MJX Hyper Go Rear Differential ReBuild Walkthrough

[@gilbertopelaez1624]

Can you please do it for the front area full video like this one ? Thanks

[@erniiaylien]

Thanks for the video. Would you say that 7k oil was the right choice? Maybe go thicker? Thanks for your feedback!

[@RakishRc]

@@erniiaylien yes actually 10k would have been better.. I had 7k only so used that but even then I get real good control of the car with the 35amp hobbywing esc and this diff oil combo.

[@anthonylim5120]

Didn't know the earlier models came woth Philips screws. Mine are all hex.

[@RakishRc]

@@anthonylim5120 yes the new version are shipped with hex screws.

[@dillanearps9783]

@@RakishRcI did this same exact thing except I replaced one of my steel drive shafts, but after I got everything put back together it sounds like something’s hitting or slipping and my power light just flash but it will drive and everything just something don’t sound right and the light flash now

[@gilbertopelaez1624]

can you make one like that on the front side please and thank you for the video it helps me a lot!

[@RakishRc]

@@gilbertopelaez1624 okay will post a video soon... although it's similar to the rera assembly.

[@gilbertopelaez1624]

@@RakishRc thank you!!! I’ll be waiting ❤️❤️❤️

[@feverexplosion1968]

What size are the wheel bearings? Trying to find upgrades

[@StudyConcentrate-y1z]

Bro where did you get that 7000 cst oil? . Please tell me 🙏

[@RakishRc]

@@StudyConcentrate-y1z I ordered it from rc mart

[@StudyConcentrate-y1z]

@@RakishRc please tell me the price in rupees

[@RakishRc]

@@StudyConcentrate-y1z around Rs.850 www.rcmart.com/team-associated-ft-silicone-diff-fluid-7000cst-for-gear-diffs-5454-00034390?search=7000cst

[@StudyConcentrate-y1z]

​Bro i don't have budget please help me . Bro can I can I use silicon gresse or white lithium gresse . Please reply?? ​@@RakishRc

[@StudyConcentrate-y1z]

​@@RakishRcbro 850 including delivery and GST ?? Please reply

[@Ayushjeemains]

Bro how did you got that silicon oil in 850 i am getting it for 16$ + i need to pay jn dollars so extra charges. Please tell me how did you order in 850

[@t3floz]

Thinking of buying this since my e revo 1/16 breaks alot and inhyste to work on my cars. Ive heard this car is very hard to work and i want to know tour opinion on it since it makes me hesitate to buy it :/

[@RakishRc]

It's tough and durable but working on it is tedious...the screws in particular are a bit irritating to remove on the shock tower for center brace. But it's fun to drive for sure

[@t3floz]

@@RakishRcoh okay thanks! I’ve heard about esc problems. Do you think my e revo 1/16 esc would fit? I think it’s about 1cm longer than the mjx esc and a bit higher but I’m not sure

[@RakishRc]

@@t3floz it could fit..but the stock esc is fine...test it and decide if you need to change else use it. I am using the stock esc for now again

[@MrSjirafje]

Thanks for the guide. What ESC are you using? And does it have less delay than the stock ESC?

[@SAMEERBHASKAR-y1t]

35A BRUSHLESS ESC or (COULD GO FOR 60A ALSO)

[@philiptexter1789]

This is going to be a pain in the ass

[@RakishRc]

Removing the shock tower to separate the top diff cover screws is the most annoying part

[@philiptexter1789]

True that. Im litterally going to get arthritus conquering this one..how long will this diff remain in the bag

[@patrioticyank4940]

Thank you sir very helpful video cause im getting this same truggy they say 500k diff oil on the front and rear really makes a big improvement on this particular model.✌️🇺🇸🔥

[@brandjayfab]

Who says that? That's really thick, probably won't turn after adding that. I'm running 30k and I think it's too thick

[@Ayushjeemains]

What do you think about 15k ​@@brandjayfab

[@Boogie_the_cat]

​@@brandjayfabyeah, 500k is insane in a truck this size. I'd go 15 in front 20 in rear.

[@eliflynn7282]

If I were you I would just buy a different rc. These are particularly fickle and break easily.

[@gilbertopelaez1624]

Question: is the metal upgrade a good thing to get for the hyper go h14bm?

[@Boogie_the_cat]

What metal upgrade are you talking about ? If you mean metal control arms (A-arms) then no, they're a bad idea. Metal arms will cause damage to your diff housing in a crash. You need to be specific, there's more than 1 metal upgrade so I have no idea what you're asking .

[@PatrickFaulkner-pm8ci]

My top brace screws are so tight its like the poured a bottle of loc tite in each end. I have no idea how ill get this thing apart 😢 such a shame because it runs fantastic. Just got it a few hours ago and what a let down when i go-to take it apart.

[@RdkAllDAY98]

Unscrew the skid plate a bit and you can take the bottom part off. My chassis bar is forever apart of it lol the diffs in these are horrible I’ve had to replace the little pins holding the axle shaft 4 plus times. Very sad

[@eliflynn7282]

They super glued it at the factory. Alot of people said the same thing. It's either super glue or red locktight

[@eliflynn7282]

I have nothing but trouble with this rc. It breaks diffs, doesn't steer right, and everytime I fix one thing another thing breaks. It's like it hates me.

[@Boogie_the_cat]

Good, but you left out the step where you need to use a flamethrower to heat up all the LocTite packed into the center brace screws. Seriously, they flood that area with superglue or something and though the screw head is large, it'll strip anyway. This is only half a joke, because if those heads strip, you're gonna have a bad time. Mine had about 3 gallons of some adhesive in it.

[@suntha1262]

Rear differential is easy to breaks

[@RakishRc]

Is it? Will check on that as I run the truck some more

[@t3floz]

How was your experience with the diffs?

[@StudyConcentrate-y1z]

​@@t3flozmine was god

[@eliflynn7282]

So is the front. They use cheap screws for the diffs. Also it's too heavy overall. You need different diffs with metal casings. The telescoping cvds are a huge weight on the diffs too. You can lower the rear and use regular cvds and it helps.