PTW PTS Pmag Fix

#BlackEmeraldTactical #Airsoft #PTS #Systema
A video on how to get those pesky PTW PTS Pmags to feed properly. This is with the stock springs installed.
Feel free to like and subscribe to the channel and share about the place.

[@molecbr]

Excellent video shows what you got to do very well. I've tried three other mods and none of them work properly have done this and it works fine. 👍👍👍👍

[@impulsivetendencies0290]

My man! Thanks alot for the funny vid! Was getting desperate 🙈

[@BlackEmeraldTacticalOfficial]

Glad you liked dude 😁😁

[@eriksaaf2905]

Gonna try this tomorrow!

[@eriksaaf2905]

Didnt work but will try with double thickness. Worked one 1 but not the other two

[@AT-sf3wq]

Best video on this!! I actually used an old bank card for the same effect. I'm waiting to try it out now, second attempt as I had previously used a thinner yoghurt pot plastic. The only bit of advice I'd have is put the screw in the base and then slide the new plastic washer onto the thread and then sliding the cassette upwards, to save trying to line it up 👍 let's hope mine's all fixed now as sold 7 systema steels for the PMAGS 😓

[@AT-sf3wq]

@@BlackEmeraldTacticalOfficial no problem at all thanks for taking the time to make the video. Definitely post it to the Facebook group. Subscribed :) be good to see some more ptw gakeplay/tech stuff

[@AT-sf3wq]

@@BlackEmeraldTacticalOfficial Maybe some Team Tactics? Or some local sites? Looks like within a few years I'll be living up in your neck of the woods, so would be cool to see some sites and how you guys do it :)

[@AT-sf3wq]

@@BlackEmeraldTacticalOfficial Just an update, this totally worked! Coupled with a set of the MAG heavy springs this has fixed the mis feeds I was having! Thanks again Buddy the bank card is definitely noticeably making the feed lips sit much higher in the casing

[@AT-sf3wq]

@@BlackEmeraldTacticalOfficial yes of course I'll share it over on a few of the PTW and clone pages for you! Quite a few posts on these polymer headache boxes

[@AT-sf3wq]

@@BlackEmeraldTacticalOfficial shared dude.

[@slzslz]

This seems a hell of a lot simpler than the method i used. I USed AEG shims, on the inside of the chassi, over the screw, to push the shell outwards. Worked great on my PTS EPM's and also, the PMAG's now feed again. However, the PMAG'shave a hard time sounding right when its loaded with 70+ bbs :P

[@slzslz]

@@BlackEmeraldTacticalOfficial For sure. The EPM's hold way better QC and quality overall from out of the box.