Wire Wrapping Tutorial: LIGHTNING FAST COILS!

In this video I walk you through the process i use for making coils on a power drill.
To help support this channel or to see more of my work check out:
www.patreon.com/raftark
www.raftarkjewelry.com/
raftark

[@DonsDesigns1]

I have seen you make these several times by hand but adding the power drill makes quick work of it. Thanks for sharing this time-saving tip.

[@annamanker6771]

The captions labeled the drill noise as music, them applause 🤣😭 I'm crying! Also thanks for this killer tip. Coils are killing my poor hands

[@choochthepooch4427]

Crazy how much time this saves compared to hand coiling, can't believe I ever did this all by hand.

[@WalkNancy]

That IS lightning fast and will save us all so much time! TY! I hope you've fully recovered since Monday. See you on the 21st.

[@ashleyholmes4379]

Wow! Thank you! I spent 3 hours yesterday making coils by hand. Can't wait to try this instead! Thank you so much!

[@shirleycoleman703]

This is amazing! Reminds me of peeling an apple with a drill to wow my grandchildren. I am the one wowed this morning. Thanks for your tutorials.

[@victoriaharrison-sewell6717]

Thank you once again for a beautiful coil design. They really enhance the whole piece. I'm practicing these coils without the drill, as you say, it becomes a bit tedious..& less engaging with your piece.

[@rorybrown1799]

I will try this, very nice and helpful, thanks for sharing this

[@cinzar1]

You make everything seems so simple. It's any but simple. You are an artist!!!!! Love watching your videos.

[@genevatungate1006]

Great tutorial! I love the way you talk and how well you explain each step. Thank you!

[@hazelparr8461]

I've never watched a wire wrapping video before but it does interest me. I found your video both informative and soothing. Thanks for the introduction xxx

[@kimbain4368]

What a cool technique. Time-saving and fun to watch! Those pendants are incredible (that Labradorite!). Thanks for sharing!

[@FadingAway10]

Such an amazing teacher !! Thank you so much for your videos 🙏

[@carolcamp4828]

Wow. Super impressed!😎 Your work is beautiful.

[@consueloyoung4484]

Thank you so much for this tutorial. I have made this wrap before, but it was never as easy as this. I find that the smaller gauge and the square wire make a big difference in the entire process. Thank you 🙏🏼

[@gingerpeach6]

Just what I have been looking for. Very good.

[@annhopy2220]

Thank you for this video. Wondering if you would do a piece using your honeycomb pattern for your youtube watchers. Thank you very much for your uploads.

[@mlpsecrets7931]

So happy that I found your channel :3

[@jaredt5127]

Love this.

[@unicornlegend283]

I don’t do jewelry stuffs but this man’s voice is calming and Me like it. 😍🙌🏼

[@deborahbrady5838]

Sounds like a comforting person

[@RadioWendy22]

I normally find voices like his boring but I actually dig it for what he teaches. He is precise with his verbiage and speaks clearly. He doesn't speak too fast to follow. Just enough time to absorb what he's saying and comprehend it. Most wire wrapping tutorials whip through it too fast to follow & it's a constant stop, rewind, find your spot again cycle. So frustrating!! But this guy has the PERFECT tempo and clarity to follow and absorb!!

[@MJkatzTheWriter]

You make it look easy. 😄 💖

[@pvuse6140]

wow thanks for this been wrapping for years by hand, tried a drill early on but it didnt work, should have tried harder!

[@glacierblue]

Thank you! Grateful.

[@gailgwood]

Wow! Thank you!

[@allymcmorris1]

Hubby's drill is pretty bulky...I ended up modifying my x-acto knife...I unscrewed the top, took knife out and pryed the teeth apart, put L-shape wire in the slot, and tighted it back down...works perfectly and not as heavy!!! Plus, I don't have to use 'his' tools...hahahaha

[@zandenlee2313]

Have you tried square in your drill? It’s a lot of fun because it twists beautifully!

[@aylaedwards2968]

Why have I not thought of this

[@_Madeleine_]

This is such a great tip! May i please ask what drill you have?

[@Vibrationofawesome]

Wow! I picked up some small nuggets. I’ve been using my flex shaft to make coils for years now but never thought to bend a 90 to stick out the teeth of the chuck. This should make a difference, I often break the wire off in mid coiling. It can be super frustrating

[@bearlivesalone1660]

same concept with vape coils, I was pretty good at making those with my drill so this should be no problem!

[@leilakirkdietzolsen6741]

Thanks ❤️🇩🇰

[@michelestevenson8769]

Can I please ask what the tattoo is on your left hand? Your hand never stays still long enough for me to see it and figure it out and curiosity is about to drive me bonkers! 💥 Sorry if this is too personal, not trying to be rude at all. By the way, I love your work and thank you so much for all the work you do to teach us all that you do. Hope you have a great day!

[@loisdemers6059]

I want to try this, but I only have round. I'll try anyhow!

[@MrBali123456]

Thank you very much for your video. Since I don't have the tool like yours, I've tried it with mini grinder (dremel but not Dremel brand), but I can't do it as the grinder rotate too fast even with first level (I think it's about 5,000 rpm). How long can the tool make the coil of 28ga wire on 26ga wire? For example, can it make as long as 30 cm ? Thank you again for your inspiring tutorial, Sir. Btw, nice tattoo :).

[@Kimchislife]

awesome 🤣🤣🤣🤣🤣

[@GlitzyWitch]

Thars cool, I actually have a bit of equipment that coils for you, but this looks faster, and way cooler lol

[@elizabetht5479]

Does it get hot when using the drill?

[@netcreativedesigns]

My rotary tool does not have the reverse option but I do use a dremel flex shaft with it. Could I coil like you do in the opposite direction?

[@kendrarhea957]

How long did it take to get good at it?

[@imaginariumjewelry7495]

Have you ever pulled this off with copper wire? I haven’t done as many heady pieces with Silver, I’m still in the copper experimentation phase, and the copper always seems to snap in the chuck.

[@noxcorvum1999]

I do this with copper. Sounds like you're using too much tension on your smaller wire. Try to remember to let the drill do the work, don't pull, just hold.

[@shacarapearce1180]

Is ur live est time or pacific

[@1953lewbad]

I could not get the link for your full length tutorials. Can you post it here in my comment so I can click on it?

[@allisonwonder78]

help! what am I doing wrong? after a few cm of coiling the base wire brakes!

[@gustavojavier5462]

Hello ! how are you? Excuse me for talking to you over here ... It's that I tried to talk to you on patreon and I don't know how it's done ... My question is this... I want to subscribe to your patreon ... From the moment I subscribe I will be able to see complete tutorials on how to make jewelry with wire? Because I'm confused ... He says that after 3 months I will be able to see the complete tutorials ... Could you guide me? Thank you in advance for answering me :)

[@debbiegoble9836]

I Could never make what you make

[@gaiawiththelocksearth5184]

Omg you peeping cheating genius god bless your brain

[@lalasstarrsstarr6337]

Why did u show people this aggh

[@RaftarkJewelry]

😂😂😂