Quick Repair | Water Leak on a Delonghi Magnifica S

[@yt.myworks]

Hello everyone, please note that this water loss error is often a different problem. If too much limescale accumulates under the heater cover, the water may not drip into the drip tray but next to it. In this case, the black cover must be removed and cleaned. I made a separate video on this topic: kzbin.info/www/bejne/mnOzoIt_brKYpLssi=UoReD7z4N2WALMTJ

[@Dlicious360pro]

This is not the magnifica s

[@claudiumihaiu7880]

Hi I have a magnifica S and when turn on no water coming out whatsoever and descale,tray coffee symbol and red triangle fashing. What would be the issue ? Please help. Thanks,

[@henkzaanstad2256]

Thanks.. Greetings from Holland

[@terneuv]

Impeccable 👍.

[@wayslow]

Heh, też ostatnio zauważyłem wodę w tym miejscu. Dzięki za protipa!

[@yt.myworks]

Czasami kapie ze zbiornika skroplin pary, to ten czarny obok po prawej stronie. To najczęstsza przyczyna jak nazbiera się już kamień.

[@pssscho]

@@yt.myworks Własnie przedchwilą go rozebrałem i widze że to przez kamień raczej. Jest na to jakiś sposób żeby co jakiś czas tego nie poprawiać ?

[@yt.myworks]

@@pssscho Tak, jest, używanie filtra lub filtrowanej wody ;-)

[@DrMt3b]

Thanks this videos is helpful 👍

[@yt.myworks]

There is another video about this problem kzbin.info/www/bejne/mnOzoIt_brKYpLs

[@MichaelDunlop123]

A joy to watch you work - thank you. Super camera work too. What do you use for filming by the way? All the best from New Zealand.

[@yt.myworks]

@Michael thanks for the great words. I use the CANON PowerShot G7 X Mark II and recently the SONY ZV-1. Greetings back to New Zealand.

[@MichaelDunlop123]

@@yt.myworks Thanks for the speedy acknowledgement - cheers!

[@Renegeits]

One more GREAT video. Is there are any chance to contact you for advise on repairing this machine issues?

[@dawnjohnston7758]

Hi, can you tell me the name of this part, mine also is broken Thank you

[@gaborszeles6387]

Hello! Many many thx for the video it is great. Please let me know that i found scale around "milk foam" maker. You can see what i mean at 2:29 on top at the fitting (yellow-black). Can i use normal Insulating tape for "repair?

[@yt.myworks]

@Gábor Szeles you can remove the housing of the heater (the black cover) and clean it inside. It is only attached with three screws. I advise against using a tape.

[@gaborszeles6387]

@@yt.myworks one Quick question can i start a "leakage" test mean turn on then off without the brew unit?

[@yt.myworks]

@@gaborszeles6387 This cannot be done without the brewing group, the machine will interrupt the process.

[@gaborszeles6387]

@@yt.myworks Many thanks keep up the good work. Subscribed before :)

[@annemiekvangolen5718]

We have the same problem, the flushing water flows in the tray below, but the part you mention in the video is not broken. What else can be the cause of this leaking?

[@yt.myworks]

It could be that the expansion chamber is very dirty or calcified. This is under the black cover of the heater. After cleaning this part everything should fit again.

[@annemiekvangolen5718]

@@yt.myworks thanks for your reply, maybe you have a photo of this part?

[@yt.myworks]

The part can be seen in my other video (min. 2;22) kzbin.info/www/bejne/iaapgKiLZseJiJI

[@StanisawSwierczynski]

super

[@yakumoklesk]

Have you ever found an ecam 22.110 that when dial is on max only grinds for 3 seconds? I have one and is the only thing that drives me nuts. I've tried everything except replace the board where there is the pic miceocontroller.

[@yt.myworks]

Hello, first of all, you need to make sure that the brewing group is easy to move by hand. Otherwise, the machine thinks that too much coffee has been ground and reduces the time of the grinding process. After the brew group has been cleaned and regreased, prepare more than 5x coffee without coffee beans (ignore the error message). After that, the grinding time should be set back to 6-7 seconds. See also my other video about DeLonghi ECAM Mantenance: kzbin.info/www/bejne/hXu6mKiJnN6ZasU

[@abdoelmajid2371]

👍

[@jeffreyrosen-z5b]

I found my leak is due to the Steam valve assembly. Do you know how to remove and replace the Magnifica S complete steam valvembly. I am stuck at the connection between the aeembly and the steam wand. Any help is appreciated

[@yt.myworks]

In this video (min. 7.54) you can see how to get to the part: kzbin.info/www/bejne/nGPQZWmdqsuih5osi=stJy_k0sA4KTtaCF Very often, however, another problem is responsible for the leak, which you can see here: kzbin.info/www/bejne/mnOzoIt_brKYpLssi=HkqIuAEFcY-CsJKP

[@JonathanRichardsonUK]

Same, I opened it and it's the inside connection that the external steam on/off switch connects to that's leaking. Not sure why as it's not damaged.

[@cipriantertan3687]

Hi, I just bought a different version, Magnifica Evo. Short question, at the automatic cleaning at power up, when water is flowing from the pipes (where the coffee is also flowing when preparing it) is it normal to see/have a bit of water flowing out from the left part? (where all the water flows in your case at the beginning)? I see a bit a flowing also when powering off/turning off, but not so much as when turning on the device. Thank you!

[@yt.myworks]

I haven't had a Delonghi Evo yet, but as far as I know there shouldn't be any water coming out of the steam nozzle.

[@kjcthegreat]

Hello, I also have the same problem with the machine that I just bought. Have you found a solution for this?

[@claudesulpizi5787]

I have a similar problem, on powerup when it is doing the cleaning cycle, I always find a bit of water going into the coffee grind container. How do I stop that from happening? I've replaced the o-rings on the brew head and on the infuser, and still leaks only during the first rinse.

[@williammelvin]

Hi, I just bought Evo too, and I assumed this was a normal cleaning cycle on start up and shit down, I have a small cup next to it also and just empty it out. Is this not meant to happen?

[@williammelvin]

I have just read that the evo does a self clean and rinse on every start up and power down and it is normal for it to go straight into the drip tray.

[@אליהוחמו-צ5ס]

Hello. Wher to buy parts and o ring for this coffee mashin?

[@chriscumming5699]

How do I take the top cover off this machine? I have removed all visible screws and the steam dial. The cover seems to be stuck close to the left hand side buttons

[@nutorious123]

May you let me know where you got the spare part from and what's it called?

[@yt.myworks]

@Nutorious you have to make sure that the part on your machine is also broken. Most of the time it is another problem why the machine is losing water. You have to open the cover to find the bug.

[@_savage_]

Hi, friend. I don't add coffee, the rest goes into the pallet like yours, what can it be? Thank you.

[@suzannechapman3334]

Hello, I have replaced difuser but still have an issue with water back filling the tray, I now have the side panel off and the white valves look intact there is a pipe to the right of the white valve seems to be very dry possibly blocked can I load an image for you to advise further?

[@yt.myworks]

@Suzanne Chapman yes, send the image to yt.my...

[@tespanton3886]

Hi! First of all, I love your videos, excellent description and attention to detail! I have a question to which until now I get mixed opinions: I just purchased two new ECAM 22.112.B machines and especially when water temp. is set to level 4, they both dump a somewhat considerable amount of water from the hose on the left side in the drip tray before and after making coffee (yield seems unaffected at ~40grams for single cup). Is this normal or I just got a bad batch as they are both brand new. Also should there be water drips in the waste coffee dreg basket? Thank you!

[@yt.myworks]

Hello, it is normal for water to drip from the left side of the machine, especially after making coffee or using the milk frother. After rinsing, a few drops may also end up in the pulp container. However, the coffee pucks should remain pressed and dry.

[@tespanton3886]

@@yt.myworks Thank you so much for the reply! Good to know and feel at ease, since I could not find any solid information elsewhere. Best regards!

[@marinossoteriou3893]

hello. when I start the coffee machine there is a water leak but not as much as you have and this part is not broken either.. it takes out about 10ml of water and a little coffee powder in one shot of espresso. is this normal? 

[@yt.myworks]

It is normal for some water to leak here. However, it should not drip next to it. If this is the case, the exit site must be cleaned of limescale deposits as much as possible.

[@xristoskatsioros6183]

hi, thanks for the video its helpful. I have delonghi magnifica s, and i want to know with what liquid can i do desalination? the manual refered no vinegar, only liquid from delonghi, why? is the boiler inox, or its aluminioum ?

[@yt.myworks]

The water heater is inox but the vinegar is not good for the seals. You can use any descaler intended for fully automatic coffee machines.

[@skeletor7791]

Delongi uses lactic acid 30-50% concentration. I bought 5 liters of 80% lactic acid for 25 €. It will last forever. Don't use citric acid, it could damage your machine.

[@ljp1942]

What is the function of the small red tray my Prima Donna Soul Leaks water there sometimes ?.

[@yt.myworks]

The water comes from the expansion chamber. In the red tank dripping water when the drip tray is removed.

[@ljp1942]

@@yt.myworks Thanks I thought my machine was faulty.

[@beckyrotterdam5577]

Good job! I am currently trying to get my delonghi working like it used to. It is leaking into the tray after I make my coffee, is that normal to get rid of the pressure? I havent seen a leak inside the machine yet

[@yt.myworks]

@Becky a little water in the drip tray is normal. If the cup is no longer full as usual, there is a leak somewhere in the machine.

[@beckyrotterdam5577]

@@yt.myworks maximum is 150ml, I think that is normal. The most water in the tray is when I use hot water. But it is still not much (not covering the whole tray with water). I found out that setting the grinder makes it in some settings really slow. That solved the biggest issue now.

[@chriscumming5699]

@@yt.myworks My problem seems to be intermittent. Sometimes the cup is full to the normal level but more often it is less than the normal level. I have taken the sides off but can't see any obvious leaks. Any ideas? Also I am unable to remove the top cover.

[@marcoskv]

Many thanks for your videos! They are very helpful! My DeLonghi ECAM Autentica started leaking water. From time to time the coffee is shorter than usual, and the coffee collector contains water. Moreover, when I turn on the machine, often there is no water during the cleaning process, and the machine goes in error (a red triangle appears), and I have to press the power switch to turn off the machine... wait a bit... press again the power switch... and press the button to try to start it again. It happens often that I have to try this multiple times before I am able to make a coffee. Finally, the coffee is also colder than usual. I have already cleaned the machine, performed the decalcification procedure, cleaned (and then also replaced) the infuser. Any suggestion?

[@yt.myworks]

Hi, it may be that there are leaks on the water pipes. In addition, if the water collects in the drip tray, it can mean that the upper infuser is also leaking.

[@marcoskv]

@@yt.myworks Many thanks! Can I send it to you? 🙂

[@junglingo]

Is it normal on a brand new machine for a small amount of water to flow into the drip tray AFTER the coffee has finished brewing? thanks

[@yt.myworks]

Yes, a few drops of water per coffee is normal.

[@speedy4203]

Hey, thank you for sharing all of this! I have a problem with the steam mechanism of my machine. When steam is selected, I ear the pump "pulsing" and best case senario I only get steam for a few second, if any comes out at all. When the switch is turned off, all the pressure is released and a lot of steam/water leak into the bottom red tray from I assume the steam valve. The water works fine and comes out normally. I understand water and steam share the same path down the wand, no other leak have been found. Do you have an idea on what can be faulty? Thanks again.

[@yt.myworks]

Hi, which DeLonghi model do you have 2.XXX?

[@speedy4203]

@@yt.myworks Yes, I have a 22.110B. Thanks.

[@uelikeller6628]

Very helpful, thanks. However, where did you get the exchanged part from? And if I can order it somewhere, what is the name of this part?

[@michaelgreen393]

That's my question 🤣

[@qoakzms]

Yeah same

[@yusufaras01]

How this part get broken easily? is it happening because of heat?

[@yt.myworks]

I think that could have been transport damage.

[@PINAY1000]

What is the part name and number that is broken and where can I buy it? Thank you.

[@yt.myworks]

In most cases, a clogged heater housing is responsible for the leak. You must first open the case to see if the part is broken.

[@Kimdah_]

My Magnifica S keeps giving the error that it’s dirty while I’ve cleaned everything. Water tank, drip tray, infuser, the small red thinghy and the grounds bin. Yet it keeps giving me the error, and it also won’t rinse when I press the button, I just hear the infuser move and then it gives the error.

[@yt.myworks]

It could be that the brew group cannot find the right position. That would mean that the transmission is already worn out. How old is the machine?

[@Kimdah_]

@@yt.myworks It’s about 3 years old, so not even that old yet.

[@yt.myworks]

Does the water flow out of the milk frother when you flip the switch?

[@Kimdah_]

@@yt.myworks When it’s displaying the error, it does not.

[@qoakzms]

I have the same problem too, we’re you ever able to fix it?

[@as-es4970]

Hallo und vielen Dank für die vielen Videos. Klasse gemacht. Ich hab aktuell ein Problem mit meiner Delonghi Primadonna Class. Und zwar verliert auch diese Wasser unten links unter die Maschine. Es tropft unten bei dem Gummiauslass zur Tropfschale daneben und läuft dann hinter die Schale unter die Maschine. Hatte das Seitenteil auch schon ab, man sieht aber nicht so recht wo das Peoblem ist. Zufällig eine Idee wie dem Abhilfe geschaffen werden kann. Kann man diese Gummidichtungbeinfach abziehen? Viele Grüße und weiter so!

[@yt.myworks]

Hallo, meistens ist das Heizungsgehäuse von Innen verstopft oder verschmutzt. Das ist die schwarze Abdeckung auf der linken Seite die abgebaut und von innen sauber gemacht werden muss. Danach sollte wieder alles passen.

[@as-es4970]

@@yt.myworks Vielen Dank für die Antwort. Ich werde heute Abend einmal schauen ob ich das Gehäuse da ohne Probleme raus bekomme. Sah schon recht verbaut aus.

[@thuyhuynht.t.8646]

greeting from the NL, wonderful works, many thanks, guess that your location would be not feasible to help me with refurbishment my Magnifica S? it leaked water (don't know from where), and now it caused the safety switch of my home electric board to turn off whenever I turned the brewing button on!

[@yt.myworks]

I think you can find out quickly after you open the housing where there is the water leak. Greetings back to Netherlands!

[@thuyhuynht.t.8646]

Dear MyWorks, appreciate highly for your reply. I will check 1st the location of the water leak and will report you for further advice. You are so kind. Your videos are amazing!

[@thuyhuynht.t.8646]

@@yt.myworks is there any chance that I can send the machine to you for repair? I do not see any chance that I could make the check and fix it myself.

[@alintomaogrezeanu881]

Hello what name have this part or code can you help me .thanks

[@yt.myworks]

Hello, please note that this water loss error is often a different problem. If too much limescale accumulates under the heater cover, the water may not drip into the drip tray but next to it. In this case, the heater black cover must be removed and cleaned. I made a separate video on this topic: kzbin.info/www/bejne/mnOzoIt_brKYpLssi=UoReD7z4N2WALMTJ

[@PiotrK2022]

@ myworks Ale jaja... Spodziewałbym się tego równie mocno jak hiszpańskiej inkwizycji - hah.Tylko to potwierdza moją opinię, że warto trzymać wszystkie elementy, bo nigdy nie wiadomo co się uszkodzi i potem może być problem...

[@randommusings48]

Hi there, I have a Delonghi PrimaDonna S. The machine doesn't brew coffee anymore. For some reason the water goes straight to the drip tray. Do you know what the problem is? I'm guessing it could be the OPV?

[@yt.myworks]

I think the problem is in the brewing piston which is located at the top inside the machine: kzbin.info/www/bejne/aYKlfaKKgsyHm8U

[@maurogiochi4044]

Hi myworks, sorry to trouble you via the comments section but I was wondering if you could help me with something. I have this ECAM model and the coffee is kinda cold. I have to use the rinse button 4 or 5 times before I get a decently warm coffee. The water that comes out during the warm up and rinse (before shut down) is boiling hot though. I have taken the whole thing apart and cleaned it, I have replaced all the gaskets and I can't see any problems with the thermostat fuses. DeLonghi doesn't want to help and I'm not sure whether to get a new boiler unit or if perhaps the sensors could be the fault. I would appreciate any suggestions if you have the time. Thanks

[@yt.myworks]

I recommend replacing the heater and the thermal sensor. I had such a case recently and after replacing it, the coffee got hot again. You can get the spare parts on ebay or other internet shops like this one: www.ebay.de/itm/185445687146?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=vfQ-gIsxQ6W&sssrc=2349624&ssuid=fqjNmJj7Q9S&var=&widget_ver=artemis&media=WHATS_APP

[@rosasciandrone8578]

Cerco una assistenza tecnica nella mia provincia Agrigento mi sai dire qualcosa grazie

[@konradpustulka2251]

Dzień dobry, mam taki sam ekspres i podobny problem. Woda leje się do tacki nie robi kawy. rzecz w tym ,że pokazana na tym wideo części jest dobra. Co Pana zdaniem mogło się zepsuć?

[@yt.myworks]

Należałoby sprawdzić skąd cieknie woda do tacki ale myślę że problem będzie z górnym tlokiem Zaparzacza: kzbin.info/www/bejne/aYKlfaKKgsyHm8U

[@konradpustulka2251]

@@yt.myworks Dziękuję za podopwiedź. Kierunek wydaje się być słuszny, bo woda jest podgrzewana i pompowana do bloku - stwierdzam po tym, że jego obudowa jest ciepła w momencie robienia kawy- jednak nie ma kontaktu wody ze zmieloną kawą, która następnie spada do pojemnika na fusy w postaci suchej. Rozkręciłem blok zaparzacza, według Pana instrukcji, wyczyściłem wszystko i czekam na komplet nowych uszczelek. Aha, ważne pytanie jak nazywa się ta część, przeźroczysty plastik w sprężynie? Na filmiku tłok zaparzacza 2 minuta 27 sekunda ? U mnie tego nie było. Bardzo się ździwiłem. Można to kupić? I gdzie ewentualnie Ekspres już był w naprawie kiedyś, być może wtedy zapomnieli to włożyć. Dziękuję za odpowiedź. Pozdrawiam.

[@konradpustulka2251]

OK, wyciek naprawiony wymieniony komplet uszczelek + nowa pompa ulka, ale mam inny Problem. Otóż jak się wyłączy ekspres i chcę go ponownie włączyć, aby zrobić jeszcze kawę to już nie mogę. Słuchać jak się ustawia przesuwa "wózek", po czym zapala się czerwona kontrolka Trójkąt z wykrzyknikiem i tyle! Nic nie można zrobić. Można włączyć ekspres dopiero po jakimś czasie, po około 2 godzinach. Pytanie co mu dolega ?

[@yt.myworks]

@@konradpustulka2251To mogło by oznaczać że zaparzacz nie może znaleźć pozycji wyjściowej. Sprawdź czy dobrze przykręcony jest przełącznik mikro, to ten biały u góry z dwoma kabelkami.

[@konradpustulka2251]

@@yt.myworks Ok, dla pewności zapytam, to jest ten, który widać na twoim wideo ,, Składam nowy ekspres do kawy Delonghi Cappuccino", gdzie w 7 min.50 sek. wpinnasz dwie wtyczki ? Pozdrawiam.

[@mrgonk3060]

Hi Myworks - These videos are both instructive & satisfying! I have a similar issue on my ECAM22 where all hot water is ejected into the drip tray via the steam valve drain (i.e nothing from the coffee nozzle at all). There are no blockages, its not the pressure release valve, and hot water is being pumped into the coffee generator fine. The problem happened very suddenly. Any ideas? Thanks!

[@yt.myworks]

Hello, I recommend replacing the seals in the brewing piston. I suspect a blockage in the generator. See another video on the same topic: kzbin.info/www/bejne/aYKlfaKKgsyHm8U

[@mrgonk3060]

@@yt.myworks Many thanks for replying, yes that's the best link, it turned out to be a torn oring in the brew piston infuser allowing water to bypass to directly to the 'drain' via the bottom of the steam valve! Your videos have certainly helped me understand these machines are not as complicated as they first appear and much of the 'magic' is actually simply mechanical valves

[@wojtekmosh5900]

U mnie woda leci do traya mimo że zmieli kawe ale problem nie jest zawsze raz na kilka kawek ten łącznik sprawdziłem nie jest uszkodzony ani zapchany? Jakiś pomysł

[@yt.myworks]

@Wojtek spróbuj odkamienić pobprzez wylewkę kawy tak jak pokazane jest w moim innym filmie: kzbin.info/www/bejne/hXu6mKiJnN6ZasU

[@ANTONIALABEL]

Hi, my Delonghi Magnifica s does not run water through the BREW UNIT but pumps it straight into the drip tray, I replaced the steam tap but still fills the water tray could it be a solenoid problem?

[@yt.myworks]

Hello, most often the problem is in the brewing piston, maybe something is calcified or clogged.

[@frankenstein974]

I keep seeing coffee in the container that holds the coffee grounds. How do I fix that problem?

[@yt.myworks]

Is maybe this problem: kzbin.info/www/bejne/aYKlfaKKgsyHm8U

[@Bialy092]

hi, I bought a new EP5GW pump, and I have a problem because I don't want to suck in water myself .. what am I doing wrong?

[@yt.myworks]

Are the hoses connected correctly? If so, it may take a few seconds for the water to get into the pump.

[@Bialy092]

@@yt.myworks yes they are correct. Do you need to prime the pump before it is dry?

[@alinamoraru598]

Hello, how it’s called this part? And where I can buy it? Thank you

[@yt.myworks]

Hello, please note that this water loss error is often a different problem. If too much limescale accumulates under the heater cover, the water may not drip into the drip tray but next to it. In this case, the black cover must be removed and cleaned. I made a separate video on this topic: kzbin.info/www/bejne/mnOzoIt_brKYpLssi=UoReD7z4N2WALMTJ

[@elz6191]

Hi my Magnifica drips when I insert the water tank fully. Any help?

[@yt.myworks]

Where is it dripping from?

[@konradpustulka2251]

Dzień dobry, jaka może być przyczyna, że dysza od spieniania mleka nie spienia go. Woda gorąca wypływa z dyszy, a więc jest ona drożna. Natomiast para podczas spieniania wylatuje z dyszy bardzo słabo, większość jej uchodzi do zbiornika na skropliny.

[@yt.myworks]

Część, jaki model maszyny?

[@konradpustulka2251]

@@yt.myworks Magnifica S Delonghi

[@yt.myworks]

@@konradpustulka2251 Czy próbowałeś maszynę dobrze odkamienić?

[@konradpustulka2251]

@@yt.myworks Pytanie co znaczy dobrze, ekspres jest regularnie odkamieniany,. Chyba że należy odkamienić dodatkowo coś jeszcze?

[@yt.myworks]

@@konradpustulka2251 kiedy ostatnio? Czy środkiem dedykowanym do ekspresów? Warto zacząć od najprostszych czynności.

[@desmondchan6092]

Why did it break?

[@yt.myworks]

I think the device fell over

[@Meta_Gryphon]

The screwdriver to open this machine is totally special. Don’t expect to open it with normal tools. I do hope EU regulations will fix that one day. Delonghi desserves a massive fine for that. I can’t fix this machine myself because they made it difficult to open.

[@yt.myworks]

You can open the screws with a narrow, flat screwdriver.

[@mkk6758]

Simple hexagonal screwdriver you find in any toolshop

[@skeletor7791]

@@mkk6758 No, doesn't work, it's strange

[@DK-um4go]

It’s a t20 ‘security torx bit’

[@OsamaTheTurBinator]

​@@DK-um4go I'm honestly surprised how thick these people are 😂 you are right its a t20 not a "special tool" 🤣🙈🙈🙈🙈

[@ih5726]

Hello friend my coffee machine with you, my coffee machine in the production of coffee, even though I put the coffee machine cleaning process before and after water with glass picked up, but the drip tray below are always don't know where to clean water, pull out after the drip tray to see, as if also drop left the position, but not very serious, Do you also want to follow your tutorial to replace the white link block? What's the name of this thing? Thank you

[@yt.myworks]

In most cases, the heater housing is calcified, causing the water to drip next to it. In this case, the housing would have to be cleaned from the inside. I'll be making a video on this topic soon.

[@mrsc6593]

Hi, we have exactly the same one but it leaks water in the coffee grounds container. Any idea?

[@yt.myworks]

I think that the brewing piston is leaking, I made an extra video for this problem: kzbin.info/www/bejne/aYKlfaKKgsyHm8U

[@mrsc6593]

@@yt.myworks Thanks a lot for being so helpful!

[@bkalo724]

This what was replace in our unit

[@johannsebastianbach4763]

Hi. I've a problem with the milk frother. After about a year of using it, the milk frother doesn't work properly. The steam comes out with a bit louder, the milk becomes hot but without foam. The question is: did you get the same issue and if yes what is it or what do I have to operate? Thanks a lot.

[@yt.myworks]

Which DeLonghi model do you have? With a milk container?

[@johannsebastianbach4763]

@@yt.myworks Hi. Thanks a lot for answered me. The model is Magnifica S (ECAM 20.116).

[@petrajadudova]

@@johannsebastianbach4763 hello, did you eliminate the issue? if yes, how?

[@johannsebastianbach4763]

@@petrajadudova hello. Unfortunately not yet. It's a little bit complicated and I've to repeat all the steps and make it.

[@ArcticGentoo]

My brand new dinamica plus is leaking from the bottom left...... have to return it.

[@yt.myworks]

This is quite normal when a few drops of water come out on the left side. This happens especially after a cappuccino has been prepared. The small red drip tray is intended for this purpose, in case you remove the drip tray.

[@ArcticGentoo]

@yt.myworks bought it from amazon warehouse. There was loose connection inside the machine. Even after sorting that I found something wrong with the flow and grinder..... getting a replacement.

[@СергейПоломошнов-с5р]

Здравствуйте . скажите пожалуйста , а если не несколько капель а около 70-80 мл при приготовление​@@yt.myworks

[@СергейПоломошнов-с5р]

​@@yt.myworksЗдравствуйте бежит не каплями, а прилично при приготовление кофе

[@flavioleorati8504]

guten morgen, de lobghi magnifica s. Das Infusor t in der oberen Position blockiert, ich habe es manuell durch Drehen des Motors positioniert Sieb in der oberen Position befindet. Ich habe es manuell zurückgestellt, indem ich den Motor von Hand gedreht habe, das Dreieckslicht und die beiden grünen Lichter an den Tassenknöpfen gingen an .Jetzt hängt das Auto fest, es könnte der Antriebsmotor sein. Ich habe Google Translator verwendet, Entschuldigung für Fehler. Danke • Feedback

[@yt.myworks]

Either the limit switches are broken or the transmission is worn out. In this case, you will need to purchase a replacement part or repair it. Check out my other video on this issue: kzbin.info/www/bejne/fouboISLfNmDoMU

[@flavioleorati8504]

@@yt.myworks the transmission seems to be in good condition. Can I know if it is the limit switch or the motor?

[@yt.myworks]

If the transmission is too loose then the brew group cannot find the right position. The electronics calculate the revolutions from the spindle. After that, an error message appears. This is the most common cause of this error.

[@madontherun]

These delonghi are expensive ,but ultimately Chinese crap with a posh badge. Most expensive coffee maker ive ever bought and it lasted about 15 months of very occasional use

[@fimked803]

Mine lasted 10 years and made 6-15 cups daily.

[@alexandreb.1101]

They're still reasonably affordable as far as superautomatic coffee makers go, and the ECAM series are very modular with parts for them found everywhere. The brewing unit for the De'Longhi, for example, costs 1/4 of what it did for my previous Koenig which didn't have half of the functions

[@wieso.]

I have the same problem in a much newer Delonghi. FCKING Delonghi :@