Restoration Old Alarm Clock | I RESTORED this RUSTY ALARM CLOCK from 1955

This video is about the restoration of an old German watch, circa 1950. This watch was a gift from a subscriber. To restore the watch I had to use the following tools: sandblasting machine, lathe, fiber optic laser, ultrasonic bath, painting was done under varnish.
The result of the restoration was excellent.
You can rate it by leaving your comment.
#restorationvideo #restoration #PSVRestoration

[@forevereuropa]

Ich muss Sie wirklich loben! 👍 Sie haben wirklich eine gute Restaurierung gemacht! Falls sie es noch nicht wussten der Wecker ist von der Marke Junghans. Hier noch ein paar tipps wenn sie nochmal solch einen Wecker Restaurieren: Die 2 Zugfedern hätten sie wechseln sollen, denn durch das Jahrzehnte lange aufziehen der Uhr ist es immer so das die Zugfedern schlaff werden und an Kraft und spannung verlieren. Dadurch läuft die Uhr meist keine 24h oder kann öfters mal am Tag stehen bleiben. Und sonst hätten sie die Unruh der Uhr etwas besser beim Einbau justieren müssen, weil der Wecker etwas ungleichmäßig tickt. Aber sonst bin ich echt überrascht was die Restauration anging ! Wirklich großartig, vom Gehäuse und Zifferblatt bin ich am meisten erstaunt! 💪 Der Wecker sieht wirklich wie neu aus.

[@justinanderson4315]

That laser etching is awesome to watch.

[@wotanasgard7560]

Top Fähigkeiten Sehr gute Handwerkskunst👍👌👌👌👌

[@PSVRestoration]

Thanks

[@raziel3726]

Amazing Craftsmanship and Restoration 👍🏻👍🏽👍🇬🇧🇬🇧

[@PSVRestoration]

Thanks

[@hrdecisions]

Thanks for the laser show with sound effects!

[@SeanRedux]

Bravo! Fun video but would love to see a long form cut that shows restoration of the springs as well 👏

[@PhoenixDown99999]

I love the use of lasers. ❤

[@LOrealHardly]

Who else smiled when that second hand started moving/ticking...?

[@ericball6000]

nice work!!, and no plastic parts.

[@PSVRestoration]

Thanks

[@dalebechtel8904]

Simply amazing!!!

[@PSVRestoration]

Thanks

[@PeterPan-id3yy]

That sound for the pattern designer gives me the creeps😮😵😲

[@colmreilly9127]

Very good resterration from Ireland.

[@PSVRestoration]

Thanks

[@robertmanley7556]

I enjoyed your work a lot so you have earned a new Subscriber !! 👍👍👍I am off to watch more of your video's.

[@PSVRestoration]

Thanks

[@andrzejporeda7281]

Super jest tak klekotka odrestaurowana Pozdrawiam serdecznie. 👍👍👍👍👍👍

[@ulmanito5237]

very well done. I live in the city where this alarm clock was made.Unfortunately the Junghans sign is now gone

[@francoisbouchard602]

Nice job sir Nice Clock Nice show 😃👏👏👏👏👍👍👍👍👍

[@PSVRestoration]

Thanks

[@ruslancik808]

Помню когда был маленький, тоже разобрал такие часы. А поставить всё обратно, оказалось что запчасти было много лишнего 😂.

[@zmaxx21]

Nice job! Love the red!

[@PSVRestoration]

Thanks

[@paulolohn9109]

MEUS PARABENS SOU DO BRASIL😊😊😊😊😊😊😊

[@PSVRestoration]

Thanks

[@The_Shiny_Red_Dingus_of_Mingus]

For anyone who is interested in the breakdown of a clock's internal parts, this is a fantastic video. It's also great for showing different ways of dealing with the clean-up, and rust removal. Beyond that... there is so much wrong with this, that I can't describe how much I hated this video. For a start, you NEVER use a blowtorch to remove the Canon pinion!

[@PeterPan-id3yy]

Good restoration as always👍👌😁🌟

[@PSVRestoration]

Thanks

[@perha45]

The second bell just magically appeared?

[@solidsnakesimulation666]

It's staged.

[@MOHAMED-qh3px]

Great job you are the artiste 👌👌

[@PSVRestoration]

Thanks

[@cecilgore495]

You did a fantastic job with this project

[@RestorationsNNT]

I Also Do Restoration Of Old Rusty Machinery. I See You Do Very Well

[@PSVRestoration]

Thanks

[@robinjohnson9915]

Great job! I love your channel! ❤

[@PSVRestoration]

Thank you so much!

[@Tiaguits2023]

Great job bro!

[@PSVRestoration]

Thanks

[@mohsinsayedali4330]

@21 the clock seems very sad being dismantled but must be happy at the end....😂😂😂

[@wanderingjew26]

بسیار جالب و دیدنی بود

[@PSVRestoration]

Thanks

[@martino0072]

Search youtube and you can find how to make objects looks old and rusty😂 Even plastic is rusty.but this video i like to see the restoration good job

[@oneshotme]

It looks great and you did a wonderful job restoring it as well!!!! I enjoyed your video so I gave it a Thumbs Up I would have extra parts if I tried to do that HAHAHAHAHA

[@RestoreZone-KTV]

Good job) I used to wake up for school, I hated this sound))

[@solidsnakesimulation666]

Learn to use () correctly imbecile.

[@indiaview9414]

Moral of the story is a normal house sitting man could not repair such table clock.. Because we dont have mill right machines, ultrasonication, spray painting, Laser krafting, micro drilling.. Etc etc😒😒😒

[@KaquolMeliReno]

This makes me sad because I don’t have my old clock like that! I honestly dislike today’s battery clocks! I wish I had my old clock still.

[@mrglowhite2365]

Do the arrows by any chance glow at the savo without a light source? Such old watches are extremely dangerous. Perhaps there is a permanent radium-based light mass. Considering that the mass is old, it crumbles and falls off, radioactive dust is obtained. You would check with a dosimeter just in case.

[@mahendradev2756]

I PURCHASED ONE IN 1954 FROM CHANDNI CHOWK AS A STUDENT IT WAS MADE IN GERMANY FROM USA

[@AdrianaLima-r1j]

Wow you are a pro good job 👍 a satisfying video

[@PSVRestoration]

Thanks

[@Imback17]

like colleague, I also create, I make car models from cardboard

[@evgenijkern]

❤😊😮🎉🎉🎉😮😮😮😮

[@AdnanKhan-wl6ym]

Binance par video bana da sir❤

[@gustavouchida1]

Why sanding, rust removal or nickel coating when you can just sand blast it, cold blue it, or paint over the nearly unworked metal? Life's too short and you only live once! Seriously, truth be told, watching My Mechanics has forever spoiled me. This video was a hard watch, but eventually, that beautiful piece looks good after assembly. And he's the one restoring it, while we're merely watcihing. Good luck with your future endeavors, mister.

[@user-hu8vz8sk5v]

Хелоу! Настоящий реставратор никогда не будет откручивать ржавые болты, гайки и прочее без WD-40.

[@PSVRestoration]

Если они хорошо выкручиваются все ровно надо wd брызгать)

[@chaiwatpotichanid]

🥰🤝🥰

[@TechnologyMachine-56]

Hi guys

[@rbreceda7790]

Was this clock in the titanic?

[@mojoblues66]

Good job overall, but the new clock-face has nothing in common with the original. Disappointing.

[@MrChristopherMolloy]

Not exactly sure how a clock gets that much internal corrosion? 🤔

[@PSVRestoration]

I don't understand either, they were given to me in such a state.

[@samuelfellows6923]

Faked? 😠

[@jonvincentmusic]

@@samuelfellows6923 may be staged, but definitely not fake. There is a difference. Staged is still annoying though he has genuinely restored it.

[@paulsheffield888]

Shouldn't it have been gold or brass in color?

[@BryanMiller-kb5pe]

Being exposed to salt water will do it

[@mariaadelaidemelo1810]

Msurhio haleng cuo de MariaAdelaidebrunodemelo bradelaideasil que não éad hoje pftjaortio a b sc ue qs huo <a href="#" class="seekto" data-time="438">7:18</a>

[@nguyendat4004]

Hzbugz

[@lindsaythompson726]

Watch ?

[@PSVRestoration]

Alarm Clock)

[@captainr800]

A Watch is clock that you wear on your wrist, this is an alarm clock ⏰ to wake you up in the morning.

[@RonaldoSilva-tn8in]

𝗥𝗲𝘀𝘁𝗮𝘂𝗿𝗮𝗱𝗼 𝗗𝗲𝘀𝗽𝗲𝗿𝘁𝗮𝗱𝗼𝗿 ⏰😉

[@MaksymzOranmore]

Дуже гарно, але на мій погляд верхній циферблат занадто близько до цифри 12.

[@FlorencioSanque-dp3ck]

MAYBE THAT IS COFFEE CORUTION!!!?

[@Mrsevenbear]

another set up restoration ....sadly

[@PhoenixDown99999]

Please elaborate.

[@akastonefaceddog]

???

[@akastonefaceddog]

How is this set up??

[@VaporwaveOnVHS]

Another idiot……sadly

[@anthonyvincent5892]

Ooh...such a miserable pessimist...

[@POYRAZKASIRGA]

keşke bu kadar uğraşmsaydınız efendim ilk hali daha kullanışlı olurdu sağolun