Push-Back Pallet Rack Storage Systems | Apex Companies

Push-back storage rack is a go-to solution for medium to high-density storage needs. Typically designed to store pallets from 2 to 6 deep, push-back more than doubles storage capacity over standard selective rack… all within a condensed footprint which may just save the need for a major warehouse expansion.
3 major pluses to push-back are:
-Increased pallet density in a condensed footprint
-100% SKU selectivity - same as selective rack
-Ease of access - all pallets flow directly to aisle face
Learn more about push-back rack: apexwarehouses...
View push-back forlift training videos: www.apexwareho...
Contact the Apex Cos. team for a quote: apexwarehouses...
Push-back combines the density of drive-in rack with the selectivity of single-selective pallet rack using a series of mobile carts that ride on rails within each row. A loaded pallet is placed on the upper cart within the system. As the next pallet is loaded, the forklift gently pushes the first pallet load back, exposing the 2nd cart. The process continues until all carts are used (typically 3-4 deep), with the last pallet resting on the rails. As each pallet is extracted the subsequent pallet flows to the aisle face for selection, allowing for highly productive pallet retrieval.
Push-back is a last-in/first-out (LIFO) storage solution and not appropriate for items with expiration dates. Additional vertical clearance is needed per level to accommodate stacked carts which may limit the number of vertical positions available.

[@janudapannila3317]

Thank you very informative!

[@BestTreadCarefully]

Reach trucks are the best to use. Anything with an immediate downward and upward tilt. Sit downs work, but their forward and backward motion tilts make it so much more difficult and unsteady which causes more errors, especially with those who are new to the system. Reach trucks are the most accurate!! BY FAR!! Side shifts aren't abrubt and don't cause the load to sway and shake like with sit-down lifts

[@aselogist4122]

Favor enviar información de este sistema para solicitar cotizacion. Gracias

[@aaronluis11]

what's the wight limit per pallet on this rack system?

[@lahiruwolfchinthaka2825]

Push back system - LIFO

[@mastercool978]

😂

[@RobertKline-k9h]

Garbage....all good til a piece of wood or broken pallet gets stuck.