Toyota Camry Oxygen Sensor Replacement 2007 to 2011 bank 1 sensor 1

[@handyatmusic]

2:33 Wish you showed how to undo the clip on the upstream sensor, I couldn't figure it out - 2006 Camry

[@RANDOMFIX]

I show it on this video kzbin.info/www/bejne/i2GQYYuDjLdmpdksi=7jV48uwFcldtAUnq

[@handyatmusic]

@@RANDOMFIX Thanks but on both videos you just say push down, and your hand is in the way. What are you pushing down? Maybe mine's just stuck, I don't want to break it forcing it out.

[@juanleyva7411]

Good video Thanks.

[@ArbazBamboowala-d2w]

My engine has a bad vibration, i changed two engine mounts. Do you think is it because of bad oxygen sensor, camry 2009

[@khalidromman1702]

Thank you. That was a very clear.

[@RANDOMFIX]

Thank you for your feedback, much apprecated!

[@albertosevilla5758]

I have a toyota camry 2007 and my sensor is on top of the muffler on the front that is bank one sensor 1 is the same thing like the one you working on it.thanks

[@RANDOMFIX]

Glad to help. As a smaller KZbin Creator, my channel runs on the generosity of viewers like you. ☕️ ☕️☕️Buy Me A Coffee! www.buymeacoffee.com/RandomFix

[@TulyHab]

Do you by chance know the sensor parts number? Amazon no longer sells it.

[@RANDOMFIX]

I would look on rockauto.com became there are different part numbers when it comes to emission parts as California emission vehicles will sometimes differ.

[@antoineg3451]

Cool, this would of been great 2 weeks ago

[@sirsweetness8332]

You put old one back in. ???

[@RANDOMFIX]

my o2 sensor was fine, I was cleaning the catalyst via the o2 exhaust port.

[@godspowerogbuokiri9378]

In the place where there is no catalyst in the exhaust manifold, will the O2 sensor be working properly?

[@RANDOMFIX]

Sorry for the late reply, I appreciate your feedback did you get this handled?

[@jvo8068]

How do you take that disk thing off when putting a new 02 sensor?

[@RANDOMFIX]

I appreciate your feedback Sorry for the late reply, did you get this handled?

[@waltersweet4595]

It comes with a new “disk”. Look up the Denso air/fuel ratio sensor for this model and you will see they all come with a new heat disk.

[@kuangan8480]

Good thank

[@RANDOMFIX]

Welcome

[@airon6864]

Do you need to un plug the battery? Or is it ok to leave it ?

[@RANDOMFIX]

Sorry for the late reply! did you find a solution?

[@katanauwu7200]

😂 there’s a plug for it. You can just unplug that…’i think’.

[@COLINary]

NICE VID

[@RANDOMFIX]

thank you for the feedback!

[@miracle5140]

is the anti-seize really necessary?

[@RANDOMFIX]

Not necessary until it is.

[@aknowledgeableworld4478]

Dude you got a lot of videos

[@RANDOMFIX]

Thank you

[@Better_Call_Raul]

There are two upstream sensors for my 2004 camry 4 cylinder 2.4L. First sensor is Air Fuel Ratio sensor Bank 1 Sensor 1. Second upstream sensor is Oxygen Sensor in Bank 2. Is this video showing air fuel ratio sensor in bank 1? Or oxygen sensor?

[@RANDOMFIX]

Upstream bank 1 sensor

[@Better_Call_Raul]

@@RANDOMFIX So there are two upstream sensors. One upstream sensor on bank 1 and another upstream sensor on bank 2. This video is showing the upstream bank 1 sensor. If the upstream bank 2 sensor was bad, you would get a different message for that. Correct?

[@boomka]

My replacement part doesn't have the shield. Is it neccessary?

[@RANDOMFIX]

Sorry for the late reply! did you find a solution?

[@jessi.drahks]

I had the same question . I bought a replacement for my 2007 Camry XLE 3.5 L , Bank 1 sensor 1 replacement doesn’t have a shield . Is it necessary ?

[@RANDOMFIX]

It’s not necessary but if you there are any wires or or plastic components close by please cover them.

[@neilwilliams2193]

Did you know that if you soak your oxygen sensor in toilet cleaner for about 15 or 20 minutes then wipe it dry. Now you have a new oxygen sensor.

[@RANDOMFIX]

Really? Which toilet cleaner?

[@logonalmay9056]

How do yoi know its bad or good

[@RANDOMFIX]

For the upstream o2 sensor, it has the a heater built in that easy to test and for the o2 sensor portion of this same o2 sensor you need to check the live data and analyze it. The down stream o2 sensor has no heater and again you need to check live data on scan tool and analyze it.