R&D paving grading with Bobcat A770 and grader attachment

[@aaronburford5701]

I love this attachment and how the ground looks after completion! Great work!

[@johnnygosney2001]

It's nice to hear somebody say it's nice to see somebody component to see sme one operate that I like that.an u got that right I would love to try that my self most of my hours have been breaking concrete

[@absoluteidaho3767]

Great job! It’s nice to see a competent operator run one of those!

[@tylerwaine715]

Outstanding work, the grader operator is phenomenal

[@dubez3784]

it is an awesome machine. I was the one running it and it makes smaller jobs like this very easy to do and it nice because you don't need a trip axle with a tag along trailer to haul it like you would with a Huber etc. I tow it on my 28 ft Kaufman trailer with my F550. very convenient

[@shawnegger9571]

DuBez37. where did u guys get those tires, do u have a contact

[@dubez3784]

yah i get them right through our local bobcat dealer or northeast tire in belmont NH . we have them on our skids because they ware much better on asphalt compared to the stock tires . ive been getting 3 years on a set of these. of course if you have a cowboy running the maching and spinning unnesaserrily on them then they will ware sooner.

[@jalenwalshak3598]

DuBez37 do you have one that has gps thinking about getting one if I can afford it after a get a skid steer if I find one I like and big enough for what I wanna do with it

[@dubez3784]

@@jalenwalshak3598 no I dont have the GPS setup , I've been thinking about getting it because then o could do laser grading but it's pretty damn expensive and we own a huber grader and a Cat 120m road grader so I dont think it would be as of much use for me

[@jalenwalshak3598]

DuBez37 I’m thinking about getting into driveway building and that grade for skid steer wood be perfect for me to get started till I can buy a big grader. How do the controls for it work?

[@MtsgroupltdUk]

Great piece of kit! It makes the job look easy!

[@paraflamdragonruff9487]

Great work, pleasure to watch.

[@الحمدلله-ح8غ3ش]

لا اله الا الله🌸

[@davidmurray3665]

Great job. I’ve got a 96in on a T870 and love it

[@cat637d]

Great job on your project, it looks like the all wheel steer machine is perfect for that attachment. I have a T595 and it is only rated by Bobcat for the smaller grader without the power moldboard shift. I should have gone up to the 600 series machine. Didn't do enough research on the products, dammit!

[@dubez3784]

cat637d thank you . yah it really is perfect , it doesnt destroy the grade at all and allows for smoother turning . we own 2 of the A770 all wheel steer machines and i love them , wont own another skid, tons of power and very fluid.

[@flienlow6281]

@@dubez3784 Does the all wheel work as good as a track? Im trying to figure our what to buy as my first machine?

[@dubez3784]

@@flienlow6281 it depends on what u will be doing most with it. I do a variety of projects with this machine from tear outs , grading , shoulder gravel with our road widener to just working around my paver cutting joints ect. if it is strictly for gravel applications I would say the track would be a bit better but if u do a variety of things the all wheel steer will be better. the big benefit is u can drive on landscaping and newly paved areas with leaving a damage , it's a pretty impressive machine.

[@hakeemsd70m]

Sweet! I'm not going to lie, I wasn't even aware it was such thing as a grader attachment, very cool. Great operator. Is there anything a Bobcat Skid Steer can't do?

[@skidlyane]

Отлично с планировкой справляется👍. На устройстве откосов видимо не сможет работать.🙁

[@robertharrick290]

Looks like your doing a nice job. I have run a Huber for many years and am thinking about one of these. I like to look at the bottom of the back of the blade on either edge to see what I am doing, can you see the that with this blade? Thanks

[@dubez3784]

you can a little but you have to lean forward a bit in your seat but that is what I do to run it. I know have a slope level mounted on it instead of the level u see here . really helps with getting the pitch right.

[@gregreaves]

That's a nice attachment

[@dubez3784]

thank you. it's so handy for the small jobs like this. I also have a huber and cat 120M road grader .

[@gonzalorodas8294]

Cuánto es el valor de una minicargadora con todo su equipamiento

[@itz-gill5375]

Good job

[@toddthomas4542]

Looks like it’s all right for final grading let’s see it cut and fill

[@dubez3784]

Todd Thomas believe it or not it can push a lot of material . it has no problem cutting but it would be nieve to think it would cut like a full size grader

[@dubez3784]

that's also what dozers are for .

[@동원포장중기]

attachment how much can I buy ??

[@joegalina3158]

Hi... is the grader blade 96" or 108" I been thinking about buying one for my cat 299c it's 11000lbs machine and should be matched up with the 108" blade???

[@dubez3784]

Joe Galina its a 96" blade . make sure you get the one with slide function also , it comes in handy when grade around stakes , etc.

[@joegalina3158]

DuBez37 thanks for letting me know I'm going to contact bobcat of NH next couple days or so

[@dubez3784]

Joe Galina good luck , you will love it.

[@Jjason601]

he is good as me...... good job

[@magamotors3770]

Техника для людей! А у нас делают для того чтобы людей поставить в позу

[@rakshithkumar6306]

Its price

[@ootsam]

Do you run this with the arms in the float mode?

[@dubez3784]

ootsam no u run it with the arms all the way down and use the curl to adjust the pressure u put on the front wheels. you want minimum down pressure on those front wheels . if u were in float it would make it tough to be accurate with the blade.

[@pearllllllll]

The front grader wheels Or The front skid steer wheels ? I'm feeling, it's the front grader wheels your speaking of

[@raul_A2b]

Motor grader terancam di saingi

[@andresa-e757]

Eso lo hago yo con el balde original

[@dubez3784]

I've been running skids and graders for 22 years and for smaller driveways and small areas the bucket is fine especially if you have a tilt tach attachment but for a parking lot this size there is NO way anyone can accurately grade the cross slope with just a bucket

[@domdomdabobcat8934]

Show cara top

[@hvguy]

brand new $11000 piece of equipment... needed to hot glue a level to the top lol

[@dubez3784]

Hvguy its for a reference , i now have a slope level mounted on it. it helps for reference when you are grading tight areas. i also run a cat 120m grader and a huber grader so i know what im doing .

[@dubez3784]

Mojo yah i could see that bubble easily so i guess i am super man.

[@pearllllllll]

Priced one in Australia yesterday $ 23.5k

[@geovanisousa4280]

SHOL DE BOLA

[@rahulkhushboo9661]

I am bobcat op

[@mshashavali7065]

I'm bobcat operator, I want bobcat operator work

[@Blougheed]

so youre not a bobcat operator.. just a guy who knows how to run a skid steer.

[@albertjones6176]

Work more, bobcat less my friend 🍤

[@alexterlizzi8080]

Lol dude can’t even grade there’s so many belly’s in that and god knows the pitch is probably so off cause that level bouncing up top is doing nothing lol

[@dubez3784]

you know absolutely nothing . I sure can grade , I use this grader , a huber grader and a cat 120M . the pitch came out perfect , all had to flow to lower corner near the escavator .

[@kirkniles4184]

Always going to be a hater....

[@pearllllllll]

The level I see Definitely keep you in perspective with things An extra reference

[@dubez3784]

@@kirkniles4184 always . And it's usually the people that have no clue and have never done the job they are hating on