✨ Miele Dishwasher F-70 - Leaking - Find the Leak and FIX IT👍

[@pierombon]

I found it Scott, O-Ring seal of the water inlet solenoid valve . I just order one. Perhaps Scoot is a good idea to make a video about that > Thanks keep up the good work.

[@QuickAndEasy5MinuteAppliance]

Nice job, you figured it out😊

[@rebilly7]

Hi Scott, What a champion you are mate. I had F14 error motor impeller full of crap. Fixed..... Then I got F70 error so fixed the problem hose, I hadn’t clamped it properly then put dishwasher up on two blocks of wood. All working good. Cheers mate..... Happy wife happy life😀😀

[@QuickAndEasy5MinuteAppliance]

Great job Bill, I’m proud of you😊😊😊

[@andrewrudge5652]

Thanks for your video, I found my leak alright, pump hose connector perished. Our unit is 12 years old and still looks brand new but parts of it are rotting away. I didn't have the regulation amnumision boxs, so I used blocks of wood and got it high enough to work under and managed to re join the rigid hose to the pump with some automotive hose. Something worth a mention, I laid the machine down onto a thick blanket ok, but when I lifted it back up again i snapped the front leg clean off, worth looking out for. Thanks again from the UK.

[@QuickAndEasy5MinuteAppliance]

Nice job Andrew😊

[@maxwang2537]

That’s unusual. Those legs don’t seem that brittle. Nice job of you though.

[@jonappleton100]

Thank you. As per "humanati"'s comment: No disassembly needed, tilt dishwasher forward and any liquid in that area will leak out, and then it worked. My leak was caused by the top sprayer becoming dislodged and presumably flooding into that lower section, I clipped the arm back in, still F70, but tilting forward fixed the problem.

[@MegalaKas]

Thank you so much, it worked for me as well. Got panicked initally as mine has just crossed 2yr warranty period, titled forward and water and some glass chips also came out, and then it worked. Thanks a ton.

[@gplusgplus2286]

Very nice, I just finished repairing the broken impeller and want to see if its leaking, this will help. Had F78 error.

[@Jedda73]

Just a heads up, for G1xxx/G2xxx series Miele dishwashers, according to the service manual you should only tip them up onto their back, and never on its left side or the brine tank will leak into the cabinet.

[@QuickAndEasy5MinuteAppliance]

Thanks so much for the info.👍😊

[@chanelleregnault1587]

Okay so I tipped mine on the left hand side prior to reading this is there anyway to balance it again or anything? Thanks Scott I did your F14 error video and now gotten a F70 error code. So I'm hoping I can fix it. My hubby wouldn't do it so I took the initiative and now I have this code haha. I want to prove to him I can do it!

[@Jedda73]

@@chanelleregnault1587 Looking at the diagrams it looks like brine can fill the water diverter and enter the cabinet. So you would want to do a couple of quick rinse cycles to clean it out. And if your have any leaks underneath, then clean the brine off with water to prevent corrosion.

[@jjhh9993]

Has helped me big time today. Thank you! 🙂👍

[@QuickAndEasy5MinuteAppliance]

Thank’s So Much, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/GpInAejvpfVVE4FHB_L-Dgjoin You’ll get Live Appliance help when ever you need it. It’s just $5.00

[@petrahprinsessa]

Worked for my Active SC, thanks!

[@QuickAndEasy5MinuteAppliance]

Thanks so much Petra❤️👍😊

[@JaapH]

Just removed the frontpanel and found out there is some water under the dishwasher. Tried to move it forward to find the hoses are too short to get it out completely. Dried the little amount of water and started a short program to allow the dishwasher to empty the water inside. If it still malfunctions I need to get longer hoses to be able to test it outside of the cabinet... BTW excellent video

[@JaapH]

Checking the sink cabinet this was pretty wet inside. The cause was a hose connecting to a small boiler with some kind of valve and that hose was full of *** and wet on the outside. Cleaned and dried the cabinet and cleaned that hose. Must have been the reason for the water to fill the dishwasher reservoir. #fingerscrossed

[@QuickAndEasy5MinuteAppliance]

Can you send me an email at [e-mail] so I can give you more detail on the fix?

[@rkchu1]

Thanks. Sucked up the water, F70 code gone and pump stopped running constantly. One tip is to use a tool from an auto parts store that removes excess coolant.

[@QuickAndEasy5MinuteAppliance]

Great idea Richard, Can you post what type of tool from the auto parts store that you used?

[@rkchu1]

not sure what it is called but it has a long tube and a rubber ball at the end that is squeezed to suck up coolant. I may have purchased from Walmart. Turkey baster may work also.

[@maxwang2537]

Do you mean sucking up the water from inside the dishwasher or in the bottom pan?

[@rkchu1]

@@maxwang2537 the bottom pan although it can be used for inside the dishwasher as well.

[@reecewarren7468]

Thanks Scott. This worked well and I now have a happy wife.

[@allencedano9328]

All I did was clean out the filters and I must admit I did run a cycle without the siphon filter

[@QuickAndEasy5MinuteAppliance]

Awesome 😊

[@pierombon]

My miele dishwasher is going through a cycle now standing on 2 wooden boxes and is well balanced. Done one cycle no leaks. When I took off the drip pan was wet and rusted . Must be a very small leak.... any ideas?

[@miguelpeinadovonwinckelman7486]

Hi! Thanks for your video! The solution works perfectly well!

[@QuickAndEasy5MinuteAppliance]

Awesome, Thank you

[@dannywenzel3890]

There is a square exit chute on the bottom of the circulation motor. Do you know why it would be leaking from there?

[@dannywenzel3890]

I should read the comments first. Maybe I need the partition kit.

[@QuickAndEasy5MinuteAppliance]

Hi Danny, A new partition kit will fix it👍

[@piotriwanicki8548]

Thank you very much. ... from Poland.

[@QuickAndEasy5MinuteAppliance]

You’re welcome👍

[@kosmaskatshs9790]

Thank you very much, I appreciate it!!

[@benwolf3580]

Fab video.

[@QuickAndEasy5MinuteAppliance]

Thanks so much 😊👍

[@garrybarling3923]

Great video - easy to follow - well done!

[@QuickAndEasy5MinuteAppliance]

Thanks Garry

[@michellec3100]

F70 and water dripping from the circulation pump square opening underneath. Unfortunately cleaning out impeller of circulation pump (so happy to find a small plastic piece), vasiline rubbers, tighten everything, did not do the trick. It continues to drip at the circulation pump. Do I need to buy a whole new pump (I disassembled twice and got together for testrun, I can do that) or just a particion part? Or a new dishwasher? It's expensive Miele, 6.5 years old, not happy.

[@QuickAndEasy5MinuteAppliance]

Hi Michelle, You’re doing great. Just need to replace the partition kit. You can call Miele USA and have them send you one👍

[@dannywenzel3890]

I have the same issue!

[@michellec3100]

@@dannywenzel3890 I needed a new circulation pump in the end.... Outch, but I have to praise Miele. Due to being out of warranty but below 8years of use (Miele prides itself in quality) adjusted the price of the part very kindly.

[@gutar2]

Hi Scott, I have a Miele model that starts but then stop within a few seconds then all the program lights flash (but not the inlet, rinse and salt lights) and it beeps. I have cleaned out the non return valve and it is not leaking into the drip tray. Any pointers on it might be? My model doesn’t have a fault panel. Tom

[@LaurentLABRUNIE]

Hello, have you got an idea of the reference and the price of the faulty piece ? Regards.

[@balmoralwatersportscentere909]

Thank you

[@QuickAndEasy5MinuteAppliance]

You’re very welcome👍

[@t4nkman]

I just slid the dishwasher out & tilted it forward. Water drained out & that fixed the issue. It had flooded because of back flow from the discharge outlet. Hope this helps someone.

[@QuickAndEasy5MinuteAppliance]

Nice job👍

[@jonappleton100]

Thank you, this worked.

[@MegalaKas]

tks this worked, although I couldn't figure out what caused the prob. Machine running successfuly for the 2nd day.

[@illbwolfify]

Hi Scott, 1st of all..thank you for the tips of the video, I clean up a few places on the hose except for the parts for the water intake. That is the part that is leaking out when I ran the rinse cycle. Can you tell me where I can find the parts to replace the hose? It’s clear and right behind the motor.

[@QuickAndEasy5MinuteAppliance]

Try calling Miele USA to see if they can send you the part.

[@maxwang2537]

Great video as always. Thanks. One question, is this error triggered by the float switch on the sump pan (which if of course triggered by the water in the pan due to leakage)? I know this will turn on the drain pump. But it seems to me the drain pump is unable to drain the water in the pan. Is this correct?

[@andrewrudge5652]

Yes mate. The float switch in the sump pan is for the error code only, there is no sump pump.

[@QuickAndEasy5MinuteAppliance]

You are totally correct👍 It does turn off the fill valve and powers the pump non stop. If water is leaking in continuously into the tub from a bad fill valve it will pump that water out so it can’t flood the kitchen👍

[@maxwang2537]

@@QuickAndEasy5MinuteAppliance thank you. However the drain pump doesn’t actually drain the water that’s already in the pan and triggered the error code. Correct?

[@demostheniszambourides8961]

Hi Scott, I think your videos are brilliant and really helpful but I'm new on here how can I ask you a question? Do I do it on here or is there a way to email you. My float switch was activated, equivalent of F70 fault I suppose, and after getting my Miele (G 656 SC PLUS) up on bricks and taking the bottom and right hand side off I have found the cause, I think. There is this big tank on the right hand side with a solenoid on it half way up. Looking at the wonderful links you gave the tank is called the Water Intake mixer and it leaks like hell from around the solenoid (Water Control Valve, Y5) at the beginning of a run. I took the solenoid off and you are then left with this plastic probe looking part that twists and comes off. I have taken it off and there is a big black rubber ring which looks ok but is that the cause, if so what do I do? Can I just put vaseline on it or something else or do I need to replace the probe part or the rubber or what? It also has another rubber small part, which looks a bit scaled, could it be that? Can I get these individual parts or are they supplied with the tank part? Help please

[@QuickAndEasy5MinuteAppliance]

You can reach me at [e-mail]

[@MrRzhevskiy]

Рециркуляционный насос потёк

[@secureguard673]

thank you

[@QuickAndEasy5MinuteAppliance]

Thank’s So Much, I’m so glad it worked and saved you time and money 😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/GpInAejvpfVVE4FHB_L-Dgjoin You’ll get Live Appliance help when ever you need it. It’s just $5.00