenost sa uzivanjem. Bravo ! Kapa dole !
@EliteRock
@EliteRock Жыл бұрын
two or three episodes of content in one - awesome as ever, and much appreciated. And yes, this is as (vicariously) exciting to us as for yourself. That engine is just stunning - what a result! - I suspect a few people are going to be doing double-takes on the autobahn when it gets its first blast after break-in.
@Guilherme9665
@Guilherme9665 Жыл бұрын
This, my friend, is waaaay better than Netflix! Greetings from Brazil!
@itsjustme9318
@itsjustme9318 Жыл бұрын
It warms my heart to see you like a kid on Christmas morning when you are playing with that engine. You got one hell of a deal on that pristine engine!!!ENJOY!!!!!!!!
@danw1955
@danw1955 Жыл бұрын
Great teardown compilation! It's fun just watching you do this after wrenching on cars, bikes, and trucks since the 1970's. Looking forward to the build up for installation into the 850i. New subscriber here. Keep up the great work!😄👍
@devlop30
@devlop30 Жыл бұрын
Another great project. Please never stop what you are doing.
@o0julek0o
@o0julek0o Жыл бұрын
You do on KZbin what Ed China needed a whole TV show for. Now he can’t even come close to you. Thank you dude.
@user-iv5wo1gj2v
@user-iv5wo1gj2v Жыл бұрын
Wow that exhaust manifold is a piece of art!!!! And especially when I heard that it is made in Ukraine, that makes my skin with goosebumps, I am so proud of our people's!!!!!👍👍👍👍👍👍👍 Greetings from Ukraine!!!!
@LovelessAndroid
@LovelessAndroid Жыл бұрын
Slava Ukrani!
@dantheman1337
@dantheman1337 Жыл бұрын
@@LovelessAndroid 120 000 dead, approx 8 Ukrainians killed for every 1 Russian, there's no glory there, just being used as cannon fodder to make money for arms companies and corrupt politicians.
@charliecoco2115
@charliecoco2115 Жыл бұрын
Boring propaganda!
@user-iv5wo1gj2v
@user-iv5wo1gj2v Жыл бұрын
@@charliecoco2115 What exactly do you mean?
@bowenflob8036
@bowenflob8036 Жыл бұрын
@@user-iv5wo1gj2v Russian troll, ignore him
@HCH9990
@HCH9990 Жыл бұрын
That 45 minutes went by so fast! Fantastic as always! 😎
@marknelson8724
@marknelson8724 Жыл бұрын
We used to have a 6-cylinder motor on the farm that ran on propane. It was always super clean. Changing the oil was eye opening since the oil barely showed signs of use. The spark plugs were always clean. Propane was so much better than that filthy gasoline. I was worried and confused for a moment when you said "hard pass" as around here that means "no good, no way, no how, I'm walking away now" but then I realized you meant that it had passed with flying colors as it was perfect.
@FishFind3000
@FishFind3000 Жыл бұрын
Yea propane burns cleaner. I’d do a oil analysis and see if it needs to be changed. Might be able to get more hours on it.
@Tiagotaf
@Tiagotaf Жыл бұрын
I'm a JDM guy, but seeing you work on these cars is a sight to behold. Amazing content. You rock!
@RothBeyondTheGrave
@RothBeyondTheGrave Жыл бұрын
Is it strange I feel a certain exclusivity when I catch one of your uploads early enough that it hasn't reached 1k views yet, knowing that it will soon be in the hundreds of thousands?! This channel is pure inspiration & pure Gold! Greetings from the Swiss cheese roads of NJ!
@maxmaijor
@maxmaijor Жыл бұрын
Sreten, good job, great approach to engine repair. I'm a motorist myself... and your videos are a thrill for my eyes. Do not delay the continuation of this project. I wish you development and constructive creation.
@przemekwal
@przemekwal Жыл бұрын
thanks for uploading! Fortunately I'm not sleeping yet :)
@FatNFurious
@FatNFurious Жыл бұрын
26 minutes in and I was getting worried that I wouldn't see any vapour blasting! Phew, I knew Sreten would have my back though. Parts cleaning porn courtesy of Vixen Surface Treatments as always. 🙂
@thomascarlsson7722
@thomascarlsson7722 Жыл бұрын
BMW E38 V12 Hydrogen probably the most genius project ever in BMW history. So good looking E38 production line.
@miguelnascimento4647
@miguelnascimento4647 Жыл бұрын
I'm not a BMW lover, but your videos are,.... No words.. Thanks, and.. Keep going..
@bluej511
@bluej511 Жыл бұрын
So cool seeing a prototype engine back to life. I hope project Marseille doesn't have too much rust on her. Should look and sound absolutely amazing. Maybe one day we'll see Sreten do an electric bmw conversion just for shits and giggles lol. Cheers my friend. You can try lapping the valves, if that doesn't work you can just replace the valve seat, it would have to go to a shop to get cut though so praying just lapping em works. Should if the rust hasn't pitted the seat.
@bluej511
@bluej511 Жыл бұрын
These guys might be able to help, they do incredible work. youtube.com/@JAMSIONLINE
@nathanpen2
@nathanpen2 Жыл бұрын
This video series is something I’ve looking forward to for months! So excited for the journey and end result. Just curious, on the m73, how did/could the rod bearings get damaged on such a low mile engine while every other neighboring component like the crankshaft and piston components were pristine?
@delijasasevera2212
@delijasasevera2212 Жыл бұрын
Ćao, Sretene legendo. Uživanje je gledati ove videe.
@urbanjungle9600
@urbanjungle9600 Жыл бұрын
I’m no mechanic, have zero experience fixing cars but I love your content. Your attention to detail and quality focus as well as your sense of humour make this such an enjoyable channel. Thanks for entertaining us.
@EvilBaggOBolts
@EvilBaggOBolts Жыл бұрын
Loved the episode, and stoked you got a rare new mintt engine for the E31. Hence, why did you have to change the oil pump back to the old one and the uneven wear on the rod bearings within 5k km needs little more investigating. Perhaps measure the weights of the pistons and rods see if they are all within tolerances since you're going to be removing them anyway
@M539Restorations
@M539Restorations Жыл бұрын
Thank you! I have to use M70 (old) oil pump because I also need to use M70 oil pans. A bit of wear on the rod bearings is somewhat expected on a test engine, probably revved high. The weight of the pistons and rods can't change unless they were damaged nor does that affect bearing wear. Oil lubrication and clearance do.
@762851
@762851 Жыл бұрын
Glory to Ukraine 🇺🇦!
@buzduganrazvan1681
@buzduganrazvan1681 Жыл бұрын
I was born 43 years ago, today was my birthday, I enjoy every moment of your pasion.Thank you for the clip,2 x v12😎😎😎
@VixenSurfaceTreatments
@VixenSurfaceTreatments Жыл бұрын
Another great video, Sreten! We love what you do with the Aquablast and on your channel- keep up the fab work! 👏🏻
@gyrogearloose1345
@gyrogearloose1345 Жыл бұрын
Wow! There is something magical about watching this man work - he knows what he is doing and gets on with it! Thanks for sharing man!
@macthemec
@macthemec Жыл бұрын
That last part hit hard, finally pursuing a career as a mechanic and its been 9hr days minimum, often times no proper lunch break, but it feels like nothing compared to 6hrs at my old job
@kawasakiwhiptwo5821
@kawasakiwhiptwo5821 Жыл бұрын
The longer the video, the more excited I get. Great video Sreten and I'm glad the engine is in such good condition. This series is going to be awesome. ✌️❤️
@Christinacanady-ur9eb
@Christinacanady-ur9eb Жыл бұрын
I only wish I could take a lap in this beauty once she's finished! Great car. Great technician. Great content! Thanks SO much for the video.
@Antmattroman
@Antmattroman Жыл бұрын
not even five minutes in and just want to say thank you for including the factory videos. what a cool thing to learn about
@turbo5774
@turbo5774 Жыл бұрын
I can’t get over how flawless those headers are! They’re works of automotive art
@Frankestein01nl
@Frankestein01nl Жыл бұрын
Shreten wagging his tail out of happyness over a disassembled engine: true love for the sport of mechanicken. Good and heartwarming to watch. Keep on enjoy yourself!!! We love ya!
@ChrisRoundAU
@ChrisRoundAU Жыл бұрын
That bolt stack from the oil pan was a thing of beauty 😁
@a_person7036
@a_person7036 Жыл бұрын
i just love when you say "Cooming up" it always in the same tone and i repeat it with your video, you such a good man, cheers.
@Daniello599
@Daniello599 Жыл бұрын
I enjoy watching your videos... Thank you so much, please continue this way. 👍
@elboogie7248
@elboogie7248 Жыл бұрын
I love everything about this channel and his content. I'm a big bmw guy. I wish I could get my hands on one of them 90's 850i. I love that car so much! 😍
@simeonatanasov8332
@simeonatanasov8332 Жыл бұрын
You are the best!!! There is no one like you on KZbin.
@MaximeSourbeer
@MaximeSourbeer Жыл бұрын
Your videos always hit the mark for me! It's so great to watch your dedication and how you work around any obstacle. I find it very inspiring to do more car stuff on my own, thanks Sreten!
@klaspeppar5619
@klaspeppar5619 Жыл бұрын
Pretty fun that they made an “environmentally friendly” V12, pretty interesting choice of engine to choose as a base.
@stevebez9556
@stevebez9556 Жыл бұрын
So nice to see your joy & enthusiasm for this type of work. One day when I grow up (I am 54 years old!) this is what I would love to do! FWIW I've already contacted Viktor re some custom headers ;)
@tothethreshold.9965
@tothethreshold.9965 Жыл бұрын
Nice project :). Agree on the M18 impact gun. Genuinely amazing tool, pulled 1 inch lug nuts off my friends truck even when his ingersol rand air impact could not free them. That thing has got me out of so many binds it has paid for its self ten times over.
@johanung
@johanung Жыл бұрын
Man, I love watching your videos. Keep doing what you’re doing!
@denniscarreno5882
@denniscarreno5882 Жыл бұрын
I’m glad you have the patience to do this labor intense job…..you are good Streten….. congratulations
@zombehkilla51
@zombehkilla51 Жыл бұрын
This literally the only internet content creator I have ever given money to (Patreon), best automotive repair/BMW channel on KZbin imo
@legion1791
@legion1791 Жыл бұрын
The passion is so real this is so much what I will do when I will be retired
@chrisbradley1192
@chrisbradley1192 Жыл бұрын
We're all as excited as you are Sreten. Thanks for taking us along on the ride.
@vincentbunk9405
@vincentbunk9405 Жыл бұрын
I was annoyed about my N52 engine running rough. Still not fixed after replacing: coils and spark plugs. Now ordered new Vanos solenoids. But then this wrenchfest popped up in my landing page. Thanks for all the amazing content the past years. You inspired me to work on my own BMW aswell! I always look forward to watching your videos.
@SeventyRS
@SeventyRS Жыл бұрын
Fantastic video! Watching you do this makes me feel much more confident in doing my own work on my e30. I'm not new to mechanical work, just BMW. Thanks for the education and entertainment! Looking forward to more.
@edgy1rocks
@edgy1rocks Жыл бұрын
Wow. I look forward to your videos the same way I used to look forward to Christmas 60+ years ago! Your photography is excellent!
@TinusScheffer
@TinusScheffer Жыл бұрын
Hai Sreten, it's a pleasure to see you I love what you do also because I'm a technician and I love BMW, my first was a 1602 ,then 2002tii, e21 316, e30 318, e36 318, e46 320, e46 320 LCI, e90 320, e91 318, and now an f31 328. Keep it up love it
@mattevans72
@mattevans72 Жыл бұрын
Sreten, every time your videos come out, I sit down, pour myself a Weissbier and chill. Such good content from a master of BMW's! Please keep them coming.
@maxuelcarminatti9234
@maxuelcarminatti9234 Жыл бұрын
i search "bmw restoration" and his channel is the first thing that pops up, great job man!
@GentryBa1
@GentryBa1 Жыл бұрын
Back in the day BMW visited our school (Berufsschule Regensburg) and I could have a closer look on the 750hL- I saw it "LIVE", so to say :) Amazing, that one of these engines found the way to you, Sreten! Maybe it is exactly the engine I looked at back in 2000/2001(?). Time flies... crazy.
@andrijacrncic1111
@andrijacrncic1111 Жыл бұрын
Svaka čast Sretene! Da bar ima više takvih kao ti. Pozdrav iz Zagreba
@stephencurry8552
@stephencurry8552 Жыл бұрын
Yes, very excited to watch you work on this gorgeous machine. One off the most visually stunning cars ever designed. And a V-12. Mon dieu!
@biggierat6246
@biggierat6246 Жыл бұрын
What a nice looking motor, those V12s just look STRONG! ! !
@9susidegink9
@9susidegink9 Жыл бұрын
Just like you've enjoyed every minute of tearing down these engines, I've enjoyed every second of watching this series! Favourite car channel by far, keep it up.
@JoeWolsing
@JoeWolsing Жыл бұрын
Your exitement (even if things are difficult) is one of the really attractive aspects of your channel. Besides the good Videos and the proper work (always in mind, that you are not a mechanic in the first place, but a real enthusiastic gearhead doing stuff very systematically). Now we out here in the www are all waiting for the continuation of this project! Go for it man!
@joelharris3073
@joelharris3073 Жыл бұрын
I’d never remotely consider a BMW of any age and never miss a video. Love this channel!
@AllTorque
@AllTorque Жыл бұрын
Through family illness and various dramas I have missed many episodes and looking forward to catching up after watching this one. it has been around 5 months since I uploaded to You Tube and I feel i need some motivation to get on with my projects and create some more videos .. what better way to do that than by watching these!!! Awesome as always.
@bmw-wagon
@bmw-wagon Жыл бұрын
Can't wait to watch future videos on this project! Working on a e28 and these videos are truly an inspiration for me.
@allaboutcarsandmore69
@allaboutcarsandmore69 Жыл бұрын
Simply, AMAZING!!! Love your fantastic videos. Keep up the amazing work you do in Germany and keep us all entertained. THANK YOU Sir!!!
@marksantos2276
@marksantos2276 Жыл бұрын
Sreten you are the MAN. I absolutely LOVE your channel
@CatamaxPor
@CatamaxPor Жыл бұрын
wonderful , loved every minute of it !
@johndee7478
@johndee7478 Жыл бұрын
I dont have a shop ,but really wanted teh Aqua Blast. UNREAL machine. Love it.
@augustoalves1482
@augustoalves1482 Жыл бұрын
Beautiful work, it truly is a pleasure to watch you work, can't wait to see more, best regards from brazil
@BkSMedia
@BkSMedia Жыл бұрын
Just one man, his workshop and 2 glorious V12 engines.... the stuff of dreams!
@ampsandoctane
@ampsandoctane Жыл бұрын
I had no idea they trialled the hydrogen engine!!! Thanx for the education! Super interesting project! Always loved the 850!!!!
V12 Piston Dance - BMW E31 850i - Project Marseille: Part 7
50:05
M539 Restorations
Рет қаралды 437 М.
We've Bought A Mitsubishi Lancer Evo VIII FQ-300!
15:15
DRIVETRIBE
Рет қаралды 129 М.
ЗАЧЕМ ОНА ЭТО СДЕЛАЛА😂😂😂
00:14
Chapitosiki
Рет қаралды 16 МЛН
skibidi toilet 72 (part 1)
03:06
DaFuq!?Boom!
Рет қаралды 25 МЛН
Sigma Girl Love #sigmagirl #funny #comedyvideo
00:25
CRAZY GREAPA
Рет қаралды 3,8 МЛН
2003 BMW M5 (E39) Touring/Wagon: Features and Walk Around
7:09
The BMW Wagon Guy — E39, E46, E91
Рет қаралды 75 М.
2 Reasons Why the E36 is an ALMOST PERFECT Project Car
18:33
Donut
Рет қаралды 2,1 МЛН
Look Inside a 187k mile Ferrari Engine - Maserati Quattroporte GTS 530hp V8
49:29
The BMW 8 Series Is A Flawed Genius! (1998 E31 840Ci Road Test)
6:01
F1 Sound in a 4-Door Super Sedan - BMW E60 M5 + New 2-Post Lift
28:46
M539 Restorations
Рет қаралды 338 М.
How Bad Is OEM Motor Oil? Honda vs Toyota vs ACDelco?
15:15
Project Farm
Рет қаралды 739 М.
Что быстрее 1 или 2 мотора?
0:27
Сергей Король ТСЦ ФЛАГМАН
Рет қаралды 1,4 МЛН
Test of explosion proof tires under long nails
0:11
Crafts people
Рет қаралды 7 МЛН
😱 Система удержания велосипеда?
0:39
Тот самый Денчик
Рет қаралды 3 МЛН