Smaart Operator Fundamentals Online: 7 - Transfer Function Pt 2: Making Measurements

  Рет қаралды 25,579

Rational Acoustics

Rational Acoustics

Күн бұрын

Пікірлер
@thinbillysound
@thinbillysound 4 жыл бұрын
Really great series of videos. You mention 'more than 6 people' turning up, I have been watching these after the live webinar and I massively appreciate them even though I don't show up as a live viewer. Thank you for taking the time to do these, I attended a course a few years ago, but it is really helpful to refresh these skills and have them explained from a different perspective by another professional.
@RationalAcoustics
@RationalAcoustics 4 жыл бұрын
Thanks for the kind words! Glad you are able to watch and benefit from the material!
@jayceondean3768
@jayceondean3768 3 жыл бұрын
instablaster
@kyleanderson415
@kyleanderson415 4 жыл бұрын
Thanks Jamie and everyone for these webinars!
@Djslyfox1SlyFoxSoundSystem
@Djslyfox1SlyFoxSoundSystem 4 жыл бұрын
Does the eq latency set automatically before you turn on the measurement? Or how is this latency found since the tracker was off? Around 1:07:45
@RationalAcoustics
@RationalAcoustics 4 жыл бұрын
The delay values are the most recent setting - they will stay there until you change them. Jamie had run those measurement engines before the session started, so those were the previously set values.
@TJF97
@TJF97 2 жыл бұрын
Would you ever consider making a video in which you deploy, measure, and tune a (single) loudspeaker in a room, for demonstration purposes?
@johnwallace1012
@johnwallace1012 4 жыл бұрын
"Pink Noise is the mating call of the vacum cleaner. "
@EltonBear
@EltonBear 4 жыл бұрын
And "Just letting the dBs out of the system". Classic.
@wezley5150
@wezley5150 4 жыл бұрын
Thats the most truthful statement I've heard in 2020
@devverma7411
@devverma7411 Жыл бұрын
in 12.12 Sec how do you turn on your measurements.?
@kultube4686
@kultube4686 3 жыл бұрын
How can i measure the output of my EQ? For example: Mixeroutpt Stereo into a Driverack 2 in and 4 Out to Poweramps (2XTop 2XBass). Do i use a y Cable? And do i have to use 2 y Cables one for low outpit and one for Mid/High Output? What if i use a LAB IPD2400 where the DSP is inside the Amp?
@RationalAcoustics
@RationalAcoustics 3 жыл бұрын
Hi Kul - Please contact us at support@rationalacoustics.com and a member of our applications team will be happy to help you.
@umeshkahar4912
@umeshkahar4912 Жыл бұрын
Im joining
@АндрейКлючков
@АндрейКлючков Жыл бұрын
The best❤
@EltonBear
@EltonBear 4 жыл бұрын
More than 6 people watching later too! I need to be able to rewind at take notes ...
@argestrushiti1702
@argestrushiti1702 4 жыл бұрын
👍
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Everything You Need to Know About Control Theory
16:08
MATLAB
Рет қаралды 587 М.
Smaart Data Modeler Getting Started Overview
6:59
Rational Acoustics
Рет қаралды 8 М.
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН