Pyrolysis of biomass cotton stalks using Aspen Plus

In this video, pyrolysis of cotton stalks is simulated using aspen plus.
For a small donation you can download the Aspen Plus file, the PowerPoint file, and the Excel file (in which the mass balance was calculated) from the following link:
www.paypal.com...
All Aspen simulations in this channel can be downloaded for a donation. After completing the donation, you will be redirected to the download page:
www.paypal.com...
[e-mail]

[@sowkhyareddy6839]

firstly its too informative and thank you for sharing such a video and can you please share the link for pyrolysis of biomass cotton stalk focus on bio oil for single particle modelling is will help me a lot

[@kgengineeringsolutions]

You're welcome. Please send me your email address.

[@shreyashrokde2910]

From where did you find the reactions for the biomass (more specifically stoichiometry coefficient) ?

[@saraelkourdi5596]

Thank you so much for this tutorial. Please make more tutorials about pyrolysis simulation.

[@surojikbal4505]

From where did you get the stoichiometry equations?

[@negojao9180]

Excellent video. Could you please explain the method you employed to obtain the stoichiometric coefficients?

[@paulofilho104]

Thanks for this video. Can this process be applied to any biomass, at least if we know the composition of biomass?

[@kgengineeringsolutions]

You're welcome. You must know the composition of the products.

[@jimmyloluolajide7777]

subscribed!!!! This is beyond amazing. I have sent you an email but forgot to mention the Rstoic calc excel sheet. A quick one pls, how do we incorporate pretreatment, drying and catalyst addition to the process? Thanks

[@kgengineeringsolutions]

Thanks for your comment! I have a video about the drying of biomass, see kzbin.info/www/bejne/aajKZ3SZnZJsaM0 . I hope the video helps. Unfortunately, I cannot help with the issues of pretreatment and catalyst addition at the moment.

[@MohamedAli-yd9qc]

Hello thanks alot for your effort. What about the char you didn't mention anything about it, and I tried to simulate but the error appears due to char missed data and you mentioned it as outlet stream. Thanks

[@kgengineeringsolutions]

You're welcome. Do you mean where I got the data I entered from 18:17?

[@NicolasClauser]

Hi, the same for me. When I run the simulation, char data is missed. How did you include it?

[@kgengineeringsolutions]

@@NicolasClauser See the video from 18:17

[@vanlong2350]

thank you for many beneficial videos. I have sent an email to ask you for more information about how to simulate pyrolysis process. Please, help me to do this project. Thanks

[@Kokusnussaffen]

On what literature you rely on to certify the assumed oil data? is there a reference for the stoichiometrics too?

[@kgengineeringsolutions]

I varied the stoichiometries until I got to the composition from experimental work based paper ==> An iterative process. I found the paper in www.sciencedirect.com. Unfortunately I don't remember which one it was.

[@emzy1433]

Please is it possible to incorporate a reactor and a fluidized bed model together so as to get a fluidized bed reactor for Pyrolysis? If so, how do I go about it

[@kgengineeringsolutions]

Hi, kzbin.info/www/bejne/nITGp5moj7upaLc and kzbin.info/www/bejne/j3m6qGiug55oiaM could help you

[@samuelmbugua975]

Thanks for this. Subscribed!

[@kgengineeringsolutions]

Thanks

[@sanjhaiprakashb1614]

Nice tutorial. Can you please mention the article name from which you have gathered numeric-data?

[@kgengineeringsolutions]

Thanks:-) See DOI: 10.1016 / j.biombioe.2018.11.019

[@qazinasir]

The ultimate / proximate analysis, how we can get these results experimentally. Any video or literature to share related to this. ?

[@kgengineeringsolutions]

This book contains information that may help onlinelibrary.wiley.com/doi/book/10.1002/9781119037699

[@javadjeddizahed1967]

Could you please explain how do you calculate fractional conversion?

[@khuramadeel467]

How to calculate organic value of biomass

[@disnigamlath7555]

Thank you very much!🙂

[@kgengineeringsolutions]

You're welcome:-)

[@DzuwaExpress]

Is the software available for download or sell i have checked the site but no any lucky?

[@javadjeddizahed1967]

@9:00 WOULD YOu please tell me how you defined organic value in SULFANAL?

[@kgengineeringsolutions]

I made an assumption

[@praveenb6584]

Thanks a lot, please can u make a video of cotton stalk gasification to get syngas..

[@praveenb6584]

Please if u find a dats regarding cotton stalk to syngas by gasification , please do a video.

[@kgengineeringsolutions]

Tank you for the comments. See this video kzbin.info/www/bejne/o4Kso4eYjdSmi80 It might help, if not write me please.

[@brijeshvaishnavv4359]

Can you tell me which reascher paper you used for simulatiin?

[@kgengineeringsolutions]

The approach is based on no paper.

[@xxx4651]

Hi, thanks for uploading the video! Can you let me know where did you get the fractional conversion data from?

[@kgengineeringsolutions]

Please send me an email and I will send you an Excel sheet where you can follow the procedure.

[@xxx4651]

@@kgengineeringsolutions That would be really nice! I just sent you an email.

[@panjiikhsan9480]

@@xxx4651 hey pals, do you got reply from this channel? can i get the excel from you?

[@dewi-lx4ig]

@@xxx4651 hi, sorry can you send me the excel file too? I already sent an email to the channel owner but no response :(

[@xxx4651]

@@dewi-lx4ig yes, but I need your email

[@N.A0200]

Whats the product of this process? Bio oil? Char? Hydrogen etc? Thanks

[@kgengineeringsolutions]

Char, bio oil, pyrolysis gas

[@dkekadid1]

How did you calculate the stoichiometric coefficient for the reaction?

[@kgengineeringsolutions]

It is difficult to describe the procedure here. Please send me an email and I will send you an Excel sheet where you can follow the procedure.

[@kentung673]

@@kgengineeringsolutions I have sent an email to you since I would like to have the excel sheet to understand the procedure. Thank you so much.

[@Engineering.topics]

👍

[@GunMachineakafalcon]

How did you determine fractional conversion?

[@kgengineeringsolutions]

Send me an email and I will send you an additional file.

[@GunMachineakafalcon]

@@kgengineeringsolutions (alpha_0 - alpha_t)/(alpha_0 -alpha_r) This is what know

[@Harmansingh-kl9kq]

Hi, Thanks for the video. Can you simulate a simple case of biomass gasification and add a video?

[@kgengineeringsolutions]

You're welcome. I'll try to make the video by the end of next week.

[@ayandasiphumelele2671]

@@kgengineeringsolutions Hi ,Thank you very much for the videos there are really helpfull. Can you please simulate a case of lignocellulosic biomass bioethanol production considering steam explosion pretreatment

[@kgengineeringsolutions]

@@ayandasiphumelele2671 You're welcome. Do you have literature about the process?

[@ayandasiphumelele2671]

@@kgengineeringsolutions Yes I have done and Im still on it thanks

[@asodariya1516]

Solid biomass possible in Aspen Plus ?

[@kgengineeringsolutions]

yes possible