RESTORATION The Most Destroyed & Rusty Angle Grinder you never seen before - Kinda IMPOSSIBLE Repair

This was the most challenging and hardest restoration i have ever done. This was a really impossible restoration to do even i was thinking to gave up but i intended to do it and finally i did it and the whole video is infront of you. The most difficult part was to pull up the ARMATURE but the Screws were also hard to take out because they were all Dissolved in the rust and whenever i tried to take them out they simply broke but i used some specific techniques and Finally i opened all the screws.
Secondly After opening the screws the challenging part was to open the Aluminium head i spent alot of time on opening of every single part of this angle grinder Even the Axle inside the gears was broke that was so disappointing.
After that i just putted alot of force on opening the grinder head due to the force, head broke down but there was an advantage. A year ago my Bosch Grinder has Exploded due to high temperature of usage That was way very similar to this Model of Angle Grinder so i used most of the parts of that Destroyed Bosch Angle grinder.
I almost spent two days to open the Armature of this grinder even i used different techniques but all in vain. At the End i got an idea to make an hole from the back side and that worked really well and it was even my last hope.
But Thanks to ALLAH ALMIGHTY. He is the creator and the perfect Helper for me
At the end of reassembling this Grinder i made my own logo of Random Hands and attached to this grinder because i dont know the company of making this model. And i think i am the new creator of this Machine so it was not the bad decision to put my own logo on it.
RESTORATION The Most Destroyed & Rusty Angle Grinder you never seen before - Kinda IMPOSSIBLE Repair
#RandomHands
#Restoration

[@-Deena.]

Using little more than determination and patience, it went from junk to a really useful working and honest tool. Complete and heartfelt praise is well deserved 🧡 Thank you!

[@arshadislam7525]

Mashala

[@rodelincruzat2604]

@@arshadislam7525 q

[@ahmedvip2964]

😊🌹

[@josimuddin7644]

ল

[@dineshneel8517]

☝🦊

[@stevenwoods1374]

You Got Yourself A New Grinder Tool 🤝🇺🇲❤️♥️😋😍🔥👍🤙🤙🤙🤙🤙🤙🤙🤤😘😘😘😘😘😘😘😘

[@pinSjon79]

You gave this tool a lot of love and a new life. Now it will be useful again. This was very satisfying to watch unfold. Great job.

[@Bunsy95]

Now that's what I call RESTORATION. No fakes. Just straight up talent and skills. Almost impossible to repair, but you did it. Thanks for the upload.

[@tonyhernandez3227]

You are selected to the Restoring Hall of Fame!!!! Wow impossible to restore but trying to figure out how to find another alternative. Never give up!!!

[@juanpablososa5961]

yes

[@Potatobrains_]

This should be the benchmark that all future youtube restorations are measured against. This thing has been to hell and back and you resurrected it. Good on you.

[@operationrestoration3280]

Mike Belcourt totally agree mike Iv just started a Restoration Channel hope you get to have a watch would love some feedback :)

[@clint2284]

Amen

[@nickdoeseverything431]

You ever seen a video from MyMechanics?

[@operationrestoration3280]

Nick I have he's really good

[@lumgs2009]

I can't believe the patience and persistence on this piece.

[@KLP99]

Good job! I'm impressed. I would have thrown it away because of lack of patience. Especially seeing the wire

[@FranckEhret]

We all agree no? Normally, it doesn't worth it except in this situation to show the amazing repairing skills? Bravo! :-)

[@yuiiitmpn834]

Llll

[@_Delirium_Tremens_]

Рестовратор от бога. Здесь прекрасно все, начиная со сломавшегося рожкового ключа, заканчивая мытьем корпуса редуктора, перед тем, как он будет выкинут. Судя по скрежету, который издает УШМ при работе, жить ей не дольше полугода, при максимально редком использовании. Ах да, чуть не забыл, отдельный плюс за прозвонку статора с ротором и за подшипник, надетый на ротор пальцами и без труда, потом, вставленный в корпус. 😆

[@Mad9977]

what a mess that thing, but you did a great job, respect 😎👍

[@duongdo4611]

Ịpizj

[@timhvac6869]

Absolutely incredible I would have given up but it's amazing how you can make trash into treasure.

[@marcusdoolette1547]

Well that was heroic. Nicely done. Good thing you had some parts lying around. Lots of work in that one. Thanks for sharing.

[@jesusedgardopila4889]

Very Good

[@Mel0763]

Since you brought it to life using it’s own parts, as well as those of another, it should be called “Frankengrind”! 😀

[@Enitity41Crota]

Clever.

[@vikasbajwa3272]

3

[@russelblackwell6041]

frankengrinder

[@butchbanaga9854]

@@Enitity41Crota vvçç4 Ni By Dr see ni

[@rafikmanukyan4694]

Ճճօօօօօօօօօ

[@williamstyers4264]

You, sir, have the patience of a saint. My first impulse when faced with the stuck armature and other parts would have been to toss the son of a gun into the trash. Great work in restoring it !!

[@hazzasazza444]

Man you did such a good job. Restoring damaged plastic is a hell of a task and especially the challenge you had dissembling the various parts at the beginning it’s great you stuck at it and saw it through.

[@SARSteam]

Wow, now that was amazing :D I did not have hope for that grinder. Well done sir ! btw: Some bearings can open from the side so you can re-pack them with new grease for a longer life. Thanx for sharing this video.

[@pedroventura5925]

A

[@RobertPatrician]

That was like a gruesome autopsy.

[@bojidarvasilev8854]

🤣🤣🤣🤣👍

[@anthonycphillips2430]

That's a no shitter.. hard to watch.

[@whoelsebutgod]

Honestly not the most beautiful restoration I’ve ever seen but by far the most impressive. This is wild that you got this back into working order.

[@AndyMarsh]

Worth repairing? absolutely not.... Worth watching someone repair? Hell yes! Good job.

[@anthonysantiago1999]

May I suggest wire wheel prior using penetrating lubricant on the screws otherwise great job.. Love the persistance.

[@hamouannaba7043]

الله يبارك فيك خويا مشاء الله عمل ممتاز وجد متقن توووووب

[@محسنشراحيلي-م8ض]

وربي مبدع احنا العرب ولا نعرف لا شي

[@jorgegoncalves366]

Parabéns meu amigo, grande capricho 😊

[@catworld4654]

You and awesome restoration are in another level, i cant find good quality restoration channel like you two

[@mohammadirfansanglikar220]

Genius very beautiful grinder very hard work

[@TIRestoration]

Great job, that you still managed to get the armature out in one piece

[@Ashkorya]

It was a real challenge, and you took it up. You are really patient, courageous, and talented. Good work

[@operationrestoration3280]

Ashkorya Iv just started a Restoration Channel hope you get to have a watch would love some feedback :)

[@kingjamesmarcell]

every time you take another piece off I think to myself omg

[@williambarrigaz8862]

Amigo éste fue el renacimiento de un Gran Esmeril por un excelente técnico , que persistencia Amigo , felicitaciones 👏 👍 un precioso trabajo 👏

[@wahyuhidayatullah76]

Kalo memang ada yang ribet, kenapa harus nyari yang gampang. Good job👍🏼

[@BITTYBOY121]

Well done man ! - You did a great job restoring that angle grinder - It is now a useful power tool once again 👍👍👍

[@vitordesousa3542]

there are people who don't know when to quit and there is this guy who laughs in their faces

[@user-rp3vf3se1p]

Yes, I love his perseverance! If man is capable of this, imagine what God can do!

[@anggararicad851]

L.D... Wow, thank you. You are truly godly man.

[@nightriderrv1139]

That was awesome I really didn't think it would run again Super Job !!!

[@RajendraSingh-px6mq]

Very neatly restored and I took a keen interest how you have managed and restored it well done sir.

[@Multantechinfo]

Unbelievable restoration

[@telmabastos6187]

Parabéns 👏👏 amei ver o que você faz, como deixa tudo novo e funcionando.

[@busracansuakyol]

I would already smash it with hammer in first 10 mins..😳

[@kodeik]

is what he did

[@vvcreationz4224]

Sexvideos

[@mesutcavusculu1113]

Oha Türk 🤭

[@busracansuakyol]

@@mesutcavusculu1113 😃😃

[@7wellman7]

Хорошая работа! Да, новые ключи сейчас не те пошли, металл слабый, поэтому надо восстанавливать старый инструмент. Оригинальный редуктор был поинтереснее. Для себя понял, что нужна ударно-поворотная отвёртка для таких дел.

[@abu-waleed]

إستعادة مثل هذه الخرده ذكاء وحب للعمل وإبداع رآئع جدا

[@KielMartinCisco]

Stranded wires under a screw with a vibrating device, I would of did that different. Other wise, this is a great worthy video for anyone who would love to redo their own Reciprocating Saw (sal saw). You deverse a standing ovation for this video champ.

[@mattmcd31]

You are a friend to all hand tools, even the ugliest ones!

[@operationrestoration3280]

Matt McDonough haha hey Matt Iv just started a Restoration Channel hope you get to have a watch would love some feedback :)

[@maszlagma]

Good job! This shows great dedication and material knowledge! Although may I ask I didn't see you put any lubrication inside the motor, did I just miss it?

[@jockdias4830]

The bearings appeared to be sealed units, so they were pre lubricated (greased)

[@bhromonpipasu729]

How much price of a new one?

[@ShantanuSharma]

Looks like it was last used in Neolithic era and they found it inside a pyramid or something

[@JimAustin]

Lol! IKR

[@besnikmehmeti2740]

Lol!!

[@nassimenassime4989]

نللتزةةة

[@avinashkadam3716]

Best restoration in the world I've ever seen before. Amazing patients and determination levels

[@monsieurheathcliff1420]

Great patience to restore something that most would've thought was beyond redemption. One thing though, you have come a long way since then, as far as spending time on making it look good. If you were doing it today, you would've spend time filling the pitted body with putty, sanding and then applying coats of primer and paint to give it that shiny, new look.

[@leticia9281]

For the first half of the video I just kept thinking “omg it only gets worse”

[@Crossgaming66]

He sprayed the WD40 and trying open in 1 second let then thing do it's work then open it

[@503osito]

On the minute "10" i was like damm this video is wasting my time. But i again at the same time i was so curious on how this video was going to end. And honestly. . . great video . . . Saludos deade Portland Oregon 👍😎

[@_Marcia_]

_Excelente reconstituição, e ainda de quebra vemos como é por dentro a ferramenta. (Esmerilhadeira)_

[@_Marcia_]

@@azadrestore Excellent reconstruction, and we will still know the mechanism from the inside. (Esmerilhadeira)

[@_Marcia_]

@@azadrestore I'm Brazilian 🇧🇷

[@زينالكعبيالعماري-ك3ط]

wow 😍 you hero 💪✌️ like your work from iraq 🇮🇶

[@yoalepa]

Hiper admirable tu paciencia ... que buen trabajo has hecho, te felicito!!!!

[@izenincursia2344]

Let's give him TITLE OF RECOVERY MASTER

[@andreyk8181]

Разломать редуктор, корпус, ротор и шпиндель, а потом собрать одну болгарку из трёх - это не реставрация, а рукожопство.

[@Ginzo.origin.]

Только момент снятие углового редуктора,хрен забивая на снятия стопорного кольца чего стоит)))))

[@style3211]

@@Ginzo.origin. я тоже угорнул ) нихрена себе думаю ресторейшн ))

[@ВадимКузнецов-ъ7и]

...он не реставрирует, а восстанавливает,- доводит до рабочего состояния😉!!!

[@style3211]

@@ВадимКузнецов-ъ7и а заголовок видео об обратном говорит )

[@andreyk8181]

@@ВадимКузнецов-ъ7и восстанавливают до первоначального состояния, а тут сборная солянка плюс частично уничтоженный корпус.

[@as_1803]

Болгарка времён великих Фараонов ☝️🤣

[@Tesla.Channel2024.]

Men that grinder is a legend. Restoration doesn't apply to fake grinders. They burnout before they get rusted.

[@muddyexport5639]

Awesome restoration and they said, "it couldn't be done!"

[@miguelvazquez2436]

You give life again this tool my friend thank you for showing us

[@pavangurjar2481]

Fgjiugsgveblsubsn

[@pavangurjar2481]

Dfowggeeveb I am so late in

[@pavangurjar2481]

Fshjeheitk

[@pavangurjar2481]

Gsjudgejejd

[@sidsimon5963]

After 10 minutes I had to wash MY hands. Where was this made ? ? Cuba ? ? All jokes aside, I have to tip my hat to him for perseverance in the face of a long series of setbacks.

[@osmanyilmaz4360]

one of the hardest restoration i have ever seen, nice job!

[@fabriciooliveira8943]

MAlco

[@luciuscrusan5141]

Angle Grinder: let me die Random Hands: No! You’re worth saving!! Spongebob announcer: 33 minutes later Angle Grinder: I....I’m beautiful 🤩

[@five0pd310]

@ 13:15 he pours kerosene on it. I have to say I was a little disappointed that @ 13:20, the next step wasn't a lighter. You have far more patience than I.

[@nathanr.8556]

lmao

[@dennisfahlstrom2515]

I’m amazed at your restorative skills but I wondered to myself, why is an obviously skilled machinist spending so much time rebuilding such a trashed piece as this grinder when you could build a better one from scratch that has a longer expected life cycle than restoring this? I do appreciate your ability to keep these rusted out tools out of the land fills but at what level of deterioration does this become wasted time?

[@michaelbissoon1427]

Right

[@Aptypuo_MowHbly]

Классно реставрировал ! Сломал половину того что было и тупо заменил запчасти, вот это реально уровень рестоврации xDDD

[@jilmartirez3847]

I'd rather buy a new one, than to restore this grinder, not unless it has a sentimental value. But I realy appreciate the creativeness and patience of the one working it

[@1leggeddog]

ok that was impressive

[@operationrestoration3280]

Karine M Iv just started a Restoration Channel hope you get to have a watch would love some feedback :)

[@2바이오]

Hsusieieuddj

[@МаксимЧернов-д6и]

У меня иногда складывается впечатление, что автор специально закапывает на заднем дворе всякий инструмент на годик, а потом откапывает и восстанавливает ))))

[@МихаилБерезкин-у3о]

Для контенту полезно оживлять зловещих мертвецов

[@Teenych]

Ну, эту болгарку он хорошо закопал.)))

[@XLegion_]

Тоже была такая мысль, много однотипно выглядящих в плане внешнего вид вещей: "сырая" ржавчина, белая окись. То есть, лежали вещи в сыром месте.

[@Krasnov_Misha]

Не тебе одному. Они их в бочках маринуют. Так делается контент. Если реально гнилую вещь начать реставрировать то там ничего не останется, а тут ржу сняли и все

[@АнтонБезуглов-з3л]

И утапливает))

[@chocolatefrenzieya]

I have never seen a wrench break lol!

[@RandomHands]

This was first of mine too.

[@2바이오]

그라인더수리가격은오만

[@Hoochenny]

Man i wish i could forge and dismantle and repair stuff like this guy

[@denverdanoreno]

Good job vato. Keep it rolling! I'm very happy you have great purpose in your life. Stay humble, and great things will be made of your hard work. Dan Fredericksburg Va. 9-4-20

[@borgescarservice3643]

👏👏👏 gosto muito de ver restauração, parabéns!!!

[@arfatarfat8815]

Armitiure fild COILS marrage and mingle 🥰

[@曾忠廣-t5g]

What an incredible repair

[@themirror7521]

Successful efforts, weldone

[@wassupjg]

Wonder what the original brand was/is (I'm aware it's a "Random Hands" now)

[@ceferistul05]

judging by the color either flex or hilti

[@Эдэльвэйс]

Парень тебе респект за золотые руки , настоящий мастак

[@mary74724]

amazing restoration, you are genius, thank for sharing

[@JR-zm6nx]

One of my friends at school said this channel was his he's in 8th grade

[@HayderAlNaqqash1964]

This is the spirit of accepting the challenge I wish i had only 50% of your determination

[@charlesstephens2651]

I would have done gave up on it and went and bought a new one.....good job RH!!

where you found this grinder? from the depths of the ocean or somewhere? :D

[@ceb964]

I gave up at 14:00 when the wrench broke while trying to move the armature, as failed attempts of restoration were rapidly turning into a rather ugly post mortem dismemberment... 10/10 for trying though.

[@thekelpayton]

WOW! Beautiful job, much respect.

[@chrissaucier9386]

Looked like it was lost in the pickup bed for a few years under the toolbox

[@operationrestoration3280]

Chris Saucier haha that's what I thought Chris Iv just started a Restoration Channel hope you get to have a watch would love some feedback :)

[@irfanbilgen8652]

@@operationrestoration3280 kiminin immünolojik in iki önünün km km km o önünün iklimi iki imik iki kiminin ml ol km k köyü p ko 9 ko 0 M9 M9 ko ko

[@محمدالموصلي-ف8ظ]

ارقى واجمل تصليح احسنت باركك الله

[@da64v62]

自分はこういう修復作業をする動画チャンネルを見るのが唯一の楽しみですね。普通ならば。こんなになってしまった工具は大抵。廃棄してしまいますが。こちらの動画チャンネルは神業ともいうべき！新品同様に直してしまうのですから。すごいですよね。

[@TheOlvan]

Amazing! Even if I could do what you do (which I totally can't!), I doubt I'd even bother with something that destroyed. Huzzah to you, my friend!

[@mdtaibulislamshanto8828]

That's call a real restoration🖤🖤

[@albertmartinez6621]

WOW THAT WAS AWESOME WORK GOOD JOB WOW

[@80HD8]

Very nice. turned out great.

[@edgardolorenzo1797]

This one of the most impressive restoration i have ever seen..great job!

[@tadwiltman4875]

Very respectable work!

[@raoulraoul9836]

Very good restor!!!

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@drishratdar]

What a feat. Simply amazing. !!

[@gustavorobledo7310]

me sorprendiò que los cables de campo y de la armadura aún funcionará... no le canbiaste, solo lo dejaste ahi y aún asi funcionó.. 🤔

[@timz7171]

when I watch these restoration videos I always wonder where they find this non ending stream of rusted old tools.

[@ramaferdiansyah4384]

Warga +62 like dong sini kumpul bareng 😂

[@_djeazzy5939]

T

[@arshadasif6185]

Excellent job!

[@bladexplays2007]

What a power of nitric acid 😳😳😳

[@Pure_KodiakWILD_Power]

😂 now you can use this restoration to help restore future restorations.