Q&A I get on gauge clusters for a dash swap

[@overbudgetobschannel4584]

DAMN IT MAN!!!!! Never thought I would be so excited for a dash!!!!!

[@rayalston2552]

How do someone get in touch with you for work.

[@nephron9924]

Doin God's work man! Only a couple more months before I can get mine to ya

[@mrmotita510]

Damn that's badass looking. Can't wait to someday do that to my excursion

[@briandhoward6137]

Same here

[@DavidRomero-km4mj]

Love your work man. Do you do Dodge Ram Clusters? 4th gen to 3rd gen?

[@daimenellenburg8971]

My truck is a 2008 f250 with the 6.4... can you or do build an upgraded cluster like the one in the video?

[@zacharybishop6595]

Damn, never realized how interchangeable Ford parts are.

[@Punk-Jw]

Can one of these be made to work in a ranger...? with some fabing of course..I like the bezzle. I have an f450 for a work truck. I was thinking this in the stock ranger dash or fit a mustang dash in it somehow.

[@dennisz494]

Zach! You know electric well. I have a couple questions. I'm sorry it is about someone else system, but I really think they are over doing it. I think it is King Shaka. They sell a green board for the 2008 dash for the cluster. It comes with all the transistors so that we do not over load the dummy lights etc. However. We are connecting to this new green board straight from the terminals of the old lights. And with a fairly heavy gauge wire in relation if you ask me. My question: Do we really need to ave all these transistors when the Curren is allready passing through transistors on the old board before it is transferred to the ew board? And do we really need such a heavy gauge wire that they recommend as if the lighter gauge wire will burn out if we use it. As it is, the transistor are send very low voltage. I feel that it would be better to use a thinner wire ad be much easier to sandwich it all together. Ad if the current is heavy enough to burn the wire, then wouldn't it actually burn out the circuit board as the terminals and routes in the board are much thinner? I feel like I would rather have a wire short out, then have a bulb or rote on the board get shorted and burned out. Are you with me on this. It seems that we are now passing through two resistors for every bulb.And the wire we are using to tie it all together is so heavy that the rest of the board would burn out before any of the wire would burn out. Which would you rather see bro. The wire which could easily be replaced if it is one wire. Or replace the entire board which is what would happen if we burn out even one route in the board.

[@Mastertrapper16]

Have you heard of an issue with “cold solder” in the cluster for 2002 superduty that causes the radio and front power windows to not have power? I have had the issue, intermittently for 3-4 years now. If so, let me know if upgrading to a newer style cluster would resolve the issue.

[@mustangnoah1038]

interested in a gauge cluster like this for my 07 explorer sport trac, how can I get in touch with you and get this figured out

[@OhDamniiiTsRey]

My odo reads 338k, how does it read on the new cluster? Or do you program it to say 338k? Love the vids, keep em coming!

[@zacharymcfarlin1270]

yeah i can put anything on the odometer

[@jaredfragd6961]

Do you do custom gauge conversions?

[@GhostTactical06]

I have a 13 f250 and the mph and rpm needle have lines in them where they have cracked. I tried pulling them off like you showed but seems I'm going to break them. Do the new ones come off like this as well and are they pretty hard to pull off? I just don't want to break them. Thanks in advance.

[@jonathansimon7912]

Hey zach how do i get in contact with you to have some stuff done or ask questions?

[@Dancing-on-the-cube]

Do you do any upgrades to an old OBS '92-97 F350 dash?

[@kalebhavlin4556]

Hey can you please tell me if i would be able to swap my 2009 f150 xlt super cab cluster with a 2014 f150 xlt cluster will it plug in directly n will it have to be reprogrammed for my 09 ?

[@David-cd2ye]

Hi Zack I have a 2016 f350 diesel dually 6.7 it's an XL very basic instrument cluster tiny screen like 3 inches wide 3/4 inch tall can I up grade to a larger digital screen?any advise would be appreciated

[@derricporch1048]

How do I contact you bud. I have a 2015 F-350 6.7. I’d like to swap the 2” screen to that 4” screen. That’s looks phenomenal.

[@dallasedwards2679]

Can you do this for a 2006 6.0? If so where do I order?

[@Frankenstein-uc5rc]

Did you ever get your truck back?

[@codystephens4467]

Can you make a dashboard from a 2011 super duty diesel work in an 2007 ford super duty diesel with a 2011 dash in it cause I want to use the 2011 dash with cluster and steering column

[@cencoast_7.340]

Where did you learn to do this stuff?

[@AceBoy2099]

Question, do you know how to remove the PATS from a 99 F150 cluster? I know there's a chip on it that reads the PATS but I don't know what one (or how it works), what would I have to jumper/bypass to COMPLETELY disable the PATS? You can message me instead of posting if you'd rather.

[@julleonfischer4877]

How much to get this done and fit into my stock 2001 f250 7.3.?

[@joncook9610]

How do I order one of these or do I have to send you mine with a f150

[@racingboy1779]

Do you build any for the 11th gen outta the 12th gens?

[@LESKOSTEVEN]

How much are one of these swaps for you do!?

[@jfenix7]

Hi I’m doing a show build 2005 Colorado 4wd - LS twin turbo AWD. I’d like to swap my cluster with 2015 Denali, would you be able to program it if I purchased the ECM and cluster

[@dustinstradeski9379]

What do you charge for a cluster swap if i sent you mine??

[@tonysharoneubanks2762]

Way to go Zack, you make some mean stuff. Keep the vids coming! I've got an idea about some work to be done to my steering column. Ill send you an email. Later!

[@CisnerosMotorSport]

Do you do cluster swaps for 04-08 f150

[@cheche164]

Does it fit a 2000 ford ranger ? I want to swap a newer cluster to my ford ranger

[@leonevans6947]

Can you make a 2011 f150 platinum cluster work in a 2010 f150 platinum

[@armandolua3]

Does anyone know the colors current of the 2013 f150 cluster wires to adapt it to a 2009 f150 cluster can be posible?

[@mauricebarber187]

Can you build a digital dash for an 86 Pontiac grand prix

[@jaiidieeofficiall5927]

Can I update my old 2015 Camaro? I want new gauge cluster and radio system

[@williamaurnerjr.7328]

How much does one of these run?

[@dracodrake45]

These swaps makes me want to get a 99 03 super duty and swap it to look like a 19ish lol

[@doylebarnes7153]

Can you do a gauge cluster uo grade to an 08?

[@Joejunksitjunkremoval]

I need one for my 2015 f250 super duty 6.2 I would like the upgraded version from the lariat is that possible, do you sell them I would definitely buy one from you if you can build me one...let me know brother

[@56wonton]

hello, I'm hoping you can help, I have a 2016 f250 6.7 with a led cluster and tried switching to a 2016 digital cluster witch just cycled every 10 seconds, after further checking was told I need to replace with a 2012 f250 6.7 cluster which indeed works except now my engine brake will not activate and of course compass as well but was told that was displayed in mirror not in cluster like 2016. my engine brake is my concern. Can you give me any ideas on what to do? thank you!

[@gabrielsantos-gr7nf]

And how much for just to label the cables

[@kelanjones6823]

Can you get a 2020 camaro ss cluster to work in my old school ls swap?

[@bryancenterfitt7127]

Couldn't you run your pid list on the middle screen?

[@truth-media1]

Hey i got an f150 lariat. That i whant to swap that cluster. Can you help me out? What year 2014 or 2013 fit on my 2010 lariat? Any help ?

[@RemySkyye]

Can you do this for a 2004 ford explorer?

[@Kcuevas4]

Where do you get the needles from?? I'm looking for some red ones for a 2013 f150 platinum

[@dennisz494]

I seen them on eBay.

[@georgegarcia6359]

How can I get one Or how can I contact with you to get one I got a excurtion 2001 with 2011 dashboard swap

[@Aleasysn]

Is it possible to do the dash and guages in a OBS 7.3? Any hope?

[@bryancenterfitt7127]

That's what I'm wanting to know!?

[@jesseramirez7654]

Need one for a 05 bud

[@BobTheBreaker9]

Where do you work out of?

[@bryanvazquez8945]

Will this fit 1990 bronco ?

[@Franchis3]

You do any for 2009 f150 5.4?

[@gabrielsantos-gr7nf]

How can I contact you I need to read the cables to instal a 2011 mustang gt cluster on my 1966 ford f100 can _ou help me

[@ariezstarks4195]

Crown Vic compatible?

[@vetti39]

Hay I got a 2012 base model ,swaped my dash with a 2016 and doing my cluster, question is how do I change the milage??!!

[@ryanjohnson9650]

Hey, this is exactly what I was thinking of doing. Were the wiring clusters the same from the 2012 to the 2016?

[@eli.anderson]

I also have a similar question!

[@525pm]

Wondering this as well. Can you share more info about your swap and what you learned?

[@jeffhanson9946]

If I got a 2016 f350 gauge cluster with the bigger screen can you set the mileage to match my existing mileage?

[@zacharymcfarlin1270]

yes i can

[@jeffhanson9946]

@@zacharymcfarlin1270 Thank you I will be sending you an email detailing what I am looking for.

[@z6nechico546]

Can this work for a crown Victoria

[@salmonaco007]

Why Y did Ford make those 4 gauges so small at least 2 inch would be nice looks like they have room 4 it

[@Oakraidrs81]

1995 ford bronco?

[@kalebhavlin4556]

How do we get in contact with ya?

[@nextlevelfitness5327]

can you do a new cluster on a 1996 Bronco

[@JoseRomero-se5or]

Can this be swap on an obs??

[@OOLilDel]

Are you still backed up?

[@miguelcolin8196]

How can I order one cluster

[@hmayerv8]

Nice work, but basically it's only for Ford. I thought you'd do that for Volvo's too.

[@marcussmall5230]

Hey i got a 2003 chevy s10 with a 383 stroker can u build me 1

[@brappsquad2910]

Price ?

[@seanmahoney90]

How can I get that dash for a 1996 Bronco???

[@Oakraidrs81]

Same here bro i got a 95

[@rebelofsociety7045]

Yo where you located bro

[@ferest2065]

I have a f150 2010 I want to upgrade my cluster

[@jesussalinas5564]

Can u program like an 2014 cluster for a 2010 f150?

[@zacharymcfarlin1270]

i dont have any experience with F150s

[@starlyfe1ts]

@@zacharymcfarlin1270 what about a 04 Ford crown vic

[@gamblegamble6721]

How can I get one

[@abielvelazquez86]

Can you do a new cluster for a 2003 avalanche

[@zacharymcfarlin1270]

Nah I don’t have any experience with chevys

[@ohno6.0]

Can you do a 6.0?

[@briandhoward6137]

Yes you can

[@americantrucknation4891]

6.0 and 7.3 are the same in every way except headlights and grille, wiring is identical

[@mizzoujr]

can you make this for chevy? how do I contact?

[@zacharymcfarlin1270]

Nah I don’t have any experience with chevys

[@vetti39]

Oh also swaped my bed to a 2019 hit me up for pics

[@jonathanswartz3346]

Could I have your business name please? I have an 03 ford f150 I really want to update and make modern .

[@6sevenkingranch_968]

Why all does the lcd screen in the cluster display

[@6sevenkingranch_968]

I meant to put what

[@zacharymcfarlin1270]

What ever you want. Basically anything a SCt monitor could display this can

[@6sevenkingranch_968]

Zachary McFarlin is it a difficult process or fairly simple

[@jonathanrivera5371]

How i can l contact you

[@tashacorcoran2683]

Anyway I can get all of you to do a dash swap on my Excursion

[@tattooinstaller6525]

Where are you located? I can help you out if you’d like. Just respond in this message if you’d like to talk. Thank ya! Tat.

[@tashacorcoran2683]

@@tattooinstaller6525 in Wisconsin I did the front end swap and it came out pretty good but now looking to do the dash swap and I'm no body guy or mechanic so don't want to push it too far

[@tashacorcoran2683]

And messed something up it looks pretty difficult

[@MakerOfMadness2024]

Lol 😂 you want it to load faster go buy a 6.7!

[@kolbygrindstaff6364]

How’s it going with getting your 6.7 back?

[@zacharymcfarlin1270]

not good, i know who stole it and the cops dont even care

[@cencoast_7.340]

@@zacharymcfarlin1270 Force the issue, call the cops out on social media if you have to. Get a local news station to cover it?

[@kolbygrindstaff6364]

Insurance gonna handle it?

[@1920angus]

So sorry seen it once before. Bit silly me didn't write it down and can't remember. Can I please get a email or gmail address for you. I don't do Bookface. For reason can't explain on here. Got stuff I need to purchase from you. Thanks again.

[@zacharymcfarlin1270]

John Dady [e-mail]

[@BattleBornDmax]

Stolen truck update!

[@zacharymcfarlin1270]

BattleBornDmax nothing. I found guys selling parts off of it on Facebook market place and offer up but the cops said that’s not enough evidence to look into it

[@coleray5044]

Zachary McFarlin Put a kill switch and removable steering wheel in your vehicles.