RadioLink RC4GS Ground Transmitter - In Depth Overview

Follow me on Facebook for daily updates: / techtronic9000
⮟⮟⮟OPEN DESCRIPTION FOR MORE INFO⮟⮟⮟
The RadioLink RC4GS is a highly advanced ground transmitter intended to be used on R/C cars and R/C boats. It features a high number of advanced customizable features such as: EPA, STEXP, STSPD, THEXP, THSPD, A.B.S, ACCEL, IDLUP, SUBTR, REV, D/R, ATL, PMIX, F/S. The working range is also higher than on similar models and goes up to 400 meters. Last but not least the RadioLink "G" type receivers come with built in and adjustable gyro system.
Main Features:
● 2.4GHz FHSS system
● LCD screen with backlight
● 10-model memory
● Programmable mixing
● Servo reversing, sub-trims and EPA ( all three channels )
● Low-battery warning: battery light flashes when voltage drops to unsafe levels
● Steering dual rates: allows you to adjust steering rates while you are driving
● Steering operation curve adjustment and throttle curve adjustment shows in diagram simultaneously
Available from:
bit.ly/3naxs8q
bit.ly/3tNpDth

[@TechTronic9000]

The RC4SGS and accessories such as compatible receivers are available from: bit.ly/3naxs8q bit.ly/3tNpDth

[@eskimojoe6564]

I love this radio.I hooked it up to my old tamiya hornet with savox servo and Hobbywing 60 amp esc and it’s pretty much dialed.

[@kevinbreeden7088]

Got one of these Radiolink RC4GS Transmitter and Receiver on the way from China. Been watching you tube reviews on it it has all the features I need for my 1/5 scale Rampage XB 30cc gas buggy. CANT WAIT TO RECIEVE IT !!!!!

[@kevinbreeden7088]

And the gyro is an awesome feature on this transmitter, a must have for large scale gas applications.

[@TechTronic9000]

Yes the gyro is a "must have" as the scale increases, it gives out a lot more precision and stability. It's a great upgrade for RC cars.

[@joeyfesta2042]

I love my new RadioLinkRC4GS. This is going to take months to program this controller. So far,so good.Definitely worth the low price tag.

[@TechTronic9000]

Yes it's a very good transmitter

[@chrisricotta7063]

Just got one today and happy with it .

[@TechTronic9000]

Cool!

[@taemac10]

How did you get it to properly calibrate with your esc? Thanks

[@themountain59]

Very nice explanation!

[@gonzodetroitify]

What a show💎💎

[@drewflynn7562]

THX SO MUCH

[@rc3151]

This was really helpful tha is alot for sharing.

[@almighty151986]

It's biggest advantage over the FlySky is the use of FHSS modulation.

[@jaysmith2661]

very useful video

[@TechTronic9000]

Thanks

[@rckhandu2840]

Ok I'm gonna buy this thing thanks!!!!

[@TechTronic9000]

I'm glad you liked my video.

[@jeffparryncc1701]

How do you slow down the reverse to stop jumping and make reversing smooth? Thanks.

[@BillyBanana75]

My abs does nothing, if i hit the brakes it just locks up the wheels . Any suggestions? Thanks

[@noname-ge3tz]

old vid but still very good thank you

[@TechTronic9000]

Glad you enjoyed it

[@zeno6111753]

How fast is this radio compared to a Futaba 3PV? I can't find any info on either radio.

[@TechTronic9000]

Haven't had Futaba to be able to compare, but versus the cheap FlySky it's a lot more better, especially when the range increases.

[@butahuruf]

Thank you for your review! very helpfull! Is the receiver waterproof?

[@TechTronic9000]

The receiver is not waterproof, but it is easy to make it, there are some special insulating substances and it just needs a dip into it and it will be fine.

[@aliffaslam7289]

Sir i want to ask, if i have my own gyro, then i plug into the radiolink receiver, can i adjust my sensitivity gyro using the toggle button on that remote? or is it only can be use with built in gyro only?

[@TechTronic9000]

Only for the built in gyro.

[@sonywoofer]

Hi...Im using this remote for my crawler, I can't find the setting for my rig to lock the movement when 0 trottle. Can u help?

[@Abszurdista-fatalista]

11 months later... that is an ESC setting.

[@hottrodd1090]

Thank you for this video. I just bought the version 2 and I have a couple questions. How can I make either aux channel 3 or 4 an on off switch? I'd like to either make fans come on or an led light turn on or off. Next question is can I bind the receiver to more then one transmitter? The reason I ask is I'd like to put all 6 of my rc trucks into my transmitter and when my grandson comes over I'd like to be able to hand him the spare transmitter and be able to drive one of my other trucks without having to bind to the spare transmitter

[@TechTronic9000]

One of the extra channels can be used separately, the other is for enabling the gyro. I haven't tried to bind it to several receivers and see if it works with all of them.

[@hottrodd1090]

@@TechTronic9000 do you know how I can use the switch on the handle as a on off button? I'd like to be able to turn my fans on or off using it.

[@bf1isabeast178]

Shall I use a 2s or 3s lipo in the rc4gs, what difference would the 3s have over 2s, many thanks

[@TechTronic9000]

On the data sheet it says Power Supply :4.8-15.0V DC,4*AA or 2S-4S Lithium battery. There is no difference in its working, just calculate the capacity in mWh or Wh and see what capacity you can actually fit for a longer runtime.

[@laygoman7547]

how many servo motors or stepper motors can i have on the receiver? also would i have to program it?

[@TechTronic9000]

It has 4 channels / 4 receiver ports, one can be mapped to gyro.

[@felonies]

Does this radio have a 50/75/100% throttle like the spectrum does that comes with the new arrmas? I only ran my kraton 6s on 50% with my spectrum system. Switched to this one and I don’t notice any difference in speed. Was wondering if there’s a setting to change the throttle limit?

[@TechTronic9000]

Yes, you can customize gains in steps of 1%

[@felonies]

TechTronic9000 where do you do that? Do you have any idea

[@LRCR]

The Third Channel can it be used for rear steering Servo in a Rock Crawler's application?

[@TechTronic9000]

Yes, you have the VR switch which you can use as you like (proportional).

[@LRCR]

@@TechTronic9000 Thank You for your response and I look forward to using this set of controls for my Crawler without gyro and SCT with the gyro control ✌️😎👍

[@TechTronic9000]

Yes, if you disable the gyro you have a extra chanel.

[@LRCR]

@@TechTronic9000 Thank You, I have subscribed to your channel and I would appreciate it if you would Sub Mine also.. Having Fun Laughing Playing and RCing ✌️😎👍

[@TechTronic9000]

@@LRCR You have a new sub ;) Also maybe you can join some of my RC facebook groups as I have plenty and you can share you videos there also, send me a message on web.facebook.com/TechTronic9000/

[@kalimerot5383]

I bought this transmitter with receiver and I want to use it in my boat ... But when I plug the battery the motor after beeping start and dont stop . It stop only when I push into reverse .Any idea for set-up ?

[@TechTronic9000]

Maybe the ESC needs calibration?!

[@kalimerot5383]

@@TechTronic9000 Ok Ill try this thanks

[@AbideinChristFully]

Is this noticeably slower for racing compared to a Sanwa MTS?

[@TechTronic9000]

I don't have a Sanwa MTS but it's definitely less laggy than a cheap FlySky

[@davidskopek9999]

Hi, I got RC4GS remote and it can connect to R6FG receiver, but I also got R4FGM receiver and I cant connect it to remote... Where is the problem?

[@TechTronic9000]

Theoretical that should also run, maybe the pair sequence is different.

[@supermanwhereareyounow3081]

I am not using gyro and I cant seem to make the 3rd channel to work like my futaba...I want the throttle to be master and the 3rd to be slave..but the third channel doesnt do anything..3rd channel servo only moves when I turn the button...help.and no 5:5 or 7:3 throttle choice?

[@TechTronic9000]

Probably from channel mixes you need to set up somehow.

[@supermanwhereareyounow3081]

@@TechTronic9000 so nobody knows...the manual lost me in translation when reading about 3aux and pmix but it keeps on going on about SW..as if it is so proud of that feature...

[@supermanwhereareyounow3081]

also it doesnt have 5:5 and 7:3 throttle initial position..

[@stock2exstreme851]

hello I have the r6fg receiver, where should I connect the batteries? can i connect it in one of the 6 channels?

[@TechTronic9000]

Yes it will connect to any of the channels.

[@gera8412]

Hello..how many chanel can be mixed in radio link??is it chanel 1&3 and 2&4 can be mixed at the sametime??tx cheers

[@taemac10]

Hoe do you calibrate this and bind it with a vxl-3s esc? Thanks

[@TechTronic9000]

That should be related to the ESC, i'm not familiar with that model.

[@taemac10]

@@TechTronic9000 Oh ok,I got it to bind but just won't properly calibrate. Thanks anyways ..

[@leovincent6017]

Does it come pre binded?

[@TechTronic9000]

Mine was.

[@baconcoaster03]

Can this receiver run on a 3s lipo

[@TechTronic9000]

It can take up to 15V so 3S lipo will work OK

[@baconcoaster03]

@@TechTronic9000 thanks

[@MasterBoubleBee]

How far this transmitter can go until lose signal?

[@TechTronic9000]

Depends on the environment, i've got mine up to 500m and was still going, was using an FPV camera setup on the car :)

[@MasterBoubleBee]

@@TechTronic9000 nice, iam gonna buy this one

[@dezandriadezandria6808]

please create video radiolink with 2 receiver rc car!

[@TechTronic9000]

I don't understand exactly, do you want 2 receivers in one car?

[@rcrazee5077]

TechTronic9000, so which one is better, FLYSKY of this Radiolink in your own experience..I needed something that will prove me to purchase it, since I am looking for alternative radio than flysky GT3B and GT3C which is lacking some special functions like those found at this radio..Flysky sometime lags and before it reacts. too late, already in a ditch.

[@TechTronic9000]

It's a known issue that FLYSKY will lag, especially with range increase.

[@rcrazee5077]

very true that is why I am asking your honesty about the Radiolink. I have 2 flysky and they all sucks on range..GT3B GT2E some functions even not working on GT3B unless you hack the firmware which I will not do.

[@TechTronic9000]

Well I didn't had any lags with the Radiolink until now.

[@rcrazee5077]

thank you very much for the prompt reply..now I just ordered one..waiting for 1 and 1/2 weeks to come by my doorstep. Again thank you for your great review. Subbing!!!

[@TechTronic9000]

Thanks for the sub, highly appreciate it

[@paperroutReese426]

Can I use it with nitro rc

[@TechTronic9000]

Yes

[@Openthrottlerc]

So how do you adjust throttle trim?

[@TechTronic9000]

Don't need to do that, just calibrate the ESC.

[@birdbangbobaruni]

Did you buy this at Radio shack joke only

[@TechTronic9000]

No radioshack, you can get it form bit.ly/3naxs8q and bit.ly/3GcVvLg

[@samechdelatorre2122]

What ESC that you connect. Pls send me link

[@TechTronic9000]

It's a UBEC voltage regulator, got it a long time ago from hobbyking, it was under 10$

[@samechdelatorre2122]

Thanks...... i try to look if still have in the market.... hope you try it with motor so the viewers will see how the acceleration work..

[@samechdelatorre2122]

Is it same like esc?

[@TechTronic9000]

No it's not an ESC, it will not spin a motor, that is a UBEC, it converts battery voltage to stable 5V to power the receiver.

[@larrybaker6638]

I got the very same tranmitter and all my does is say "exit low voltage " that is all it does. This is a piece of crap. Worst money I ever spent. Dont buy it.

[@TechTronic9000]

Are your batteries OK? settings? Replace it! Mine is still working since this review with ZERO issues!