Raspberry Pi PICO Arduino IDE Support - Official & How to install

[@arnavpawar8602]

You are very underrated. Nice and creative videos

[@SobhitPanda]

Hey thanks a lot❤️ I will always remember your support ☺️❤️

[@rifattarkyararbas4058]

It is so helpfull. Thank you very much.

[@ganesha8792]

Subscribed Vro👍

[@sumanlatapal885]

Good work! You deserve more subscribers

[@dipenkumar6526]

Editing and presentation was so dope 🔥

[@ElectroPoint4u]

Nice tutorial. Keep it up

[@SobhitPanda]

Thanks for the motivation

[@sambitkumarvlogs]

entry was awesome.. hahaha

[@SobhitPanda]

Hey buddy i knew it😂

[@sambitkumarvlogs]

@@SobhitPanda baba ,sab jante he😂

[@Athens1992]

nice video, can u run headless code without open serial monitor?

[@bullygram]

This is Brilliant

[@SobhitPanda]

Thankyou so much ❤️ Hope you Subscribe to support my work😁.

[@testtest-sk8ne]

When i unplug the pico from computer the code stop working .. can you guide me why and how i keep it run when i unplug and give only power to pico?

[@SobhitPanda]

Ok, what are you trying to do. Blinky / Hello World or ....

[@SobhitPanda]

Again make sure you supply power to correct pins - Check the pin out once again

[@iamamaker7096]

Thank you.)

[@SobhitPanda]

Your Welcome

[@ke7uia]

I run the linux version of Arduino IDE. I press the button, insert the cable, There is NO port available. ???? I am not able to upload any program. I can upload programs with Thonny, without any problems.

[@SobhitPanda]

Let me try it at my desk. I will let u know a way out.

[@_Khayyam_987_]

Hi. i want to use MPU6050 module with Raspberry Pi Pico board and code on Arduino IDE. I just want to know that, how can i set my SDA and SCL pins in code? Ordinary Arduino i2c choose SDA - A4, SCL - A5. But i use GPIO0 and GPIO1 for SDA and SCL.

[@rickmorris3580]

When I plug in my pico it shows up as a disc driver (not a COMM port). RPI-RP2 (D:). Given this I can't do anything. I did try using this with a Thonny IDE which required me to copy a UF2 file onto the D drive (pico). That may be how I got into this situation. Any ideas how recover so I can use the Arduino IDE? I'm using Windows 8

[@paulobraz6117]

I have the same problem, did you manage to solve it?

[@vincentvidal3305]

Hi @sobhit thanks for video. All fine except when you try, after modification, to upload the program again, on my 1.8.15 IDE I get "An error occurred while uploading the sketch" and unfortunately the same if I open another sketch, we need to disconnect then BootSel + Connect to upload a modified program or new ! Pity ...

[@SobhitPanda]

Actually, it works sometimes and sometimes doesn't

[@SobhitPanda]

I am seriously thinking to get an Arduino RP2040 CONNECT right now 😂

[@SobhitPanda]

And one more thing. Please try it with Arduino 2.0

[@SobhitPanda]

And are you my Subscriber 😁?

[@shubhamchauhan4419]

Hey man, good video, i tried everything is working except i'm not able to open serial monitor and second code after uploading the first one.. could you give me some advice?

[@SobhitPanda]

Thanks buddy ❤️. Alright, either you r using older arduino ide and if second code doesn't work, disconnect the pico and connect it again by pressing the boot sel button.

[@shubhamchauhan4419]

@@SobhitPanda I'm using IDE 1.9.0 beta on windows 8.1

[@ashutoshgupta446]

Dear friend , Can we program PICO by Python using Arduino IDE

[@SobhitPanda]

You can use Thonny IDE, Micropython

[@mcpelaskere4627]

Tutorial pleaseee

[@SobhitPanda]

It is the tutorial 😁. Thanks for commenting ❤️ Hope you Subscribe 😊

[@BrettCooper4702]

normalise your sound, the music level was nasty

[@SobhitPanda]

Thanks for your valuable suggestion❤️. I would keep that in mind from next time ☺️. Hope you subscribe 😁