“Rally style BNB front lip” BNB #21

[@mbsocalsti6157]

This is becoming my new favorite channel! I must say Bucky, you have one of the sickest Subaru collections!

[@BuckyLasekOfficial]

Rad and thank you. I have some content of the other cars I’ll throw up here soon.

[@av.nedelcu5910]

BuckYeah that Mini looks dope too. You should do an episode on that

[@BuckyLasekOfficial]

Av. Nedelcu That’s my daughters boyfriend’s car.

[@bungendores_finest]

Also if you want to get rid of the waviness in the centre, double side tape some thin aluminium stems behind to keep the straightness.

[@davidzimmer2694]

Pattern transfer for the win. Great trick for the kids because they are the ones that will carry this sport into the next century. Looks great.

[@mikey_gc8]

This channel needs to blow up

[@rosie684]

Dope! After seeing you hit the lip at the end I would definitely throw a couple more screws in there

[@jimrossabrena7955]

But if you do that, won’t it be more rigid and flex less?

[@bcaslermac]

Love the way it looks, I'd like to do this on my 99 RS. One note, I'd add an extra screw to each corner to help keep the material from dropping that much on heavy bumps. But definitely ordering one when they're available

[@ConnerSpeed6]

I dig it. Such a simple add-on but completely transforms the front of the car. WRC Style boiis!

[@bloodyjawshh]

This front lip is exactly what I have been looking for! I need one!

[@liamflynn4137]

Very smart Bucky!

[@fakealexstrong]

Awesome! Good choice on the textured side.

[@commentator2.0]

Using the tape to know where the holes were gonna be was really smart. Thanks for the tip!

[@kirkblackadar7299]

Some small washers, cupped slightly with rubber underside to go with the screws and I bet it would be even stronger

[@01FozzyS]

I used to have the garden edging on my Forester. Then I found a generic EBay Jetta lip that fit good. That's looks just fine,Buck!

[@craigpriest2720]

Do you remember what model jetta lip you got mate

[@01FozzyS]

@@craigpriest2720 It was similar to this one. I bonded the joint together after fitting it. www.ebay.com/itm/2x-Front-Deep-Bumper-Chin-Spoiler-Lip-Valance-Splitter-Fit-VW-Golf-MK3-3-VR6/132637196020?fits=Model%3AJetta&epid=2281874652&hash=item1ee1cafef4:g:5fYAAOSwo9VbCPzZ

[@mpv314]

Looks fantastic. Maybe a little heat gun exposure will help work those waves out. That worked on my FRP front lip. That and sitting directly in the hot California sun will help too

[@mattpish9675]

Bucky, I have confidence in your abilities. I thought the the trick with the painter's tape was cool. And the new product looks pretty dope!!

[@BuckyLasekOfficial]

Matt Pish Thanks, it took some thought but I’m super stoked on the final fit 👍🏼

[@zacharyt9400]

Show us the blue subaru in the garage sometime! It's always hanging out in the background

[@BuckyLasekOfficial]

Zak Working on an edit now👍🏼

[@fakealexstrong]

BuckYeah sick 👌🏽👍🏽 you built that for your kid if I remember?

[@BuckyLasekOfficial]

Alex MkvTurbo Yup, more like a restoration 👍🏼

[@bradpittiful7288]

looks really good! and great idea with the tape and marking it for the hole placement

[@BuckyLasekOfficial]

Brad Pittiful Thank you 👊🏼😉

[@joshchance4476]

watching bucky is the best way to start the day , buckyeah!

[@STImachine]

This is EXACTLY what I need for my SRT Vermont Sportscar front end conversion!

[@BuckyLasekOfficial]

MoshpitMad 👍🏼😉

[@STImachine]

@Steve Gundrum MoshpitMad on IG.

[@charlesshamseldin9555]

I use .020 sheet from McMaster-Carr to reinforce my front lip. Trim to fit a 2.5" strip to fit the lower lip side to side. Give the metal the desired curvature. Bond to the lip using high strength epoxy. Clamp overnight to cure fully. Enjoy your new, wave free lip.

[@vinbags]

Came out perfect Bucky..looks killer!

[@BuckyLasekOfficial]

Vincent Paterniti Thanks 👊🏼

[@mattv.7402]

Yes! Would love to see this as a product, along with those large "fender liner" sheets.

[@Yabai__Abyssgard]

Awesome! I'll buy one as soon as they are ready.

[@_justtoomanygames_8857]

You can probably clear the ripple in it if you pull on the lip tight from one end when fitting it and use more screws or pop rivets. Use a screw/rivet say every 8-10cm. You can then smash out of that driveway without it almost pulling off the corner of the lip haha.

[@islanderpride63]

What hardware do you use? Self tapping screws? Bolts with a nut on the back?

[@kirkblackadar7299]

That's rad Bucky! 😄 I legit did the garage door liner lip on the L bumper of my first GC. As a customer of Rokblokz having them on my forester and my f150 tow vehicle rally truck, I know these are going to be top quality! Bucky, if you're ever up here in Ont Canada we can do some good old bass fishing and play with my first gens. Get lippy in 2020🤙🤙

[@BuckyLasekOfficial]

Kirk Blackadar Sounds awesome!

[@jasoneasley9851]

I think it looks really good. You could maybe paint the screws if you don't like the contrast.

[@BuckyLasekOfficial]

Jason Easley I agree, I’ll paint them black when the car is closer to being finished👍🏼

[@niallbooker]

I would 100% buy this!...Already have their flaps and love the material. I've been looking to do this but wasn't thrilled when I went to look at the stuff at Home Depot. Really hope they can hook this up for 08-14's!!!🙌

[@BuckyLasekOfficial]

Niall Booker Rad, it’ll be available soon 💪🏼

[@unagichaan]

My favorite channel out of all the ones im subscribed to. You couldn't have done your install any other way and it looks amazing!!! Looking forward to more content

[@BuckyLasekOfficial]

Jeremy Schoppaul 👊🏼😉 Thanks for watching!

[@jeff666p]

Looks good! paint the screws matte black so they blend in

[@BuckyLasekOfficial]

Wolfy1091 Yup👍🏼

[@martinkovacik1240]

Buck it looks very good with that! Great shape

[@sw1ck3n]

Super sick. I would buy it.

[@SageCraft]

YES FINALLY! I've been looking for this! I even commented on one of your IG posts asking about the custom lip, so definitely interested for my GC8 build as well!

[@BuckyLasekOfficial]

SageCraft Rad, I should know soon and the feed back has been awesome!

[@CetheOhannion]

The tape method is legit. I think I need men some that for my rallycross/hooptieX car. Way better than that home depot shit. Loving the chillhop soundtrack. My favorite channel to turn on and relax.

[@grahamdrope3367]

Editing, tips, tricks and dad jokes are really coming together.

[@BuckyLasekOfficial]

Graham Drope Thanks👍🏼

[@06wrxdude]

Sick idea! That material is solid for sure and looks great too. I like 👍😎

[@zackstephenson1428]

I can’t believe this channel doesn’t have more subscribers.

[@RX7Cody]

Depends how much it cost. The end was dope tho

[@andrewlandes4037]

DUDE! meeting you today was so sick. You're a LEGEND

[@BuckyLasekOfficial]

Andrew Landes Rad spot and good chatting 👍🏼

[@gunandknifenut]

Awesome video. It looks good. Like your way of testing stuff.

[@BuckyLasekOfficial]

John Cline Haha, go big!

[@BossTcg-LiveStreamsAndNews]

Just bought me one for my channels car. So stoked

[@teddyandresjr6467]

I really love your channel making my GC8 build a way more easier!!!

[@BuckyLasekOfficial]

Thanks for watching and stoked you dig the content 👊🏼

[@DirtDude117]

Hey Bucky, this is now available if you want to update your description! Just got it myself. Hopefully they do the fender liners soon too

[@BuckyLasekOfficial]

Thanks for reminding me 👍🏼

[@DirtDude117]

@@BuckyLasekOfficial thanks for doing what you do!

[@curvaholic]

Tastefully done sir car looks great

[@NeverLetOff]

Looks awesome! I need that on my Focus RS for max rally car look.

[@metalthing1]

Monetization..Good for you bro ..On your way..

[@roberthartmann782]

In Maine the Subaru's car sales place needs tell Subaru company to rhino line under neath cars and around outside wheel wells.. they used alot salt on roads during winter. Should be option to pick at dealers. To rhino line the cars and trucks here. Because everyone has rotten rusted cars here. Nothing worth to fix up uphere like your cars. My best friend Russell sylvia has a 69 Camaro sitting around in garage all the time. It's not rust bucket. It's a beautiful machine he built up. But most of it's time sitting in a garage

[@acquacow]

All the GCs rust from the inside out... no amount of underbody coating will fix that. Spent $15k getting all mine cut out and replaced with factory metal.

[@Carbon_Phoenix]

Awesome buck , let us know when we can start ordering them and i think ya need to add some more screws just to be on the safe side

[@rob_boss]

I used aluminum from our local race car supply shop...works well and has character the more is scrapes lol

[@P-body85]

Bucky is pretty much building my dream car...with mods like this one that I didn't even know I wanted.

[@BuckyLasekOfficial]

💪🏼😉👍🏼

[@danielgeorge9565]

Dig it....my bumper is trashed so I was debating the home depot route, but I'll hold off in case this stuff gets made to the public.

[@subiecris2467]

I need this for my RS! I would buy it!

[@bluedeva]

Looks sick! Much more durable than the fibre glass 👌🏻🤗

[@olydella]

Maybe a couple more screws and some washers behind those screws and it would be a little more stout

[@BuckyLasekOfficial]

Moliver Mella It bounced right back like a champ the way it is. That would poke it out and bulk up the clean look.

[@EVDOsmurf]

Bucky, get a DeWalt heat gun and heat the lip.....it will straighten out! Top tip.

[@rudysuarez7670]

Yo, I absolutely love your videos! I saw you featured on hoonigan and have been a fan since!

[@tytus55573]

Nice Bucky I’ve bought myself EZ lip for my 2009 Subaru Impreza STI to get that look. Hopefully it’s going to be a universal.

[@salspec3381]

Looks good! I wonder if installing 3M double sided foam tape in addition to the screws would help secure it better... or maybe just some more screws.

[@BuckyLasekOfficial]

Sal Esposito Tape would make it bulge out more and more screws maybe if it was an actual stage rally car but it bounced right back to shape immediately as is👍🏼

[@salspec3381]

Fair enough

[@johnep403]

I dig it and your style man. Love it.

[@msp2081]

Haven't got the edging from Home Depot but I do have a set of RokBlokz for my STI.

[@georgef1176]

If you go back too or use another carbon or glass lip....... You want the fasteners of the lip to leave play up and down so when you Scrape it just pushes the lip up a tiny bit. That’s how race cars are done anyways. It saves your bumper

[@christopherlong5928]

More screws!!! I think you need to add a few more mounting points to it bro, seems to pull a little bit at the "corner" radius area on the bumper, which can put stress in the screw hole area on either side of the area where the gap is created. If you can picture what I'm trying to say, lol

[@jasonprice1871]

Good job brother I actually thought you were going to use the old one as a template but you did good the way you did it love the videos brother

[@aaden4888]

Yes put this in my shopping cart!

[@DirtDude117]

I would LOVE to be able to buy a pair of these for my S2000 and my '15 STI!

[@subtledriver]

Dude! Nice idea! I'm gonna do this, but with rivets and washers. And probably more holes. Skiiiirrrrt skiirrrrrrtttt hahaah

[@DETCOR]

its so gooOOOD!!!!!! i dont run a front lip cause i made that my life. but this would do it. but will the sun warp it? maybe thicker? or thats what she said?

[@BuckyLasekOfficial]

DET COR That test I did really worked it good and it was right back to normal by the time I drove it back around 👍🏼

[@mattyee9369]

I'd love to look into ordering some for my 06 Legacy GT! Looks rad!!!

[@jungle_jim42]

Hell yeah dude. Been on/off poking around for something similar on my GR, this would be peeeerfect.

[@replicantgc6140]

Spot on the rally lip can't wait to test it myself😏😁

[@abe9112]

BRO THE COLOR OF THE SUBARU🔥🔥😮‍💨 what’s the exact same so I can do mine plss??? Edit : THE BLUE ONE

[@gerardogonzalez-pg8zd]

Looks badass Bucky! Hell yea

[@chriso550]

You the man bucky 🤘

[@user-bx2ts2ih5x]

Love this series binge watched up to here all today. Have you done a video laying out the rough amount you've spent

[@raptoranderson]

I'm gonna be honest, I sought this video out and watched it for advice before going to Home Depot to buy some garden edging ... no clue if you'll take that as a compliment or not lol but I've only seen a couple GRs with lips like that in all of my internet searching, so I guess I'm about to produce GR with rally-style-lip #3 hahaha

[@myaccount1271]

That material would be great for my 03 forester!

[@saltsavagechris]

Honestly I love be the idea... I wonder since I already have rokblocks mud flaps that would go good on my car. Only difference is I have the v5/v6 bumper instead. But just watching you and visualizing the possibilities I think I can do something similar with the same product. As long as they sell it at 88 inches I think I can make it work. And for your taping and measurement job I think that was a good way to do it... #buckyeah

[@BuckyLasekOfficial]

Chris Voulo It will have mounting bracket options for those without a smooth surface to mount to👍🏼

[@rallyritch]

I need this! Just awesome

[@room3radio]

Looking good!

[@BuckyLasekOfficial]

Hawk Eye Thank you 🤙🏼

[@72ablanco]

Going to order the lip !!

[@MPGymkhana]

Yaaa buddy!! Add some more screws and you're golden 🤙

[@projectdreamkiller5556]

If you DONT come into my driveway sideways, you’re not allowed back. Lol.

[@mummx4]

🤣🤙"skrtskrrrttskrr" 🤙🤣👍 love it! 🍻

[@dummyone8488]

This is what I'm looking for, thank you bro

[@twobunz6594]

Fuck yea!

[@spdracr03]

Sharpie screws Black 👌🏽😉

[@derrickray1123]

Looks pretty rad to me! I bet that material lasts way longer

[@RAWTEN]

I need to do this to my evo 4. Great vid!

[@sneakyfingersdevandle8164]

I watch a "pool party" like last week and I swear those young dudes looked they don't know who Bucky is... Wtf, I'm not a vert guy but I wanna shred like this dude!

[@dogstylez585]

Looks great

[@kotaplumbingandheating]

Hey Bucky, what lip is that on your 2.5rs? (blue one)

[@BuckyLasekOfficial]

David Kemp P1 replica

[@kylefletcher979]

Great job Bucky. How much do these cost. Not sure it would look all that great on my 2011 wrx limited 🤷

[@MrGtrev7171]

Bruh...... Perfect!

[@marklipsinic7916]

Needs more bolts to secure it. It just about tucked under the bumper when you exited the parking lot.

[@BuckyLasekOfficial]

Mark Lipsinic It totally tucked and came right back to shape!

[@marklipsinic7916]

@@BuckyLasekOfficial If it tucked under like that, in the right situation, it could end up acting like a scoop and catching the ground. In that situation, it could then end up ripping itself off the bumper cover. That lip material appears to be fairly thick and stronger than the bumper cover itself. I'm just suggesting adding more blots in between what you already have to help prevent that from happening.

[@Grim-STi]

Hell yeahh dude keep these GC8 videos going, currently own one and a 2015 STI I’m a huge subie enthusiast and appreciate your uploads 🙏🏽

[@justamar]

someone needs a impact driver! saves so much time

[@BuckyLasekOfficial]

amar I need a lot of things 😂

[@MrLangleylad]

You're a damb clever boy ! nice !

[@BuckyLasekOfficial]

mike jones Thank you 🙏🏻❤️

[@ianmcfetridge4396]

Looks good maybe throw a screw in between every screw take out the wave

[@Nick-gg6tg]

Love this channel. What is the premise behind this lip? Protection?

[@keiksmt]

love it. So many ideas from this :)