DIY Toyota Sienna Brake Pad Replacement 2010-2019 & Front Brake Rotors

[@CarlosReyes-sb7sk]

Thank you for the clear explanation. I will do mine now!

[@RANDOMFIX]

Glad it was helpful!

[@cynthiastockton4328]

​@@RANDOMFIXto

[@cynthiastockton4328]

People looking I'll km kk my lau no L ml my It Okay kk like

[@aochio9735]

extremely good video! I found it is hard to insert the inner side brake pad. I didn’t use the old brake pad hardware, what I did is to clean the hardware seat again and it works haha

[@RANDOMFIX]

Glad to help and thank you sharing your technique!

[@jammRJ]

@@aochio9735 I usually fit the pads while the bracket is out and depending on the pads you buy , you might need to file the pad edges a bit so that they fit easily . Then you can be assured that they will slide in easily after the bracket is mounted.

[@Powerstroke98]

Thanks!

[@RANDOMFIX]

Glad to help

[@junkersreview]

Is the brake flush needed ?

[@RANDOMFIX]

It’s better to do it before it needed. It keeps the parts from failing.

[@manhhungnguyen8597]

Great, thanks ❤❤❤❤

[@RANDOMFIX]

You're welcome 😊

[@ChristopherVigilgte037p]

Why silicone paste and not just grease?

[@RANDOMFIX]

Better glide and less chance attracting dirt. No major grease build is also prevented. The paste is expensive!

[@jammRJ]

Use a deep throat 😂 C clamp from harbor freight to compress the caliper pistons , use the old pad between the clamp and the pistons . It also doubles as the 'third hand ' while you put the springs on if you dont have a camera man around 😂

[@RANDOMFIX]

Yes, the c clamp is a good tool. Thanks for the feedback and tip.

[@Yoyomanmanholla]

Why no gloves bruh?

[@RANDOMFIX]

Sorry for the late reply! did you find a solution?

[@joshstanman]

Bruh likes raw doggin' a brake job.

[@atibbs14]

Lot of meat left on those pads. Why did they need to be replaced?

[@RANDOMFIX]

BIGO told my brother to replace them??? They gave him a really high price so we decided to do it ourselves. All good for less than $150 we got new rotors and pads.

[@johnrose2348]

The rotors were warped obviously, that was the reason for the braking vibration and with the rotor vibration, they also cause the brake pads to wear unevenly, hence the replacement.