1998-2002 S10 Blazer Sonoma | Double DIN Install | Metra 95-3027 | Alpine ILX-W650

[@user-fm6ny3uo2b]

Did not know anyone made a double DIN adapter for the S-10. Now I do, THANK YOU FOR THE VIDEO !

[@myriadtechrepair1191]

I would have been surprised to learn there WASNT a double din kit. I feel like it's a rite of passage for a good chevy

[@warrenwallace8383]

The trouble I'm running into is my stock bezel has a 4" opening and it broke up from age. The only afternoon replacement is single din with a 3.25 +/- radio opening. I'm hoping to order a replacement and the kit to cover the cutout 🤞

[@304cortez85]

About to go through this process with my 2001 blazer. It’s gonna be a headache I can tell but the end result will definitely be rewarding

[@treenutz360]

same brother how did yours turn out

[@herbage2429]

@@treenutz360same brother how did yours turn out

[@ryanstarkey6641]

How’s it turn out. Doing the same soon

[@304cortez85]

@@ryanstarkey6641 it actually went pretty good looked like it belonged there once I was done. Didn’t take more than like a hour hour and a half to do.

[@evankennedy5098]

❤

[@rusty2381]

Nan, thank you for posting this. I did not know this kit was out there now I can't wait to get it.

[@Bwk91291]

I needed a video like this so bad and I found it. You rock man, thank you!

[@bobbydc33]

I have an 02 s10 blazer and watching this gives me some hope but im nervous as hell thinking about cutting out that piece in the back

[@myriadtechrepair1191]

Not sure if you've installed one or not yet, but you could always go rip the part from the junkyard and keep your un-modded one as spare if it really bothers you.

[@oTJack3D]

Just did this on my 00 ZR2 it was an easy install ( also grabbed the w650 and plan on grabbing the small amp that clips to the back of it here shortly ) thanks to your video. xD

[@timetotalk8275]

link to the conversion kit for the double din

[@mossman381]

Would this radio have fit without cutting behind the dash?

[@DanielPace92]

I do think it may have fit without cutting the inside since it was a media receiver. I think I cut it just to get extra room, or maybe just the way the heatsink was on the radio.

[@mossman381]

@@DanielPace92 Did you like the radio? Can you get apps and maps on this radio?

[@DanielPace92]

​@@mossman381 It was okay. Pretty slow interface and the RCA outputs were pretty low voltage so my subs never worked right. The only maps you could get would be from Android Auto/Car Play. I pretty much bought one of the cheapest radios with Android Auto at the time since that's what I mostly use. I learned my lesson to never get any radio other than Pioneer since I've almost never had issues with them.

[@marvinlemmons522]

I know this video is several years old, but after install have you had issues with the calls only coming through the right speakers. I own a 1999 S10 as well. My music plays fine through all speakers. No amp just hooked up to the unit.

[@Jaxin-mk6tz]

It’s supposed to do that I’m pretty sure

[@cre8tivegarage157]

Great install just did the same install on my Miata 🥂 great content enjoyed the video

[@7094spanky]

I wonder if there is a big difference between a 2002 and 2004 bezel. I'd love to use that Metra kit for mine.

[@joshualaird5303]

Same!!

[@joshualaird5303]

Did you make it work?

[@7094spanky]

I am having to order a new bezel anyway and I am waiting for that to arrive before I try it. Ordered the Metra unit through Amazon so if it does not work I can easily return it. I will let you know in about a week or so. The bezel is on a slow boat from China.@@joshualaird5303

[@mikedouma8526]

great video brother. Thank you

[@RobertRichardson-o5n]

I think it’s really cool. How are you guys put the times of what you’re doing on the starting of the video. 👍🏻👍🏻

[@TheJcmcd]

Great video very detailed

[@52BuickBoi]

May I suggest you upgrading to the alpine INE-970HD. It is a very good one.

[@photondebuger45]

Is that like face part usable for all like double din radio or is there a different one for every double din radio i dont under that actually at all like what to do. Have you changed it like you mentioned in the video and possibly reused the dash kit for your pioneer radio?

[@iansmith3975]

Did you ever put a camera on it? If so where did you mount them?

[@danpoczynek]

the snap in black trim for the radio and HVAC controls where can I get this

[@DanielPace92]

it's a Metra 95-3027, you can get it pretty much anywhere.

[@bassaholic9182]

Is that the theme song to Kentucky brew reviews? Haha

[@mikeh1348]

what size tires did you have on the truck in this video

[@winslaramh7461]

Ese marco en color negro donde lo compro?

[@warrenwallace8383]

Is that a single din bezel. My 03 S-10 came stock with the double din radio and the bezel broke in several places and is beyond repair. The only issue is that the only replacement I can find is for the single din factory/aftermarket radios. Can I buy one and cut/install the single din bezel and use the kit you're using to cover the cutout? What kit did you use? I'd really appreciate the help.

[@VancouverMoon1]

There seems to be some double din bezels on Ebay from China

[@eliksni_gaming8790]

Might be a stupid question but where do I find the wiring harness for this conversation?

[@wyattjyoung853]

Found one at Walmart

[@Bloo_Eyed]

I have a Chevy 1998 s10 and was wondering if this would work with that too?

[@hayden9102]

Yes it will

[@areiynnechannels8042]

So I only have one green connected, and only have one speaker putting sound out. I got the truck like this,(99 blazer) and have been wondering if i should replace the speakers or if it’s a wiring thing. Any help?

[@areiynnechannels8042]

i dunno if you’ve got it fixed, but i had the same issue & had to replace alllll door speakers

[@areiynnechannels8042]

holy sht i just realized this was my old comment 😂😂😂

[@STELLAR_QRU]

@@areiynnechannels8042 LMAO and I was about to ask howd you fix it, and it was probably just missing speaker wires from the factory and aftermarket harness

[@areiynnechannels8042]

@RegSoFresh no all of the factory door speakers were blown, then i rewired the face and all was gravy man

[@animesama9533]

Where did you buy the radio mount from ?

[@DanielPace92]

Sonic Electronix, but you should be able to buy it about anywhere since it has been out 3 to 4 years at this point.

[@lancekfishing7502]

Hey can you upload another vid on the Sonoma

[@andyschoen7126]

Would I be able to put that radio inside my 03 sls crew cab Sonoma? Cause mines a factory double din radio

[@DanielPace92]

Yes, if you have a factory 2DIN radio, all you need in the 2DIN adapters for the 03+ S10/Sonoma.

[@andyschoen7126]

@@DanielPace92 awesome, thank you brother

[@ashleybissonette8780]

I have and 03 sonoma and need to replace the ashtray assm. do i have to take off the dash as you do with the stero or can i just go from under the dash i cant find in vids on this ?

[@DanielPace92]

I haven't taken out the ashtray assembly so I don't know. I would assume the lower piece would need to come off though.

[@gregturner9725]

How do you run the rca sub cable and amp wire from the radio to the amp?

[@DanielPace92]

I ran the power wire from the batter, through the driver side of the firewall, down under the sill panel to the back wall to the amp. The RCA's & remote wire I ran under the dash, down under the passenger sill panel to the amp.

[@celsojunior9852]

how do i get this frame, because here in brazil i couldn't find it?

[@andrewgibson9520]

Is that a tuner ?

[@alexherrera4078]

Would this video be the same for installing it in a Chevy s10 2001?

[@DanielPace92]

Yes, the exact same.

[@jonathonnewport336]

Does the frame cover piece come with the radio or separate

[@DanielPace92]

The cover piece that goes around the radio and HVAC controls comes with a install kit.

[@jonathonnewport336]

Daniel Pace okay thank you

[@lindomarpereiradasilva767]

De qual carro e essa moldura preta ?

[@jeffreyam2002]

Would this work with a din and a half radio?

[@DanielPace92]

A DIN.5 is the factory radio size, if you want to install a DIN.5 there is no need to install this 2 DIN kit. Just find a dash kit for a DIN.5 (if you can even find them anymore) and install that. This kit converts the factory DIN.5 to a 2 DIN for 2 DIN radios.

[@kennethblackburn8756]

I have this kit installed and absolutely hate it. Ive got a spare double din bezel I'm installing. Id rather finagle some brackets than have that ugly Metra bezel sticking out. But hey, not my truck and everybody likes different things. So that's OK. Hope this video helped someone.

[@sidney_gamer01]

Boa noite tdb teria um site que eu consigo comprar essa moldura preta

[@celsojunior9852]

Very Good.

[@blakehumes904]

Radio dimensions it needs?

[@DanielPace92]

Any double DIN radio will fit but a meda only radio that is short will be better due to dash space.

[@timsheehan9400]

What’s the bypass for?

[@DanielPace92]

The bypass lest you do things while driving that would normally be blocked without the e-brake on.

[@fuzzyboy98]

Did your wire harness have a remote turn on

[@DanielPace92]

yes it did

[@celsojunior9852]

Please my help...

[@robertgoforth5468]

Not much

[@erikencinas1964]

Oh No! I have a 2000 Blazer. I did my conversion 5 years ago with a proper double-din from an Oldsmobile Bravada. That kit looks atrocious. The finish is flat, smooth, and just black. Awful!

[@SharpEdgeCutleryStore]

This guy definitely shouldn't be doing car audio if he doesn't even know to disconnect the negative battery what a joke

[@DanielPace92]

The joke is, the only reason you disconnect the negative terminal is to take liability away from the manufacturer if something goes wrong. I've never discontinued a battery for anything automotive related except for starter and alternator replacement and I've worked on cars professionally for over 6 years.

[@mateococo4931]

What size double din?