PXN V9 3 day review for PC!

[@jeremysuzuki7301]

“I never did any racing, But I used to f*ck around” i’m sold fam 😂

[@matthewtanaya1468]

Wait pxn v9 has force feedback?

[@old_newbie9498]

I figured it out! Here's how to get the PXN V9's shifter into the Reverse position: kzbin.info/www/bejne/hqPKgmlmjpqBrac

[@erickflores3261]

Push it down and shift to reverse

[@DAATChannel]

This is the budget version of the king of wheels the logic tech and question? Does it have force feed back if so it's in my cart

[@brandley7707]

No force feedback

[@kebabas3342]

Hey there, i am looking into buying an pxn v9 steering wheel and i have one question, can i plug in a usb handbrake bought from ebay?

[@njswk6843]

did u find the answer?

[@MohamedIbrahim-vk8tt]

Hi there. I have performed a clear all programmed button on my pxn v9 but how can I program the buttons again one by one? Thanks

[@ronaldchesterlorenzana6018]

Is this compatible for f1 2020?

[@trevorc8150]

Hey thinking about buying one of these myself how’s it holding up?

[@dylandetaeye]

an thrustmaster tmx pro force feedback is muck beter man. it cost around 240 euro. i have it now like 3 years and it is like new

[@jackmenn3069]

Dylan this is 200 bucks dum ass this is the all time best for 200 bucks

[@claymenard]

have you had any problems with the shifter?

[@lyzenfps7960]

Yo what’s up where did you buy forza on steam or Microsoft

[@ericaerica3284]

what did use to remount your wheel? And how did you do it? I need to this as well.

[@stopspro8]

I've been looking at this compared to the logitech g29 and 920. Would you say that this would be more worth it than spending the extra $50 + extra $60 for the shifter? I don't know if you know much about the logitech line but people highly recommend it. Long story short, do you think this wheel is as good or close to the quality of the logitech because Im looking for a wheel that has accurate clutch and manual transmission shifter. Thanks!

[@Beatsick69]

Hey Stopspro, I think the logitech g29 would be an upgrade to this steering wheel if we are talking about only the wheel. For the price of the PXN v9 though you get not only the steering wheel but the shifter and pedals which make everything waaay more realistic. The g29 has force feedback where as this only has bungee type and vibration but for me it was WELL worth saving over $150 by getting this instead of the g29 and spending the rest on other goodies. Hope this helps.

[@stopspro8]

@@Beatsick69 That helps a lot. Thanks so much!

[@xavestudio4623]

Planning to buy this for Dirt rally 2.0 and forza. Hows the deadzone??

[@T8orade]

well dont know if it holds up 5 months later but its pritty bad for me atleast, theres 25 degrese of dead zone but the software let me tune it into around 10, still annoying tho especially for small adjustments.

[@windowedthoughts]

@@T8orade Press Program button for 3 secs then up button. It could solve your problem. If it does not, take a look at the user guide for these steps. Worked for me.

[@ianespinar4888]

Does it have force feedback?

[@remington109]

Does this have motorized force feedback, bungee cord style feedback, or just vibration response? Thanks for the vid bro.

[@Beatsick69]

Hey Don I think it has bungee type feedback (the wheel resets to middle position) and vibration. For me this is the first wheel I get but playing Dirt Rally feels a million times more realistic!

[@remington109]

@@Beatsick69 Thanks for the response. I don't have any experience with these either and I figured for the price it was the bungee style, but still seems like a good buy. Again, appreciate the vid.

[@genieexhaustwa4628]

Hello, looking at this for my Son. Does it have a an auto function so pedals and shifter are not used?

[@FathiZaynMuhamad]

You mean like auto car ? If that's so, it's game setting not the wheel. Most driving game should have options for auto or shifts driving

[@genieexhaustwa4628]

@@FathiZaynMuhamad Thank you

[@aj_3631]

El volante es de plástico?

[@abdames]

Any idea why my gear shifter doesn't work? Already installed, but only 2 gears are working 3, 4 while the rest does not detect any input at all

[@Beatsick69]

Hey Anthony, make sure you are not pressing the shifter down when mapping 1,2,3,4,5,6. You can press shifter down when mapping R. Also make sure you are in the right mode (should say PXN V9 under "Controls" in Dirt Rally instead of Xbox Controller). Hope that helps!

[@abdames]

@@Beatsick69 wasnt pressing down have also switched the controller to DInput mode, was wondering if its a driver problem or hardware?

[@Beatsick69]

@@abdames it might be, have you tried downloading the drivers from the PXN website? I do remember downloading and installing them before setting up

[@ImmortalShiro]

I just bought one too weeks ago. Did you download the V9 Tool app, although i don't know if it has for ios. The app has default settings for the known games.

[@ImmortalShiro]

@@abdames I think it has two major settings. Xinput for racing and Dinput for Truck sims and alike.

[@davidtobias7213]

eres de colombia?

[@Skullmissile47]

Hi is the force feedback too fast or too slow? Or just like normal car

[@dragonfruit9364]

It doesnt have force feedback just a vibration

[@Skullmissile47]

@@dragonfruit9364 ya ik i bought it alr lol

[@saint4627]

I hope you would try it on assetto corsa i want to know how it responds to the game

[@Beatsick69]

Hey Sebastian, I tried it with AC Competizione and I had to get a refund for the game because I couldn't map the PXN V9. I'm way more of a rally guy than a GT guy tho so no big deal for me

[@saint4627]

@@Beatsick69 Thanks for trying tho! hope everything will work well in your games!

[@austinmorris3827]

Hey I got the same wheel and I can’t get it into 1,2,4 gear can you help me out ASAP

[@ervinebalatayo9156]

its compatible for fh4?

[@rus778]

yeah

[@0ni3e]

Hi I planing to buy and it good for forza horizon 4? And the gear good and where do you buy it from cause I saw one from Amazon

[@reflexvapor6290]

yeah it works with all racing games and its on amazon get the on for )199 because you get a gas,brake,clutch,shifter,and overall better than the v900 so get the v9

[@bootlegbrian2377]

Can we use a usb handbrake with this

[@Beatsick69]

Hey Brian, I don't see anywhere in the actual PXN V9 to connect the handbrake but I imagine Dirt rally does support it if you plug it in to your PC

[@bootlegbrian2377]

@@Beatsick69 thanks man

[@daffadhiyaulhaq3387]

When you play some racing games like forza, or project cars is it like plug and play or you need to config the steering wheel again?

[@chazthomas2082]

Hey does the pedals have a hard brake and a good throw on the clutch

[@Beatsick69]

The brake feels just like the gas and clutch. A little arcady but still good

[@chazthomas2082]

Ok thanks

[@rageattraction3103]

I'm 5'2 don't worry man😂

[@bysandj29]

shut up

[@Ghost88890REAL]

@@bysandj29 what up to all rappers shut up while your shuttin up keep a shirt on atleast a button up - MF DOOM

[@Benjamin-RPH]

@@Ghost88890REAL oof 😂

[@azumi-osaki]

Love me or hate me but this wheel is not the best "(¬ . ¬)" Let's cut bullshit in half, I am a girl and when I play (American Truck Simulator 1.39.x / 1.40) it has a ton of delay (see note below) in despite of the wheel settings (or configurations) PXN-V9 V3.87.exe and the setting controler in the game itself (!) In the curves, crossing someone or loading my trailer from behind, I have to predict the future to avoid any accidents and that is not normal at all. Note : Delay is... imagine you are holding a circular clock-wall in your hands and the number 12 is the center of the steering. When you decide to turn (left-right), to feel that you are turning, the center (number 12) must be to (or at) 57 mins of the clock and the same feeling to the right, 03 mins. The deadzone is 6 mins (!!!) it's very huge and I don't understand what is going on (!!!). The hard part is when you want to keep the road straight, you are always zigzaging with the steering (yellow line, white line, yellow line, white line just to find the perfect center. You feel so stressed that you must drive with two hands and you drink your sweat. When I use my own (real) car (I am always driving with one hand in the bottom) and I turn to minute 59 or 01 (always imagining the clock-wall) the car is turning just like that without question (for people who are driving I think you know what I am trying to say...) So what I have done is I unscrewed the steering to see inside and I feel being cursed (being a japanese, curse is the word...). Inside of it, it's cute and good job (solid gears, nice connections) but one of the gear holds a potentiometer of 10K (like an old volume button on the radio or equalizer on a tablemixer) and that potentiometer is the steering itself. What I have tried to do is to change that 10K potentiometer for another (not using the steering, only driving with the potentiometer) and the problem is there. The 0 middle zone destroy everything to enjoy the fun and it sucks... It's very sensitive when you turn but it's not made to drive straight with. I also tried to put a motor inside (like a 360° rotor) such as servo SG9 and a step motor for sensitivity and linearity but I am very limited with arduino stuffs (I am meteorologist). Otherwise, nice design for a 11 inch steering... it's just stupid to use a potentiometer "(¬ . ¬)" The pedals are still working (strong plastic, chrome plates over them) but very limited too. The sensors are like a scroll mouse (if you saw inside of a mouse), the resistance come from springs so I give 50/50 for it but nice design. The shifter... a small and cute one "(ღ˘ ⌣ ˘ღ)" same like the others, I unscrewed to see inside. Very simple, normal wires, strong springs, metal parts (looks like Logitech shifter (probably made in the same manufacturer) but the micro switches look like a joystick of playsation with extra push buttons (the TIC sound when we shift). If you are not speed-shifting like a V12 in a draft-yard, it's good (I don't like race games so that shifter is good for me). To resume... I still prefer to drive with my keyboard (arrow keys) using the perfect settings (sensitivity, linearity) but I feel sorry of my deception about that 10K potentiometer. For now, I try to convert my RJ-11 five wires connection shifter into USB four wires plug (to use with my keyboard) but like I said before, arduino stuffs is not really my department "(¬ . ¬)" I hope you enjoyed to read me (in despite of my english) but I will probably check for a Logitech G29 for the future "(= . =)"

[@zerberk3007]

Welp what you expect from 185usd

[@azumi-osaki]

@@zerberk3007 ...

[@dragonfruit9364]

Should i just go for the g920?

[@Aaron-bo4ne]

Can you play assetto corsa

[@animecaptaingaming]

HEY! A fellow Macross fan!

[@kasenxo]

Thank you bro

[@stopthecrazyness5812]

iu been having problem out of this wheel since I've had it . can't get to any of the setting and now i can't get out of reveres . don't buy this wheel

[@SnappySnapfire]

0o WOW Your mic is bad bro! Can't even watch you vid bud!