Quinn 1/2” Drive Torque Wrench | Harbor Freight

[@johnfoster4091]

Was it me or did it look like he went right on past torque, like it's some kind of suggestion.

[@stevenbrindisi4719]

Definitely went over 5-10 ft lbs with that. Good thing it's lugs and not head bolts. Lugs don't care as much.

[@MarkWilliams-vp7xw]

I think the sound and picture aren’t synced

[@mosthated8190]

The sound and picture are not synced. You can hear the sound of the socket on the lug nut before he actually has it on there physically.

[@simba0186]

Just purchased this item!!! Looks very promising... Thanks Harbor Freight/ Quinn 😊

[@Rmac335]

I like my split beam.

[@Ceedub3406]

If you made a 3/4" drive version pre set to 475 lb/ft you would make a killing with truck shops

[@David..]

Also jiffy lube. Would help them from over-torquing drain plugs and oil filters.

[@jakeleslie97]

lmao so true @@David..

[@OlehMelnychuk-rg1wl]

They make the best torque adapter in 3/4, it works great with their telescopic 3/4 ratchet. For $140 you have a torque wrench for semi tires.

[@dailydoseoftoolreviews]

Do the handle locks in place once you set the desired ft. lbs. Cool you don't have to keep resetting every time you push on the handle.🤔

[@joshbrown3536]

yeah until you realize right where you put the base of your palm drives the release out and you have to keep resetting the torque setting.

[@J05hFontenot]

Yeaaaahhhh ... Try to have someone who knows what they're doing demo your tools... This guy went past the "click" that indicates the correct torque. If it was set to 100 (typical Ford car), he went to about 115

[@charles17508]

How do i get 150 if i use this any ideas?

[@johntran7432]

How do you set to 90?

[@Blake_Guajardo]

Point the needle between 80 and 100?

[@johntran7432]

@@Blake_Guajardo i returned it because you can’t set to anything else besides the ones specified on the label

[@Blake_Guajardo]

Oh I got you they sell a digital adapter that hooks to your regular ratchet its the same brand and its actually pretty cheap for what it does. Look into it

[@shah_rulan_war5460]

Macamana nak order.?

[@David..]

“Hey bill I’ve got this great idea…we take torque wrenches that only cost 20 bucks and are great already and we make them worse and charge a bunch more money”.

[@roblauer9805]

Don’t like the double click…

[@tylermcelwain]

Same

[@pono321]

Love it

[@platoscavealum902]

👍

[@2-old-Forthischet]

Even the click sounds cheap.

[@repairmanmanman]

Attempts to tighten properly and records video overtightening 😂

[@Owen322]

Well thanks harbor freight you broke my dirt bike with your cheap stupid torque wrench I trusted you thanks for nothing I want 500$ to replace my dirt bike engine part thanks for nothing

[@Pennington0Justin]

Using a tool for something other than its intended would make it solely your fault.

[@DCigar]

Operator Error 😂

[@Owen322]

@@DCigar says the one with no back story it was tested by a third party and had a faulty spring in it

[@Owen322]

@@Pennington0Justin says the one with no back story it was tested by a third party and had a faulty spring in it

[@Owen322]

@@Pennington0Justinbtw it wants this exact model either something much smaller

[@tommyt370]

it says 4% off 4% of 100 foot pounds is 40 lbs (100x.4)=.4x100=40

[@derekgenecraig]

Uh say what?

[@MasterBeighter]

It's him. It's the janitor that solved the equation on the wall at school

[@OfficiaFoxDeltaGames]

4% is .04 not .4, .4 is 40% your calculation is wrong

[@ryanr3071]

@@MasterBeighter 💀

[@RedJerk5]

Are you still in school? .4 is 40%. .04 is 4%