I love how well this video is put together it's so unbelievably helpful
@FatScottie33 Жыл бұрын
Fasho!
@basketcas37173 жыл бұрын
When I got into reloading I was always intimidated by the dial caliper so I just used a digital. Over time I became more interested in the dial so I purchased one. Love it even more than the digital now.
@DangerousDaveyBoy3 жыл бұрын
You just showed us how to read a dial caliper. Pure and simple. I watched another video from someone else that put out a confusing 30 minute video and showed them writing down numbers on paper and calculating it with formulas. Lol. Wow. Thanks for the video!! And thanks for being straight up with no BS like the other guys.
@TheColosiss Жыл бұрын
Thank you Brownells for your instructional videos.
@jamesharber782027 күн бұрын
EXCELLENT explanation! I watched another video on this subject this morning, and it was Greek to me. Thank you.
@wboquist5 жыл бұрын
Great, no nonsense presentation of information.
@MwSama4 жыл бұрын
absolutely i have a quiz on how to use this and the teacher gave a long presentation and this only like 2min :)))))))))))))))))
@bearly17273 жыл бұрын
FIRST TIME i ACTUALLY UNDERSTOOD HOW THEY ARE READ. Thank You!
@michaelpyles78653 жыл бұрын
That made absolute perfect sense to me. Thank you for the simple and easy to digest info there, this was really helpful. At a job I started not too long ago at a metal cutting and distribution facility they have been training me to run one of the saws and on the orders that have really small cut tolerance margins (like 5/1000 of an inch) we have to use calipers to check our parts after every cut. My boss was trying to explain to me how to read a dial caliper and he was making zero sense. Anyway very informative!
@GetRhythm20115 жыл бұрын
Thanks Steve. I have to periodically revisit this or similarly descriptive videos on reading an analog caliper if I don't use it enough. I appreciate your uploading a clear, helpful video.
@terrym.6829 Жыл бұрын
Great explanation! Thank you. I really like using the traditional dial calipers that my father gave me. He was a machinist for 40 years. They keep my brain thinking and I definitely need that! Lol
@rockd8946Ай бұрын
Have for for nearly 20 years. Very helpful. Only 1/2 wsy knew how read it.
@macculp9813 жыл бұрын
Terrific, straightforward description. Thanks so much for this video.
@slimhavoc42904 жыл бұрын
This is the second video I watched about this and both were awesome and helped me understand a little bit more about reading these. I start a new job tonight and I have to learn how to do this. Great vid my guy
@thermonuclearwarfare5 жыл бұрын
You should include the numerical representation of one of your identified measurements using the dial caliper so that the audience is able to record this type of information accurately.
@DangerousDaveyBoy3 жыл бұрын
165 thousandths is literally just 0.165. 1 inch and 15 thousandths is 1.015. 100 thousandths is 0.1 (0.100)
@cutweldngrind5 жыл бұрын
I have a12" digital one like yours and today our boss brought in some Starrets with dials and no one knew how to use them. Calibration papers showed their accuracy but I was trying to read a .875" just using dial. Thanks for the video and can't wait for noon to give it another shot.
@alexmacias42285 жыл бұрын
Thank you! You explained it much better!
@Ferd19216 жыл бұрын
Great video.
@katiemwah4 жыл бұрын
Lol I have to use these in school And I dont like listening to my teacher Helped a lot lol
@minskmade2 жыл бұрын
great video..nicely shot footage..informative.
@nahniIslam5 ай бұрын
Great video thank you so much
@mr.nobody68 Жыл бұрын
I showed this to my dad (Retired Tool & Die maker with mostly Aerospace and Defense experience). He said to tell you that you did a nice job but, calipers aren't as accurate as an inside micrometer, outside micrometer, depth gage, bore gage, etc. But I would argue that this one tool replaces several hundred dollars of not thousands of dollars worth of single purpose tools lol
@austins.24953 жыл бұрын
I just grew a couple extra chest hairs from watching this
@amaurynegron42803 жыл бұрын
Exelente teaching , the best among the others , in KZbin , Gracias-Thank you Amigo!!! @ 74 I dot not know how to read a rule - its not Okay-Abril 14-Miercoles 2021 Bronx, N.Y.
@richarderamirez59093 жыл бұрын
Great explanation!
@Lecandotnet3 жыл бұрын
Thank you for teach us how to use a good micrometer, I viewed 3 video clips but no one show when a device was bad, my micrometer will not pull more than 0.25 inch long, it stopped at 0.25" and stucked there. Can you show me how to work on it after i unlocked it by turned the top screw beside the dial counterclockwise. Thank you.
@MartinFluteCompany3 жыл бұрын
Most helpful, thank you!
@rizalgarcia21945 жыл бұрын
hi could you show me how to use the caliper in finding the center rear and front sights?
@bigjohnkyle16 жыл бұрын
Fantastic
@kevinsay24922 жыл бұрын
Thank you so much!👍
@TrueAfricanHero3 жыл бұрын
THANK YOU! I nearly killed myself trying to measure with these.
@macheteolivera45292 жыл бұрын
I never knew what it was for my dad had it laying around the house
@Ketan16947 жыл бұрын
In India, mostly metric system is used, dial verniers are of Mitutoyo make mostly!
@coreymerrill32572 жыл бұрын
I had the rcbs rock chucker supreme single stage loading kit , purchased with the new release of speer loading manual#14 .the dial caliper had a vernier scale on top. How do we compensate for it's loss on digital calipers? (And new dial calipers by the look of those .)
@TINTEDPR1VACY4 жыл бұрын
Thank you
@johnlane75035 жыл бұрын
really informative
@onmyworkbench700026 күн бұрын
The batteries don't go DEAD in dial calipers
@futurewarlord992 жыл бұрын
0:15 why does that metal part look exactly like a memory stone from No Man's Sky?
@sagnik253 жыл бұрын
Nice❤️
@kenwilhite60882 жыл бұрын
Dial caliper and digital caliper are the common terms used by machinists
@robertmccully27925 жыл бұрын
i wish they had a mode that read in 1/16 grads. only or 1/32 grads and so on.. not all drill bits for instance are exactly 1/16... so your not sure where you are in scale.
@davidtrevi29143 жыл бұрын
Succinct. Thank you!
@techmouse.6 жыл бұрын
But what is the gap near the base of the jaws for? And why are the jaws tapered at the tips?
@2hopskipjump26 жыл бұрын
My guess would be to measure something in an awkward position and also something tapered?
@Euragone684 жыл бұрын
I bought the Hornady Steel Dial over the Digital because of all the poor reviews for them....
@mafosa85192 жыл бұрын
i dont trust those digital ones!..
@lazarusreddog10873 жыл бұрын
When you decide to make a video showing a small printed numbered scale, for gawd's sake use a camera that can focus on small print.
@matthewalford27628 жыл бұрын
FYI.... Just get digital calipers... Problem solved!
@kc5hgv8 жыл бұрын
Sometimes that is the problem the tools think for us and gives us the data on those displays. Like in school years ago we never had calculators in class until I went into my Electronics Training School. When I say years ago I mean in 1980 the year I Graduated from High School.
@AK995816 жыл бұрын
Shorty454 It's not like reading a dial caliper requires that much thinking. Yes, you should know how to read one if you're doing any kind of precision work with metal. But the digitals are quicker, and now many of them come with a fraction setting, so you don't even need to convert the decimal to the fraction anymore. Some people might think that's lazy, but it's a time saver. Work smarter not harder.
@danielvictoria17255 жыл бұрын
Why why why inches there are so many issues. All the world is metric. To many lives are lost because they mix imperial and metric
@Get_Splooshed5 жыл бұрын
Daniel Victoria, then buy a metric dial caliper.
@somethingtrulyhorrifying5 жыл бұрын
@@Get_Splooshed you just told that guy to drink bleach
@GetRhythm20115 жыл бұрын
@@somethingtrulyhorrifying LOL!
@leftcoaster673 жыл бұрын
Because US is the #1 ammo and firearms sales. And everything is in imperial units, like grains in a bullet, and case measurements in inches. Ironically if you go to Hodgdon Reloading data they do list measurements in metric.
@gregbumgardner3006 Жыл бұрын
They are just as exact as a digital, plus a dial models has no dang battery that doesnt last long.