Pulling Grain Auger Out Of HarveStore Silo

[@MatthewHoag77]

"Dude, shut up! *It will hear you!*" Hilarious and absolutely true. Maintenance always has a horrible sense of timing, even if you don't.

[@taylorjennings2218]

finally a new, shorter intro that I don't have to skip at the beginning of every video.

[@Doobie2100]

I agree with you. The mechanic God’s are always listening. No celebrating until job is finished. Haha usually there’s one screw, bolt, etc. holding you up just before you finish.

[@jbmbanter]

Thanks for the video! I check daily and am always glad to have any new content!

[@kswaynes7569]

I personally liked the old logo but as long as you keep up the conversations and your dry humor, I'll keep watching/listening.

[@waterskiingfool]

Like the new logo. I remember a video from Ryan dealing with this

[@mikelatham146]

I agree with Brittany 👍

[@cassiuspuckett8789]

So true, so true!!!!! Don't celebrate till the job is done. I don't know if what you're working on hears you or if it's always the last part or bolt, but it's something.... and you spend a unreal amount of time on it. Good luck on the gear box....

[@ranow3389]

New intro is a lot better. Also agree with you on celebrating too soon. Every time I comment on something too soon, something happens.

[@renaekatsma3666]

Like the new plants intro! Thanks for the video Travis!

[@lawaynehelmuth9581]

I'm in mechanic and I agree don't celebrate until the job is done you never know what you'll get into or what is hidden for you

[@andrewbusshardt4533]

The new intro is awesome!!! Yep never celebrate something that your working on til is all done it will give u problems usually after u say hey that wasnt so bad. Thanks for yet another grandpa story love them all and I have had a really bad day so made me feel alot better. Thanks Travis for all u do and cant wait for yet another great video to come along. Take care and have a good one!!!

[@garywaxler7866]

Amen Travis!!! When your working on equipment, you take all the advantages you can get. Always dealt with concrete silos myself.

[@patkelly7999]

100% true on the no celebrate till the job is done, new intro is nice Travis:)

[@jeffreyoneal1014]

Logo is really great. Love it!

[@lukestrawwalker]

Thank goodness it's shorter! The old one was nice, but TOO LONG... I had to forward past it every video... Nice the first three times after that just annoying. Later! OL J R

[@217daryl]

Along with celebrating before the job is done dont say "What else can go wrong"! We had two tractors break down in the same day after morning milking and then later in the day we had something else break down too so..... I learned not to say that when having a bad day! Great vid Travis keep them coming also like the intro!

[@14Marathons]

Love the new Logo and Intro as well as the entire video, and excellent life lesson advice..."don't celebrate too soon"! Thanks for the video, Travis.. Love your channel.

[@TheBeefFarmer]

hey travis, thanks for the video gets kinda boring waiting for snow to melt nice to watch something going on, on the farm!

[@noahschoenike2412]

Love the Logo and most importantly the Intro Music!!!!!

[@randywilliams3246]

Awesome logo

[@justinschmitz8034]

Wise words kemosabe yes it will hear you.

[@brianrutberford6407]

I agree with you 1 million percent. That is true to life in general.

[@galsgaardgalsgaard3419]

Love your new intros

[@josefr9353]

Great logo

[@JW-us7qh]

Nice! Keep up the good work.

[@danlowery3235]

As a maintenance mechanic at a steel mill, I hear what you're sayin.

[@samnadin2117]

Love the new intro

[@georgevojik5916]

The motor is filthy, good idea to blow it out very good while your there !!!

[@mikep7810]

Great logo and intro!

[@barrybeggs8543]

I like the new entrance also. Most all machinery works great between 10 deg and 85 Above or below it all turnes to "sh#t

[@tylerschierholz7534]

Great video

[@leol1682]

Like the new logo that auger brings it to the shop .

[@daveherriott5615]

Logo looks great.

[@clinthochrein888]

I love the Logo an the toe tapping intro music 🎵👍🏽

[@BrokeBoyzOutdoorz]

I love this channel

[@justanotherfarmer7091]

I like the new intro! Your voice is always quite. Sometimes it can be hard to hear you... I'd take working on those compared to the hay/silage unloader.

[@nathanbrodeur]

Nice new intro

[@davidchapin8297]

Like the new logo and intro.

[@brianrutberford6407]

Hope it goes good for you going back together.tell your brother he is a fixing jinx talking before it's done

[@thomasmarti5856]

I like the new intro....

[@tzerambo3140]

Like the new logo Travis

[@ChrisTessmer]

It's always the last bolt. Always.

[@Blueriverfarms]

Well said and very good advice!

[@RunV5]

I like the new intro

[@corydevries3494]

New logo looks good!

[@oscarbaxter298]

Logo is good

[@WBOS72]

Love the new logo/intro Travis.

[@Jeremy_811]

Great video and love the new intro! 👍

[@tannerfamilyfarms3450]

I thank my equipment every night, before putting em to rest. The ol girls deserve it.

[@schott106]

Does the end of the auger couple to the sweep?

[@Tannertraversed]

Logos awesome. If you could use a different font on the lettering or maybe a half circle style deal above or below the tractor? Thanks God bless.

[@Pinziee]

thx for the nice video ;-)

[@davidk.7264]

Thanks

[@SlipShodBob]

It has been t-shirt weather here to the point that we are thinking of putting the fertiliser out next week so no doubt the following week is when we will get a snow storm that or it'll pour next week though that might not be a bad thing as we haven't had much rain either.

[@jimcooney9019]

I thought you had an awesome intro video anyway. and like they say if it ain't broke don't fix it not going to say what I really think of the new intro but I'm not a fan but it's your channel do what you want with it to each their own but you really had an awesome intro video best I've ever seen but that's my opinion and you know how that goes everyone's got one

[@billylindauer3636]

Love the intro ontro and logo, white background could be darker (IN MY OPPINION) cool video🖒🖒🖒✋✋👊👊

[@ernestdougherty3162]

read video and you are 100% accurate don't say nothing about the job until it's 100% done and then sat quietly so it don't hear you I'm not superstitious either but I never say anything about a job but I'm working on it until I'm done with it and I walked away from it yeah there was a video of putting it back together if you don't care we'd appreciate it

[@rogerleiser6218]

Like the new intro. What's up with the motor for the auger? Dusty or Frosty?

[@TheRestOfTheStory]

Dusty

[@larrydartel1610]

are you going to use antiseize/silicone/grease on reassembly so you do not get curse with cursing when you have to remove it again,, why no grain came out, did you shut off a chute "OH CHUTE"

[@larrydartel1610]

back to story time--did you ever dare your siblings to stick their tongue on cold equipment

[@grantbuschmann6030]

I like it better

[@noelhohberger1188]

Don't ever celebrate well wrenching so right on the button

[@markcornell986]

Way is Ryan playing with his phone so much...

[@jimmesc]

first