R Link 2 Developer Mode Activation Tutorial | Renault R-Link 2 Debug Mode

[@eaglestu6639]

There is nothing wrong with your English. It's pretty much perfect

[@MicheleP]

thanks!

[@wall-e7179]

Thank you. Two things to make my megane perfect are how to start car in Perso? And get rid of annoying Privacy/Data warning every time?

[@giovannitropiano5615]

Thank you for your video. Do you know if in the developer mode you can set the windows to automatically close when the car is locked?

[@michalkmet9456]

Hi Michele. Very nice video! Do you think is possible to change side mirrors open/close adjustment by this way? On my KOLEOS 2017 if I want to use KEYLESS I only have 2 possibilities: manually close mirrors by push the button on the driver's door or mirrors are always closed with locking the car. And always means always when I move more than 1m from the car or when I go around the car in front ...

[@saca277]

Can i turn on/off all of staff from DOT4ALL in yours videos, in this developer mode same? Start/stop turnig off, video in motion, cornering lights, seat belt warning, park assisten on dashbord? tnx

[@MAIKL1777BB-7]

Hey! Please tell me how to enable the "fuel used" item on the Renault Kadjar on-board computer.

[@oldhiphop2]

Did you find solution?

[@jackmok]

Hi. I just got a second hand Grand Scenic IV Bose edition with R-Link 2. I realized Bose edition multimedia sound setting is pretty much only Bass and Treble adjustments whereas non-Bose version got more adjustments such as Bass/Mid/Treble, bass boost, ambience etc. can going into this developer mode change that? Thanks.

[@משהשימי-צ8ו]

Hi Michael, I saw your explanation about the video and I wanted to know if you could help. I accidentally clicked on strong display mode and I got a black screen. What can I do to get the screen back?

[@philiplemmer7886]

Hi. Good video Have a older model Kadjar. My radio has this very annoying thing where it changes the station for no good reason. I think it’s the Auto Frequency, but it’s not that the signal is bad of the station I listen too and it doesn’t even change it to the same station. Can I disable the AF in debug mode. I’ve contacted Renault and they pretty much told me that they have take away the button of switching it on or off in the menu and have no intention of putting it back.

[@napoleon8017]

Hi, can you change engine sounds through developer mode? I mean other than sport mode that comes with multi sense

[@alexm.6549]

Awesome discovery! can we modify the behaviour of multisense driving modes?

[@pedrosantos10]

hello! I have a doubt that maybe you can solve. my car didn't have the leds on the center console, but I bought the trims from a car for parts and I've already confirmed that they fit, my car also has the connection prepared but when I plug in the plug, the leds don't turn on, I think I have to unlock something in the multisense for the car to recognize the new leds, do you have any idea what the option is? maybe in developer mode? Thanks for all the tutorials, very helpful!!

[@dimitrismoudatsos2912]

By going into the developer mode, can you install apps such as APK which is an app to use a usb apple play dongle? If yes, how you install the app which is not part of the Rlink 2 store?

[@djr30f]

Thank you very much for the tutorial, it was very helpful! If you found a way to turn off the AF (alternative frequency) in the radio, please share it!!! It's very annoying and I cannot find a solution anywhere.

[@sasacapunovic2862]

If you mean AM frequency mode, there os an option in the r link menu to switch AM off. No need for any devices.

[@wogs8610]

Hi How do i make the sport sound of the engine work through the speakers. It has sport and comfort mode but it does nothing to the sound. Megane GT

[@SchimeHr]

I like to know if is it possible to add more display designs in front (display stills)

[@sebiregelt1666]

Hello, I have a 2019 Megane 4 RS Trophy, is it possible to activate the R.S. Vision Headlight, always, like the C-LED? Thanks

[@plasi1]

Can you activate rear camera in Developer mode?

[@alexandrecarneiro6844]

Good night Michele. I have a megane 4 from 2017, GT line, I am a beginner in software update I made a serious mistake. I had version 3.3.986 I updated to version 9 but that version was not Megane, Now I have no sound in the reversing camera software Android auto interior led lights of the doors and mirrors blink in short, everything is atrophied, I ask for help please There will be no way to reverse this situation Sincerely: Alexandre. Thanks

[@juanjo1093]

Good job!!! Do you know how to activate R.S. Monitor in Megane IV ST GT?

[@JmsOL007]

Hello everyone, i just bought a 2016 Megane GT Line, but there is only 1 instrument style no matter i chose Sport, Neture, Eco or Comfort mode, is it possible i could unlock the display options so that i could read the rpm when driving, much thanks.

[@FABNPG]

Recommended OBD2-adaptor is no longer available. Could you recommend something else (maybe newer/beter)? Thanks in advance.

[@pamarque66]

I have a bose edition 2017 is any actualization can b fone to get equalizer better. I mean at least bass, treble, mid.

[@davidbrawn4280]

Hi, great video, does this work for Renault Easylink 2020 display cheers

[@ricardolopezcelani]

Hello, thanks for the information. Of course, sadly I've pushed HIGH in a 7in landscape screen...and everything went black and not working. Any idea or recommendation on reverting it back ?

[@mehmetunkun]

Pyren Macro

[@ahmetasker6797]

Hi Michele, CarPlay possible gen 1.1 ??

[@jorgevilaca3162]

Hello good work just one question is ther some parameter that I can cancel as my car when approaching a cross point o the front car the music goes lower. I Renault deals I have left car 3 times they can’t find the problem.

[@sebpro2874]

Nickel, fonctionne du Premier coup !!!! un grand merci

[@maherhamdan897]

Thanks for the turtoria> I have a question where I couldnt find an answer for and I have called Renault Netherlands today and they couldnt provide me with an answer... My question is: I have Talisman 2018 with massage function in the front seats but this function works only for 10 minutes a time. could you find anything in the settings to set the time to unlimited instead of 10 minutes?? I would appreciat your reply

[@RickWilleme]

Looking for the same thing in my Megane. Have been searching in DDT4ALL as well, but so far haven't found a value to extend this yet.

[@MohamedKhaled-qo4lo]

Do we have force brake lights or dynamic brake lights in the megane 4? With ABS the brake lights blinks

[@hawar8516]

Hi, I have Koleos but network not avialable, any suggestion plz.

[@darrenmitchell8630]

Hi, I have set myself up with ddt4all and a WiFi link, would it be possible to show me how to enable a reverse camera with ddt4all on a Kadjar 2016 please

[@MhedYaseen]

Hi, any option to activate memory seat function? I have electronic seats as stock for both driver and passenger, but profile does not save settings. Mine is a Koleos 2022 LE

[@coolshekuhere]

Hi..i have Koleos 2018. I tried this method and enabled my Apple CarPlay and Auto Android as well but unfortunately CarPlay is not working. When I connect my cable to the phone it connects and disconnects in cycle. Do you have any idea why would this be ? Do I need to change usb socket for this/

[@coolshekuhere]

@tdwt so finally I found one USB on eBay and ordered ( as it’s very costly from Renault). Changed and boom! Now it’s working fine.

[@Spinnal]

My koleos 2018 does the same after I enabled Apple Carplay. What is the model of usb ports your order from ebay?

[@Spinnal]

How I can revert the modifications to avoid changing the usb ports, I disable CarPlay and Android Auto using debug mode again, but the SmartPhone Integration option still apearss on RLink Screen (it was not there before the change). Any advice?

[@ersukhwinder98]

Hi, I want to know that what will happen to the car system/ R-link 2 after replacing the battery.

[@thiantheunissen6962]

Hi MicheleP I am not able to get into developer mode at all, nothing happens. I have a 2018 Kadjar. Are you able to assist?

[@kingroe12345]

Do you have an idea, if you can activate the "open windows with remote control" feature? I have the megane 4 and I'm not able to open the windows with my remote control. I don't even know, if this is possible at all with this car model.

[@MultiTiagofreitas]

Hello Michele, from Portugal I have enjoyed very mutch your videos, and help me to understand more of the R-link 2, i just want to change the display ambient color, its a high risk to do it? i have a Renault kadjar B.Edition 2019. Gratzie

[@rhyslongstaff3715]

I have a RS iv Megane 280 but when I got the car there was no RS monitor installed onto the R Link. do you think that it could be installed

[@TheRapAddiction]

is there a way to reset the r-link 2 to factory set on the Developer Mode?

[@robertdupil7780]

Do you now if an 2015 kadjard has android car play ?

[@marciopinto2691]

Hello I want to turn off the start up help, that moment when the car brakes for moments until starting, is it possible with the developer?

[@robimare4582]

Thenks , CarPlay is it possible to run?

[@andresleonromero5207]

Hi Michele, thank u for this tutorial. After I have entered in developer mode, the image of rear camera has flipped, and don't work of control voice. This is normal? Best regards!

[@hirayaman246]

I dont have R-link but i enjoyed it - your vids helped me a lot !

[@MicheleP]

really appreciate it man! Buy a Renault Megane with R-Link 2 😜

[@hirayaman246]

@@MicheleP Nah, too much high tech and gadgets for me- i only need an engine, transmission ( manual) and AC....and lots of power....

[@MicheleP]

Toyota Supra is the answer!

[@hirayaman246]

@@MicheleP Im more of a sleeper kind of guy 😉

[@hayatikorkmaz2549]

Dear Michele, Thank you very much for your reply. What I actually mean is remote engine start not by phone or internet/Bluetooth but keyless entry and start with the Renault hands-free card itself. Do you have any idea how to start engine with the card? Exp; @ Kind Regards

[@MicheleP]

Well, this is way too much for me, I really don’t know this!

[@Spinnal]

Hi, How Can I Disable the Carplay option on Koleos 2018? I did the tutorial but after activation of carplay when I connect the usb port to the iPhone it connects and disconnects in cycle. I enter to debug mode again, but I cant find any way to get it back to the original state.

[@jeanjacquesdaniel3835]

Hi.is it possible to do the same tringle on openr link renault austral. Thanks

[@MicheleP]

Austral unfortunately is locked. Still locked

[@rldchua]

hi, thanks for the sharing of this video. Though I've not tried it personally but I will like to ask about the features in thief mode when you go into the engineering mode. Also, is it possible to activate the LDW, etc from here? If yes, where do I click and go to?

[@MicheleP]

ciao! Thief mode it activable, but if you don't have the additional module it won't simply work; LDW works with the front camera, if you don'0t have it you can0t activate it

[@lauvlad979]

Hi Michele! Have a 2020 as you wish😀👍 It is possible to change the welcome sequence from Developer mode? (....how to?). Best regards.

[@too_bad]

Hello, thanks for video. Do you know if it is possible to turn on distance warning ? I've tried turn it on with radar, but nothing, should it be used with camera option or it is not possible? p.s.distronic can read the speed signs, so distance warning might be possible to turn on. thanks

[@MicheleP]

for turning on distance warning you must have front camera and front radar, otherwise is not possible

[@too_bad]

@@MicheleP clear, thanks.

[@claudiocla375]

Ciao complimenti per la descrizione,volevo chiederti se sai se c'è la possibilita di attivare la presenza del gancio traino (rimorchio) in ECU ?grazie

[@dusandravinec9587]

Hi, Michele Is possible activate update on R LINK 2 on Espace 2016 from 2.19.300 to 11.344? Is maybe some update from 2.19.300? Thank you.... Dušan from Slovenia

[@ВадимЛипай]

hello. Maybe you can help me - I would like to reprogram my ECO button so it can activate sport mode instead of ECO mode But I can't find the right function. Can you tell me how I can do it?

[@elgrecos1]

Hello. I need to change landescape to portret same time with change of display. Is posible to make this în debugmode? If i cheange to portret mode (in 7") after i put the 8.7inch display? Operatione: cheange display 7 to 8.7 inch Tnx.

[@fmsousa75]

Hello my friend. I have 3.3 version on a Renault Talismam, now when I tried to change the motor noise configuration not knowing that is only available for version 7 and superior, now my Talismam is showing Renault Espace instead of Talismam at Multisense sistem... Can you help me?

[@gonzfer07]

I have the same version that you have and I need to change to activate carpley, it is possible?

[@andrejzuzic1488]

Are there somewhere to activite revrse camera?

[@consultingsmart7383]

Hey sir. Thx for information. i entered develop mode. and i touched " high" by mistake. Screen is been black.. how can i solve it.. Help me sir..

[@frazier6565]

Was you able to get this sorted as I pressed the MID display

[@consultingsmart7383]

@@frazier6565 i did at service center

[@davyd2449]

Really like your videos! Thx for all the work and information 👌

[@bensonteo2489]

Hi, thanks for informative video. Can I check if it is possible to deactivate Stop and Start via developer mode?

[@MicheleP]

Nope, unfortunately some ecus are not reachable via developer mode

[@abdouazennoud8579]

it's work if we install a program in phone ??

[@m-dizzle4827]

Hello michael... I wanted to ask about the ACC but readin the comments i got my answer 👍 but i have the function blind spot warning in the diagRW does this mean i nead to get the side mirrors with the indicators, enable it in diagRW and it will work??

[@MicheleP]

Hi! For the BSW (blind spot warning): it does not depends on mirrors, but it depends on parking sensors, you should have the automated parking sensor (it’s six sensors on the front and on the rear bumper); if you have only 4 (normal park assist sensors) you will not be able to have BSW

[@ingenierocarlosenciso429]

Alguna forma de retraer los retrovisores por esta pantalla?

[@joseantoniomartinbayon6501]

Hi Michele, puedo pasar de la version de RLINK V3 a V7?, puedes indicarme alguna pagina donde lo expliquen?. thanks

[@k.6707]

hi my screen rotated to portait mode How set to landscape mode for megane iv v2.2 rlink 2?

[@hisham7g]

Do I have to do this to play android Auto?

[@pashnyovv]

can I disable auto holding rear mirror in kadjar 2017?

[@exception021]

Thanks! I just turn on video in motion on my renault scenic IV :)! PS: Android auto doesn't work with my R-Link... Can I set it somewhere in developer mode?

[@MicheleP]

hi nikola! which version of r-link you have?

[@exception021]

@@MicheleP Hi Michele! In a meanwhile, I made it :). I found where I can set Android auto in developer mode. Thanks anyway :)

[@adrianchitic4421]

@@exception021 hi,can you please share with us how you managed to activate it ?

[@sherwaneagle3439]

Hello, how can I activate Apple CarPlay in my Renault talisman 2018?. Thank you

[@ritchiejrijan8726]

Can u activate carplay with this?

[@luhecamu]

Very good my problem with CARPLAY is finish, thanks so much.

[@frazier6565]

Hi my mate tried this and accidentally clicked on the display mode the option on the right now the display has gone black any idea to fix this ?

[@markneale3050]

Hi Michele, great videos. I have replace the 7" screen in my Megane Mk4 for the 8.7", I have changed all the parameters shown on You Tube but the display is still in landscape but you have to tilt head 90 Degrees to read it. Also because it is still in landscape I can't access heater controls. Can I use the Developer Mode to fix this problem? Thanks in advance

[@yany1440]

Same here, can you put here a link to KZbin link we're you find the parameters?

[@michelvespucci]

Buongiorno, con Debug Mode c'è un opzione per aver il logo stazioni radio ? Perche posso vedere il logo con il DAB ma con tutto lo schermo et non e interessante cosi. Altra domanda, possibilita di fare funzionare CarPlay senza fili ?

[@alexdemichele1757]

Buongiorno michele! Per eseguire questa modifica relativa al vedere i video in movimento occorre solo l’utilizzo di una chiavetta usb con i file creati secondo descrizione? Nel senso non c’è bisogno del programma ddt4? Per precauzione anche se sembra un passaggio veloce è meglio premere a lungo il tasto start in modo da mantenere acceso il display? Grazie mille!!!!

[@MicheleP]

Ciao Alex! Tu per precauzione tieni sempre il quadro acceso! Che non si sa mai; comunque si, DDT4ALL non serve per questa procedura, basta creare il file da mettere su chiavetta, entrare in modalità sviluppatore e mettere permitted a video

[@kamilgawgun5153]

Hello I would like to ask if it is possible to unlock the ambient lighting function. I have a Talisman without ambient lighting , but now I have installed it. Could I ask for some instructions on where to run it ?

[@MicheleP]

It’s under the audio cluster. Quite long to explain. I’m preparing a dedicated tutorial 👌👍🏻

[@kamilgawgun5153]

@@MicheleP Thank you for your answer. In that case, I'm waiting for a tutorial about ambient lighting

[@MrYeo87]

Can I check whether can I enable the lane departure warning function from here?

[@vaughanza]

Thanks for another awesome Video and may 2020 be great year for you

[@MicheleP]

thank you very much! i wish a great 2020 to you too!

[@ferrybel2472]

Nice. I'm not going to use it, but it was nice to see.

[@MicheleP]

Who knows 😊👍🏻

[@ChevyOp]

Do we need to put the USB into the car to recognise it first before creating those additional files?

[@MicheleP]

Nope, you don’t need the car footprint 👍🏻

[@ChevyOp]

@@MicheleP thank you. Unfortunately I've tried and it doesn't work on my Megane IV

[@Nowyjn]

Hey. Is it possible to activate automatic cruise control if I don't have it from the beginning? Great videos!

[@MicheleP]

Hi! You need to have the front radar and the specific button on the steering wheel!

[@Nowyjn]

@@MicheleP ok. But without the button on the steering wheel maybe it will be possible to activate it from the rlink2?

[@lorenzos5704]

Hi! Do you know, if there’s something to enable full CarPlay screen (full screen, not the feature I already have Carplay chip) without updating to v.8.xxx from developer mode?

[@dinodics4442]

Hello, I don't know what chip tou have, but you can activate carplay from developer options and i had the same issue with android auto and i've found that u need v 8 to have it dysplayed on bigger screen

[@lorenzos5704]

Dinodics yes I know, but unfortunately I’m in v3 and I can’t still update to v8 😢

[@dinodics4442]

@@lorenzos5704 I'm in v3.5 too and cannot upgrade and i don't know why because id u had v2xx you can uppgrade to 7xx then 8xx

[@MicheleP]

No Lorenzo, for having full screen CarPlay you need to have version 8

[@techcraft_de]

@@dinodics4442 Could you send me a Tutorial how to do that?

[@bentoh2410]

Are you able to create a video with all the past tweak? LIKE 1) touch screen enable while driving 2) video to continue playing while driving 3) change of rlink startup

[@MicheleP]

I did, in Italian

[@bentoh2410]

@@MicheleP found it but can't understand... Was hoping u could do a English version when u are free... Thank you.

[@MicheleP]

@@bentoh2410 actually all the hacks are in english language. every hack has one video! i link you the playlist: kzbin.info/aero/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj

[@Babitc]

Hello from Greece and thanks for your great videos! I want to do all these changes to my Megane and i want to know if there is a problem to buy another obd product.

[@MicheleP]

hi, actually no problem at all. they're just not 100% guarantee to work with DDT4ALL

[@Babitc]

@@MicheleP OK, thanks for reply!!!

[@259rambo]

I hava Kadjar 2015, I cant connect my phone via Bluetooth, I have a note 9 so its not with the phone. is it possiable to do it with this to fix the issue. I have read on forums that this issue is occurring to other vehicles aswell...

[@nicost7866]

Possible to re-activate "embeded vr" ? After AAP activation i loose voice recognition button function 😑. Or should I do it whith ddt4all ?

[@MicheleP]

Embedded vr can only be activate via DDT

[@nicost7866]

@@MicheleP And in a Renault garage ?

[@MicheleP]

@@nicost7866 Yes but you have to explain why you have activated carplay or android auto when your car is not supposed to have it :)

[@nicost7866]

@@MicheleP Ok i am ready for to do it. Do you think I could activate Embedded Vr, AAP at the same time, will it works together ? Should this Line : LDW_Type must be set to "Haptic LDW" when Embedded Vr is set to "authorized" ?

[@yakirkli]

Hi.. changes not save.. i try to change tyre pressure from bar to psi (click save).. and he is back to bar :(

[@carloscarlos6238]

No es posible añadir más colores ambiente?

[@techcraft_de]

Thanks for this video! Is it possible to activate ACC If you have the Distance Warning, Camera and Radar?

[@MicheleP]

Hi! Well, if you have all of these 3 feature you should have the ACC already active! If you have the front radar (and you see the distance from car in front of you) you have it!

[@angelotambini]

Through this, are you able to enable android auto? And bypass the version requirement ?

[@dinodics4442]

Yes i enabled android auto but i don't know what you mean by bypassing

[@MicheleP]

What do you mean by bypassing requirement?

[@dinodics4442]

I've just got a idea why is not working on him i will make a video and post a link here how to do it step by step

[@angelotambini]

@@MicheleP my current r-link version is 2.xxx so i mean, can you enable it without the 3.xx version

[@MicheleP]

NO, you can't.

[@steveturnbull9542]

Can I activate RS monitor using this method?

[@MicheleP]

Nope. Rs monitor is only in RS version. It has a dedicated ecu in the dashboard

[@steveturnbull9542]

@@MichelePI have a 2019 RS Megane so does it have the ECU?

[@steveturnbull9542]

I can add it from RLink store but it is £325

[@rodrigoperezrios1454]

Hi, Michele. With the developer mode, can i change the unit L/100 to Km/L ?

[@MicheleP]

Yes! I will do a tutorial in these days on how top

[@rldchua]

@@MicheleP hi. Thanks for the video. Is there one on this without using ddt4all?

[@yannickbarbaroux4770]

Hello, Plz, how to disable 3d sound arkamys with developper mode ? I have Megane 4 limited and i can't. It's just possible to disable 30 secondes but i can't delete this option 3d sound arkamys. Plz help me. Tank you

[@ismaelflorentinp]

bonna sera, soy español y no tengo muchas nociones de italiano, seria posible activar el regulador de velocidad adaptativo o el mantenimiento de carril en modo desarrollador? y como tendria qque hacerlo, gracias por tu aporte

[@jerzykman]

Hello Michele, Is it possible to turn on engine sound in sport mode? Few days ago i heard great engine sound from speakers but it happened just one time. In the settings sport sound is turn on all the time. I know that it is common issue. Have you got any solution?

[@MicheleP]

actually you should activate ESE (Engine sound Enhancement), in audio cluster, but only via DDt4ALL

[@thegodneggas]

Hello! Have you got any idea how to activate the multi-sense in R-Link 2 in an a Scenic? Thank you!

[@MicheleP]

scenic latest version? does it really come without multisense?

[@thegodneggas]

@@MicheleP yes, I got an scenic 4 2019 limited edition and come without multisense activated, I mean, everything is there just I need to copy from another one with the Multisense to activate mine...

[@yusfqimch1793]

Thnks alot fir ur video.& i have a question.can i active the video when the car at a road??

[@MicheleP]

Yes, under HMI you will find everything!

[@Ricardojfmartins]

@@MicheleP I've changed the HMI -video to permitted, saved and still the video stops when car starts moving...please help

[@MicheleP]

You did reset sw?

[@Ricardojfmartins]

@@MicheleP I guess not! Reset it and tried again and it is working like a charm! Thanks mate

[@komarismail2990]

How to reset sw? Is it long press the power botton of the R Link 2? Thank you in advance

[@sheko2000]

how to activate the rear DRL in kadjar to be on all the time same as megane 4

[@UkuraciUsername]

Hi Michael, love you videos. I have a question...Can I activate android auto via developer mode and how? I have r-link version 7.0. Thank you in advance.

[@user-hd7ej9om1u]

I dont think you can, you’d need to do some hardware mods but it’s easier to just go to a dealership and make them do it

[@UkuraciUsername]

@@user-hd7ej9om1u thank you.

[@MicheleP]

They will never do it, because it’s an option you have to pay when you buy the car. You can activate it via DDT4ALL and OBD 2 interface, is very easy actually

[@ANTKOLINKO]

Can you please specify exactly where the setting for Android Auto is located? I just got an update from a dealer to version 7. They say it's not possible to use Android Auto in my Megane (it's from April 2017). But I just want to check it in debug mode. Maybe it's there. Thank you very much for such a great video! And you English is quite good!