Howdy, You can view/purchase the ZOHD Drift here : bit.ly/3cVDylf .There is some background noise in this video due to a busy road being a few metres away, however being able to use this site to get the maiden of the Drift out to you on video ASAP was more important. I'm sure you appreciate that. Matt 👍
@MrDario83 жыл бұрын
You are the best with your suggestions and conclusions, so thanks for your work Matt
@onnovannoort76904 жыл бұрын
What a lovely little plane, got lots of potential, nice addition to the NT, zohd is still going strong! Nice vid Matt!
@RagTheNutsOff4 жыл бұрын
Thank you Onno
@djwak592 жыл бұрын
I bought one of these and I’m also a newbie to planes. Thanks SOOO much for the heads up re the level of difficulty flying it ! I’ll make sure I go for a SkySurfer or Bixler first. Thanks for the other tips also.
@quadthingcopter59842 жыл бұрын
I'm flying my drift with no flight controller, fly's nice and straight when gliding but when you give it throttle it pulls to the left, does the motor need shimming to one side?
@n1vca4 жыл бұрын
I am glad you chose the least noisy environment for your recording
@RagTheNutsOff4 жыл бұрын
I know, dam other people & the weather!
@pokerchannel69912 жыл бұрын
Hi: am I correct to think that Kopilot is for short range with feature of RTH when signal is lost . . . but iNAV has GPS that can be programmed to go go go far on an autonomous mission? Is that the difference? So, if I want to program a long range autonomous mission, I need either iNav. No? thx.
@terrymurphy5624 жыл бұрын
Nice matt, also nice to see you back doing what you are so good at. 👍
@lucbisschops4 жыл бұрын
Good video Math, did not realize the ZOHD is so small, perfect for hiking👍
@RagTheNutsOff4 жыл бұрын
Hey Sky, oh goodness me yea. A little fragile, but would be fine in a loose bag. Matt
@RcAircraft4 жыл бұрын
Hi Matt, i see the exercise has paid off. Very quick you ran over to retrieve your model from the middle of the field. ;-)
@RagTheNutsOff4 жыл бұрын
Hahahah turbo speed too :)
@typxxilps4 жыл бұрын
a pretty loud sport or field close to the highway ... even though everything is so green. Nice plane. Finally my Radiomaster arrived today ... so I can finally start my adventures. As being said previously that is not my plane cause it is far too delicate for my experience or missing experience. But I like the style of the plance even though the wings feel to small and too thin. But that is just my opinion cause my nano talon evo had needed a lot of evolution to get where it is ... so I might be waiting for the Drift XL Plus ... lot of - stunning - work so Thanks
@AdrianoCasemiro4 жыл бұрын
Some flying skills were shown. What's the laminate of choice to reinforce foam?
@RagTheNutsOff4 жыл бұрын
Hey Adriano, thank you. For the lam, see the series I did on laminating RC models a few years back, Still using the same stuff. Matt
@FraggsUK4 жыл бұрын
Happy days indeed Matt, bet it was a late one last night getting the Drift and Drak ready .
@RagTheNutsOff4 жыл бұрын
Hola, yea very late for me (11pm) and up at 02:30. Worth it though, the Drift was amazing. Matt
@JD_14 жыл бұрын
Great Video! Please do a video on the inav tune you put in it. I got one coming in the mail. 🙂
@dougmcpheters15464 жыл бұрын
JD!
@sladelefty4 жыл бұрын
I must say again how lucky you are that your wife is with you on this hobby. My wife beats me with the broom whenever she finds that I’ve been flying. I guess she is terribly jealous.
@jannesbosma98014 жыл бұрын
It would be great if ZOHD would make a nice sub250g craft like this one that would include the weight of DJI FPV like the CADDX Vista. So 20g or so less.
@johndemmer34964 жыл бұрын
I think to make it lighter one would need alien tech.
@sams97164 жыл бұрын
How do you think it would do for long range?
@johndemmer34964 жыл бұрын
This might be the Goldilocks zone. Larger than a UMX Radian but smaller than a Phoenix glider. Both great planes.
@spooffpv98954 жыл бұрын
You could squeeze a Dart alongside the Drift into that size rucksack 😆 This does look like a fab airframe despite what appears to be classic Zohd marshmallow foam.
@RagTheNutsOff4 жыл бұрын
Morning, that foam doesn't seem as bad. The fuse is pretty tough stuff. Matt
@rcpilots12914 жыл бұрын
Thanks Matt for another honest review , looks great 👍
@RagTheNutsOff4 жыл бұрын
Thanks 👍
@karlc9773 Жыл бұрын
Is the cv set for the fpv and kopilot ?
@George64G4 жыл бұрын
Bixler 2 or Volantex Ranger 2000 for which on would be better for a Newbee!
@benemdav4 жыл бұрын
I started with the bixler 2 but I have not flown the ranger before.
@George64G4 жыл бұрын
@@benemdav I would but everytime I get ready to drop the cash to grab everything....OUT OF Stock!
@George64G4 жыл бұрын
OH Snap it in Stock....Purchased!!!!!
@George64G4 жыл бұрын
I'll wait for them to ship it from Hong Kong
@RagTheNutsOff4 жыл бұрын
The ranger, I'm not sure it would take the same amount of abuse as the Box or AXN to be honest. However it's higher winged and the motor is at the back, so might take a good few smacks in the ground before breaking. Matt
@The_Pub_4 жыл бұрын
Hi Matt Can you advise as to what the best laminate (clear), easy to use is as half the stuff that I have used is junk, will not adhere properly or will Not last once it has been wet!! Cheers
@jerrynormandin28924 жыл бұрын
Mat, When you built the Drift did you notice the tail is out of alignment ? I just built mine, the tail assembly collar lock locks the tail section 3 degrees out of alignment. I wonder if I can heat the glue on the collar and twist it or do I have to break it, 3d print a new one and glue it on place ?
@RagTheNutsOff4 жыл бұрын
Hey Jerry, mine was straight. However ai have seen others whose are out of alignment. Not sure on the best fix to be honest Jerry. Matt
@1Esteband4 жыл бұрын
How do you compare this with the mini skywalker? From the outside it seems more tame and maybe a little boring bt would love to hear your opinion. Thank you.
@dougmcpheters15464 жыл бұрын
The overtime is appreciated!
@RagTheNutsOff4 жыл бұрын
Thanks Doug, that was a crazy day yesterday. Two videos to be edited, a full size Drak to finish and I added inav to this one too. Matt
@dougmcpheters15464 жыл бұрын
@@RagTheNutsOff yea bro! Your efforts show! Really glad to see you back in action furthermore. Certainly was bummed when you took your FPV sabbatical 💔. Glad it wasn't permanent. And hey, there's always Stand Up Comedy... You'd kill it man! Funny as hell when you want to be 👍. Oh, it was you that taught me how to laminate worth a damn! Mucho Preeesh!
@csteelhead19883 жыл бұрын
What thickness was the laminate covering?
@davdaya4 жыл бұрын
Can't wait to see Inav + FC inside its guts.. and hit further range.. 👌😁
@RagTheNutsOff4 жыл бұрын
Done and that's today :)
@frasersteen4 жыл бұрын
I'm curious to know if it is as stable in the fpv feed as the nano talon
@RagTheNutsOff4 жыл бұрын
Fraser, more stable. Obviously as shown in the follow up video it will get thrown around by a cross wind, besides that pretty smooth and no rocking like the V1 NT had. Matt
@frasersteen4 жыл бұрын
@@RagTheNutsOff Thanks, looking for a little fpv plane I can easily pack in a suitcase to take on holiday. The wind is often strong at the seaside though so some decent stability is a must.
@bensonfilmworks75954 жыл бұрын
With such a small battery does using the video transmitter shorten the flight time significantly?
@RagTheNutsOff4 жыл бұрын
Howdy Benson, the VTx doesn't take that much power to be fair. Also after this video I changed to iNav and 18650 batteries which give me 3500mAh 2S, so that's about a day in the sky 😁
@gdcarter014 жыл бұрын
Do you think the CG is off because they designed it to have the fpv Tx and camera in front?
@RagTheNutsOff4 жыл бұрын
Hey Grant, nope. The CG balance point is to the model as a whole. It just needs to come forwards a bit to behave. Matt
@mikegriffiths74874 жыл бұрын
Is there a danger of bubbling the EPP when applying laminate film?
@RagTheNutsOff4 жыл бұрын
Hey Mike, yes if you apply too much heat. Just go steady, there is no rush when laminating ;) Matt
@TweakRacer4 жыл бұрын
Factory photos show no downswept tips (they're straight). Maybe yours is warped out of the box or during laminating.
@RagTheNutsOff4 жыл бұрын
Howdy, nope they're supposed to be like that. See the others out there, they're the same. Matt
@TweakRacer4 жыл бұрын
@@RagTheNutsOff Thanks, Matt! You da man :)
@julianhumphrey48434 жыл бұрын
looks good, great potential, interested in this for inav if it will take my big ole flysky ai6B rx
@anthonywitham23054 жыл бұрын
Matt, what's the all up weight with the battery?
@RagTheNutsOff4 жыл бұрын
Hey Anthony, ah I have no diea, mine now has iNav in it!
@anthonywitham23054 жыл бұрын
@@RagTheNutsOff: Banggood reckon if you have the FPV version and a 900mAh 2s or 800mAh 3s it'll be sub 250gram. No worries, I've got one coming, so I'll check the weight with different battery's. Good to see your back! 👍😀.
@richardlong36154 жыл бұрын
I hope ZOHD sell a lot of Drifts they'll need to with the number they've sent out for free - the world and his dog have done reveiws.
@RagTheNutsOff4 жыл бұрын
Hi Richard. Indeed. Good job I bought mine, just like every single other model shown here. Matt
@kreisflieger4 жыл бұрын
Why is this model being pushed on so many channels? It's more of a toy. Are there any special commissions for this?
@RagTheNutsOff4 жыл бұрын
Howdy DB, the model fits a specific area of light, small and glider that's not covered well at all, hence that's why you're seeing the enthusiasm for it. For me I want something like this for ultra light FPV, which it's just been converted to be last night. Hope that makes sense. And also of you want to follow the money in RC/KZbin, watch the video J did on affiliate marketing and YoUtjbe in this channel a few years back. Matt
@fontie4 жыл бұрын
Arrgh you bugger my wife's going to kill me with yet another model ordered for my collection. Not my fault dear it was Andrew and Matthew made me lol
@RagTheNutsOff4 жыл бұрын
LOL!
@robertbrander20744 жыл бұрын
I can just imagine a beginner trying to figure out how to fly this thing ....... It's all ZOHD Hype and very finicky flying . I will Pass on it ! ........ Give me 2 Motors $20 , 2 ESCs $20 , 1 FC $20 , 10 Servos and Connectors $20 , an AIO FPV camera $20 , Radio $50 and 20 sheets of Foamboard $30 = Years of Enjoyment for the Same Price $180 . ...... Get back to Building where this Hobby Started !
@RagTheNutsOff4 жыл бұрын
Yea this is definitely not a beginners model at all. As for foam board, I wish I had the time Robert. Matt
@robertbrander20744 жыл бұрын
@@RagTheNutsOff As a newbie , that plane looked impossible to fly ..... I want something Slow , Forgivable and Crashable ...... FT's Old Fogy is my style , so I can learn what the heck I'm doing ! LOL Cheers !
@RagTheNutsOff4 жыл бұрын
Hey Robert, a Bixler or AXN Cloud surfer would be a really good choice. Matt