2019-2020 RAM 2500 EzLynk Auto Agent & Tune Installation

[@Patrick_Cashman]

This is one of the best videos I've found on this subject. You don't jump your camera around a lot, you are cool and level headed about all of it, and your explanation of how to go through the process from zero is great. Thanks.

[@BEASTProjects]

Thank you 🙏🏻

[@Dinosbarandgrill]

Keep us updated on how the Emmissions Entact tuning is on fuel mileage and DEF....

[@BEASTProjects]

Next video

[@chuckgivens486]

I’m glad your building a truck again BEAST 3.0 BAAAAAABYYYYYYY.

[@BEASTProjects]

Yeah buddyyyyyyyyyyyyyyyyyyyyyyy!

[@rubberguy1982]

I bought a 2020 ram 2500 night edition fully loaded about 3 months ago. Let just say this truck has everything and full luxury . Best sound system out of any vehicle and just love driving being my first diesel . But it has been in the shop for 2 of the 3 months due to having to replace the transmission. Went in since the check engine light P0740 came on so I figured should be something basic but NO. They are replacing the whole transmission and apparently they are back ordered. They are taking care of me from both the dealer and FCA but this was a 80k truck that I plan on keeping for a few hundred K . I don't want to delete or modify and lose my 100K warranty but after some research all I keep thinking about is the damn cp4 pump. Im not worried about the trans as I know the dealer will take care of that but this cp4 pump can be a disaster . I just hope its not as bad as the forums make it out to be. It seems all the people talking about it but not many have had it happen. anyway just a little vent for the day. Great video man!

[@BEASTProjects]

Thanks buddy, sorry to hear about the issues you are experiencing. I’ll be doing a video about the CP4 during an upcoming install. I’m not going to swap it right away & I’ll explain why. Thank you for watching.

[@Coaltrain87.]

Your lucky I bought my tradesman last year and the transmission gave me problems at 300 miles! They won't honor it either

[@wreckitmech306]

They are doing a current recall on the pump. Call your local dealer. I got mine done at the beginning of July. CP3 2020 RAM 3500

[@JesusFlores-sq3pc]

I just had my CP4 pump changed on my 2020 Ram about a year ago. They did the recall. Seems to be working fine. The CP4 was loud. The new CP3 is quieter.

[@atctraveler6218]

Good to see you back in a Ram..

[@BEASTProjects]

🙏🏻

[@juansantiago1441]

@@BEASTProjects Will the EZ link void the warranty? Are they able to scan the truck and see if it was tuned with it?

[@BEASTProjects]

Yup, most likely.

[@rmack3595]

Love the little details in all the video’s really helpful.

[@anthonysourdiff1835]

Good to see you guys working together

[@Jay-l9p5c]

Does the ezlynk come with everything

[@skillsk8r]

Do these EZ link tunes work for non deleted or does your truck have to be deleted?

[@stevereese6488]

That phone mount looks a lot like my bullet point mount I got on my 19 big horn lone star mega cab 3500 ho Cummins with Aisin transmission.

[@EKevanEK]

I see your running 225 trans line pressure did you do a valve body upgrade?

[@pioapostoli3923]

Great video! Just wondering did you do it EGR delete or did you just tune the truck? And how much fuel mileage did you gain ? Thanks

[@JackilusMaximus]

Great vid!!! What led work light is that?

[@kingbee086]

Awesome content 👍🏾

[@rogerm6069]

You put it on the 80 Hp tune could I later download the 200 hp tune. Or is it stuck on 80

[@HostileArctic]

Very Nice! Plan on doing this to my 2020 2500!

[@kenb.9976]

Are the tuning options extra or are they included?

[@hunter_uriel8676]

If I had SOTF. Would you I stall the switch after or before the tuning with ez link

[@LarryRichelli]

So do I delete then tune or tune then delete, I am new to this.

[@MrFelix002]

Great install very informative

[@husseinalyahmed1477]

Hey brother if I have a efilive do I have to wipe it before I hook up the ez link ??

[@GrimmGrimm72]

So did you have to purchase the tuning package with the EzLynk, or does it come with some preinstalled?

[@johnthoreson13]

What muffler would you recommend for a 6.7 after delete? Stock 4" looking to make it quite again... thank you

[@edt689]

I haven't done a delete yet becuase my 2019 cummins still has warranty. I schedule a cp3 conversion per recall at dealer this wk and i got a feeling they well reflash pcm to newest tune and I've been hearing it locks out any future tuning. Is this tuner still able to tune newest oem reflash?

[@zachholcombe]

Does it get rid of the factory torque management crap

[@varnell999]

Hey do you leave your Easy link connected all the time? Or disconnect it ever time you leave the truck? Will it drain the battery if you leave it connected?

[@debrarobertson1928]

Having problems have not got ez lynk to connect to phone have 2020 Ram 2500 with unlock cable. Any help would be appreciated.

[@dannymelanson5942]

Does it take the speed limiter off

[@blakegilpatrick9591]

Awesome video man! Where did you get your tunes?

[@rickbutcher5583]

So this is the EZ LYNK AutoAgent 2.0 w/ CTT 2019-2021 Ram Lifetime Support Pack? Also, which of these options did you select ? Include SOTF Switch? Trans Tuning (68rfe Only) ? 18+ RAM SGM Adapter? thanks in advance, just want to make sure i get the right product with the right options chosen

[@okc_garage]

Love the bloopers. That was hilarious.

[@BEASTProjects]

Haha 😆 We go at it sometimes.

[@okc_garage]

BEAST Projects second gen swap soon? “cough cough”

[@BEASTProjects]

Researching now, I may wait for WCFab’s Kit. Haha

[@skycowboy_7391]

How come nobody says anything about how low the ex link hangs down out of your obd port you can hardly get in and out of the truck without booting it 😢

[@billiondollardan]

Great video, man! This was really helpful. I just got my 2500 so I want to put about 20k miles on it before I tune it, but do you think Ez Lynk is going to be better than the Banks Derringer if they ever get it done for Ram?

[@nitrotmann]

What trans does beast 3.0 have?

[@BEASTProjects]

68rfe

[@hemiedup5501]

That grill is wicked is it oem

[@andrewbakerim5474]

I’ll be honest the mount you used is awesome I use the one with the ez link it’s ok but it falls off every now and then it losses suction BTW i love the truck man

[@BEASTProjects]

Thank you 🙏🏻

[@zetnompainting]

Does this void any warranty bro? I have a 2021 dually limited edition night edition mega cab 6.7 Cummins HO and would hate to void my warranty. Any info would be greatly appreciated new subscriber here awesome videos

[@witkr904]

Only if they can prove your delete caused the problem.

[@zetnompainting]

@@witkr904 oh really word

[@DomDavidson]

I have never dealt with a delete ram and warranty but I have experience with other manufacturers and tunes I’ve done. They will do anything they can to blame the tune/aftermarket work. Anything to get out of doing free warranty work.

[@seanriley3882]

Congrat, buddy. did you delete the emission

[@BEASTProjects]

Still intact

[@manuelestrada1827]

Are you planning on going to Mexico? To make your truck run a little better hint hint or leaving stock.

[@BEASTProjects]

Off-Road Race Truck 🙂

[@manuelestrada1827]

👍🏼 awesome truck man

[@mikemontgomery4378]

Nice video....great upgrades....Very Informational....

[@BEASTProjects]

Thanks Mike!

[@tonyh.4395]

Great stuff brother...!! Enjoy your content sir. I'm been holding back on tuning my 5th Gen due to the vulnerable CP4 pump setup, even though mine has the latest updated CP4 version. But that EZ Link definitely looks EZ 😁. I noticed you truck has/had a left front TPM sensor warning just as mine does. Mine popped up suddenly, thought I had a flat but tire is full. Guess it will make its first trip to the dealer. 😒

[@BEASTProjects]

Thanks Tony.. I actually solved the TPSM light w/ the EzLynk, stay tuned for the next video.

[@tonyh.4395]

@@BEASTProjects Awsome looking forward to it brother...!!

[@NordicNevs]

If you unplug the EZLynk for other OB2 you just lose gauges and monitoring / data log on your phone correct? Tune should be present

[@BEASTProjects]

Correct, the tune stays written to the ECU.

[@tjsquib8359]

anyone got a link for the bypass cable

[@sonnylopez2424]

If I am about to download ez lynk and my vin is correct but says duramax tuner inc. should that be a stopping point I’m assuming it should say Cummins ??

[@BEASTProjects]

I would contact your tuner before you go any further.

[@johnnybags87]

Who did you use for tunes?

[@BEASTProjects]

Hit up garofaloent.net

[@zachholcombe]

Does it come with intact and off-road tunes or just one or the other

[@BEASTProjects]

You’ll have to check w/ whoever tunes your truck. All tuners have different options.

[@zachholcombe]

Looking at going through the same as you if that helps any

[@jtent1920]

But does this tuner cancel out ur warranty?

[@alexisdelgadillo8017]

I would also like to know ?

[@BEASTProjects]

Yes

[@josel8476]

Quick question, my 2020 Laramie came with something already plugged into the ORBD port. I don’t know what that is hooked up to?? What do I do if I decide to go with the EZ Lynk? Sorry I’m new to this diesel running stuff.😂

[@BEASTProjects]

I would hit up Garofalo Enterprises

[@20scarecrow04]

Have y'all found some reliable LED replacement bulbs? Our local aftermarket shop said that ram does not support them very well 🤷🏼‍♂️. Got a 2019 bighorn.

[@kirkketelsen7695]

headlightrevolution. Had mine for a year now. Very good

[@BEASTProjects]

Second HLR

[@ramonvega6106]

For the 2020 Cummins the wed site only says 2019 and I know the enigine had revisions for 2020

[@BEASTProjects]

I would email them. They will need your VIN to confirm your trucks information.

[@Renoman86]

2019 and 2020 are the exact same engine! No difference. Except the cp4.2 revision halfway through

[@davidagurcia7518]

do you still have the stock exhaust?

[@BEASTProjects]

Yes

[@davidagurcia7518]

@@BEASTProjects would this void your waranty

[@garycraig4277]

So I’m an idiot on this where does the tune come from

[@chrisdancel9196]

Hey, i was wondering if you have ever had any lost communication codes pop up on you? cause ive been having them pop up and ez lynk support hasnt been much help

[@BEASTProjects]

One time, but then I got a notice for a firmware update. I updated & no more issues since.

[@chrisdancel9196]

@@BEASTProjects because they told me to wait for another update and i installed that but kept having the same issues, but thanks!!

[@mikestrucks]

Nice one 😉👍🏻

[@g1mpster]

10:03 “go through the bottom”...that’s what she said 😂

[@ikeobuekwe]

Scat pack gone?

[@BEASTProjects]

Updates coming soon

[@ikeobuekwe]

@@BEASTProjects Perfect , thanks brotha

[@dannymelanson5942]

Awesome video

[@BEASTProjects]

🙏🏻

[@yohnny8839]

Keep this one this time.

[@BEASTProjects]

I hear you lol

[@johnkiser969]

👍👍

[@briank.3539]

Very informative. Did you mention that you could unlock up to 200 hp with this tuner? I assume that they will have one or bring one to market for the RAM TRX. I awaiting my TRX to arrive. Thanks for the video. Stay safe.

[@BEASTProjects]

I’m sure there will be!

[@jamessagar7080]

Nice Nice !!!

[@smokeyphil7427]

Nice, now when the cp4 goes you won't have a warranty.

[@BEASTProjects]

I’m swapping that, it’s all good.

[@Shad0wC0mpany2]

@@BEASTProjects Which CP3 kit did you choose to go with?

[@BEASTProjects]

Still researching S&S & Industrial Injection... Leaning toward S&S.

[@lg3822]

Brandon at Industrial injection is awesome to work with. He always answers the phone or calls back to answer questions.

[@husseinalyahmed1477]

Hey brother if I have

[@husseinalyahmed1477]

If I have a efi live do I have to wipe it before I can hook up the ezlink ?

[@kyleharris1627]

thanks Bro

[@BEASTProjects]

Merry Christmas

[@ralphnovak5727]

Blow up all Rams. Not worth ownin!

[@eman1757]

You too goofy 🙃.

[@BEASTProjects]

Yup

[@husseinalyahmed1477]

Hey brother if I have a efilive do I have to wipe it before I hook up the ez link ??

[@husseinalyahmed1477]

Hey brother if I have a efilive do I have to wipe it before I hook up the ez link

[@justinwalters7319]

I believe you have to go back to stock when switch Tuner devices..