Qa1 coilover install; test fitting my corleone forged 24s on the gbody el camino

Today i finally got to see how the wheels look on the car. We also got the coilover and ac parts installed....

[@nicholasbias764]

What's up from Norman.

[@DelvonDunkin]

Wassup bro 💪🏾💪🏾 405 in the building

[@traviswilliams2703]

Where did you order the rear end from Ford 9 inch and where gears are in it

[@DelvonDunkin]

I ordered the rear end from quick performance and I got 3.80 gears in it

[@ferrariboy3145]

what transmission crossmember did you use

[@DelvonDunkin]

I used a brp crossmember

[@ess.1020]

🔥🔥🔥

[@DelvonDunkin]

💪🏾💪🏾💪🏾🤞🏾

[@SprayWayCustoms]

You got it coming together real nice 👍🏾

[@DelvonDunkin]

Thanks bro i appreciate it

[@KeonDowdell]

Wat size rear end u got

[@DelvonDunkin]

I got a Ford 9" bro

[@k.j.2192]

Hey bro, will the full QA-1 suspension kit lift my Elco so I can put 24's on it? Or do I need a lift kit on top of the QA-1 suspension? I want to make sure I'm on the right track.

[@DelvonDunkin]

Yes once you get the qa1 suspension it will lift it enough for 24s

[@bigggkirk]

@@DelvonDunkin What kit would you recommend i have a 68 cuddy with 24’ but in need of an lift kit but i don’t know which 1 to purchase…????

[@DelvonDunkin]

@@bigggkirk I don't know much about lift kits bro, I've never had a lift kit before

[@cboyrecords]

Yo what up Delvon. What did you have to change in order for the front rims to fit. I am having the same problem. My front tire is suffering from the same issue u had in the video, not wanting to slide right on.

[@DelvonDunkin]

I shaved the fenders a lil and I also got a frame notch in the front too

[@ChoppazNBopaz214]

Where you get the front lower spoiler at the red part?

[@DelvonDunkin]

It came with the car but I'm pretty sure opgi got some

[@ChoppazNBopaz214]

@@DelvonDunkin nah its not there ive checked before preciate it though the one i didnt find from vicrez is discontinued

[@DelvonDunkin]

It's a guy on Facebook that makes them his name is josh Prather he did one of my friends

[@ChoppazNBopaz214]

@@DelvonDunkin thanks bro

[@Grant7]

Looking good...

[@DelvonDunkin]

Thanks bro

[@sinceDay_01]

Say fam, that look you wanna achieve in the back is called tucking. Gotta shorten your rearend, and cut the fenders welds our from the trunk. Probably need New driveshaft aswell........ but that costsss. And the cheap route is to just roll the fenders 😁

[@DelvonDunkin]

Yea i just rolled my fenders instead of doin all that. Im pretty close to the ride height i want it to be

[@Harlo86]

I just talked to a guy with 24x10s tucked and all he did was c notch the frame. He has at least a 6" lip. Stock length rear end.

[@TheSpacely11]

My boy keep grinding ✊🏾

[@DelvonDunkin]

Thanks bro 💪🏾

[@dandrecoleman7976]

What coil springs can I use to clear 24s wit out a kit. Please help thanks

[@DelvonDunkin]

I used qa1 coilovers

[@314mike7]

You still selling them Rims I get five bands....!

[@DelvonDunkin]

I decided to just keep em. I fell in love with them lol

[@SLICE_LIFE_SMOKE]

Did you lift the front

[@DelvonDunkin]

No i had 2 knuckles for each spring for now

[@SLICE_LIFE_SMOKE]

Ok thanks I might just have to get new springs

[@DelvonDunkin]

@@SLICE_LIFE_SMOKE yea ima end up doing the same instead of the knuckles.

[@Cuttyboy71]

What spring rate are your coil overs

[@DelvonDunkin]

Mine are 220 but my mechanic said i should've got 200. I dont have any complaints on the 220s tho..

[@deyonnebagby3961]

Who doin your frame notch and what the price tag

[@DelvonDunkin]

This guy my mechanic knew he charged me $800 Idk the guy tho

[@robertwarren9314]

You had to cut fo them 24s?

[@DelvonDunkin]

No u dont have to cut for 24s but i cut a lil in the front

[@robertwarren9314]

@@DelvonDunkin bet appreciate it

[@LSC.FOXBODY]

Keep them videos coming big homie. I hit that notification bell too💪🏾

[@DelvonDunkin]

Thanks bro i appreciate it

[@RigocerdaCerda]

This wheel on the driver side goes on the passenger side

[@DelvonDunkin]

Yea i know we was just test fitting on this video they're on the right way now

[@RigocerdaCerda]

@@DelvonDunkin is coming up badass... I just got one a 1979 i already got me ls 5.3 with the trasmisone. scary me one time keep up the good work

[@DelvonDunkin]

Thanks man i appreciate it. Goodluck on your build its stressful but its definitely worth it.

[@RigocerdaCerda]

@@DelvonDunkin thanks homie u from Memphis Tennessee

[@DelvonDunkin]

Naw im from Oklahoma city

[@jfootballstar1]

Coming together real nice 👍🏾

[@DelvonDunkin]

Thanks fam

[@dontethomas7925]

Yeah they should fit

[@DelvonDunkin]

Yea they fit i just gotta get my frame notched

[@dontethomas7925]

@@DelvonDunkin for the width huh

[@DelvonDunkin]

@@dontethomas7925 yep i got a 24x10 on the back

[@miaboo20111]

What’s the part number on those coil overs I need some ASAP

[@DelvonDunkin]

122-RCK52352 122-RCK52352 is the part number for the ones i used

[@04edge1000]

Looking good bro. Keep grinding. Motivation 💯

[@DelvonDunkin]

Thanks for the support my guy

[@RigocerdaCerda]

Yo bro what size of rear end

[@DelvonDunkin]

Ford 9"

[@RigocerdaCerda]

I need one of those

[@DelvonDunkin]

@@RigocerdaCerda u dint really need it but its supposed to be a better tougher rear end

[@RigocerdaCerda]

Yeah is a stronger 💪rear end it will take the betting game

[@ahkiureemshabazz4927]

El Camino💎

[@OOLilDel]

How you like the ride with the coil overs?

[@DelvonDunkin]

It ride good and its not scrubbing at all in the rear

[@OOLilDel]

@@DelvonDunkin Aite cool. Cause Ik they can lower in the rear like 2” but I need them to actually raise my car 2” in the front. Preciate the reply.

[@DelvonDunkin]

@@OOLilDel yea they can lower or raise your car. They're like a much better version of air shocks

[@OOLilDel]

@@DelvonDunkin oh okok. What’s the highest lift over stock can u go with them?

[@DelvonDunkin]

Idk exactly how high because i haven't tried to go higher. I went lower on the rear

[@DWillBGBodyPerformance]

Trying to catch up on your videos

[@DelvonDunkin]

Appreciate the support bro

[@shamontodman4852]

What spring rate you use in the rear

[@DelvonDunkin]

If im not mistaking i think it was 220

[@subz3ro43]

Oowee 💪 I see you doing your thing

[@DelvonDunkin]

Thanks bro 💪🏾💪🏾

[@johngriffith3377]

How much them rims run u?

[@iamkustom]

Family I like your build but when are you gonna start taking about what the video is supposed to be about 🤷

[@DelvonDunkin]

What is the video supposed to be about??

[@sedrickrobinson7273]

They staggered smh 🤦🏾‍♂️ that’s how they should be

[@salvaytion864]

I see u coming alone bro keep grinding bro

[@DelvonDunkin]

Im trying man thanks bro

[@kingofkings8709]

1000th subscriber .......

[@DelvonDunkin]

🙏🏾 thanks bro i appreciate the support man 💪🏾💪🏾

[@kingofkings8709]

No problem homie.... Now you can get monetized.......💯💯💯💯💯

[@DelvonDunkin]

💪🏾💪🏾💪🏾💯

[@STEEZO]

Looking good, can’t wait to see the paint job

[@DelvonDunkin]

Mannn thats the scariest part lol

[@xnihiloclothingtv2337]

Dope! Keep it up

[@DelvonDunkin]

Thanks fam

[@mikalaposley1287]

Bro I'm so glad I caught this video. I'm having the same issue with my studs on my 76 Monte Carlo.

[@DelvonDunkin]

Yea you just gotta get long studs if not your wheel will fall of while you're driving.

[@nickybias]

Oklahoma says hi

[@DelvonDunkin]

Thanks i love it #Oklahomaforever

[@dexterbryant230]

I see ya!!

[@DelvonDunkin]

Im trying my guy

[@dexterbryant230]

You got it 👍