Racking & SSH Configuration of Cisco Switch in Data Center

🚀 Rack and Secure: Cisco Switch SSH Configuration Tutorial
Welcome to our networking tutorial series! In this episode, we guide you through the essential steps of racking a Cisco Switch in the network rack within a data center. Learn the correct procedures for physical installation and placement to optimize network performance.
Topics covered:
Racking the Cisco Switch in the data center network rack
Connecting the console cable for initial configuration
Configuring SSH for secure remote access
🌐 Subscribe for more Networking Tutorials:
Stay tuned for future tutorials covering a wide range of networking topics. If you found this video helpful, don't forget to like, share, and subscribe! Let's build robust and secure networks together. 🌐✨ #Networking #CiscoSwitch #SSHConfiguration #DataCenter #TechTutorial 🚀
----------------------------------------------------------------------------------------
🔗 Connect with us:
Twitter: / realarnoldmwz
Facebook: / arnoldtechno
LinkedIn: / arnold-mwanza-5233a186
Instagram: / arnold_mwz
Don't forget to like, subscribe, and hit the notification bell for more exciting tech insights. Thanks for joining us on this journey! 🖥️💡

[@giovannigommba5938]

nice and simple. HELLO FROM BROOKLYN. NY.

[@CloudywithArnold]

Thanks and welcome

[@Sn0opY1988]

YT is slowly starting to reccomend more and more of ur awesome videos - keep up the good work!

[@CloudywithArnold]

Thank you 🙏🏾

[@mellord83]

Nice video! I'm just getting started on my studies to renew my CCNA.

[@CloudywithArnold]

Thank you! Best of luck!

[@robertjr2961]

good video. i think you should include your commands in the comment section for people who prefer reading the commands step-by-step but this is your channel

[@CloudywithArnold]

Thanks for the feedback, I will make sure add them on my GitHub page

[@saintnzola6230]

hey man, Hats off with your videos, Congo is definitely proud of you

[@CloudywithArnold]

Thank you 🙏🏾 brother

[@avinash0072355]

Excellent video bro! Keep up the good work!

[@CloudywithArnold]

Thanks!

[@bannoyan4924]

Tanks bro keep going one day you will get 1 million subscribers ❤❤❤

[@CloudywithArnold]

Thank you 🙏🏾

[@nsxtogo6044]

Nice Video, but it would be great to show us how to configure the IP Address on the switch in order to SSH to it. But again thank you very much for sharing the Knowledge.

[@CloudywithArnold]

This video demonstrates how to configure SSH, assuming you've already set up the IP address on your device. For assigning VLAN IP addresses, watch this tutorial: kzbin.info/www/bejne/lZi4mnudbstmhcksi=H-qNR7FnDeRd_ZBt Don't forget to subscribe! 🙏🏾

[@alittax]

1:06 I haven't tried, but some people gave the advice to first insert screws right below the ones that will hold the device. That way, the first two screws (which you'll eventually remove after the device is secured in place) will hold the device, and you'll have an easier job mounting it.

[@CloudywithArnold]

Exactly, but the Catalyst 9200 is not as heavy as the 3850. I was able to hold it.

[@alittax]

@@CloudywithArnold Good point.

[@sayedazizullahsadaat]

Good job man you got my support 🙌👏

[@CloudywithArnold]

Thank you so much

[@linux-u3g]

Just subscribed your channel so I can watch more videos from you

[@CloudywithArnold]

Thank you 🙏🏾

[@anwar6971]

Good explanation

[@CloudywithArnold]

Thanks and welcome

[@7onysWorld]

Nice one

[@CloudywithArnold]

Thank you

[@aj-loves-tech]

Nice video man ,i am your subscriber 🎉

[@CloudywithArnold]

Thank you 🙏🏾

[@44o6zs6sll4]

good job

[@CloudywithArnold]

Thank you!

[@bebetonseyani2801]

Nice!

[@CloudywithArnold]

Thank you so much

[@Nobless]

That`s nice and well explained. You have my support Bro. Do you provide any training to people?

[@CloudywithArnold]

Thank you so much, Not yet for training I will share a video once my training lab will be ready

[@Nobless]

Thank you Bro. I am interested.

[@vars-itlearnings7467]

Thanks Appreciate your efforts one clarification how to add the network switches and devices to centralized Active Directory domain to use centralized AD account any way to use

[@CloudywithArnold]

Noted ! Thank you 🙏🏾

[@hivemind3683]

Hello I was able to follow most of it but got lost on few steps. 1. the domain name, is it something you just make it up or is it an actual domain name? 2. the ip address 10.x.x, where did you get that?

[@CloudywithArnold]

This a video serves as a guide on how to SSH and console into a Cisco Catalyst 9200. Before initiating SSH, ensure you have an assigned IP, typically derived from your subnet. For generating an SSH public key, you'll need a domain name, where the key will employ the device host as a subdomain. For instance, 'switch.example.com' becomes your public key. Stay tuned for a seamless walkthrough

[@mellord83]

Correct me if I'm wrong, but the IP you use in putty is the IP address that you configure on the Vlan1 interface of the switch. Make sure you configure the network interface card (nic) of the laptop with an IP address in the same subnet as the IP you configured on the switch and test the connection by pinging the IP address of the switch.

[@CloudywithArnold]

I will be publishing another video explaining subnetting and VLANs. The IP addresses used in the demonstration are sourced from my main switch, which is configured with a /24 subnet. Additionally, my laptop is in the same VLAN. Stay tuned for the video!