⚫️ Raw - Airbrushing Skulls with AirShot templates.

[@kenney8656]

Wow! You make it look so easy, love watching you create!

[@AirbrushAsylum]

Thank you much appreciated 😜

[@eribertoacedo9505]

Can’t get enough of your artwork today going to your website check it out, then to stencils and check out paints, my canvas will be my Hot Rod, I dig your talent, You have a follower..🕶

[@ianhadden859]

Looks fantastic mate👍

[@brianlee9110]

What I love about airbrush is the art starts off as blurry to me... but as time goes by the airbrush brings it into focus

[@duicudacian2122]

Great work of art....the magic of white and black...rock on! \m/

[@AirbrushAsylum]

many thanks

[@fpvrcstuff]

Another amazing tutorial, even with all the issues you had it still turned out FANTASTIC!

[@AirbrushAsylum]

Thank you glad you enjoyed the video 👍🏻

[@jeffleblanc8850]

They look so much better black and white on black like you say the red candy one was nice but looked way better with the colors you used black and white or sepia also looks awesome I’ve been a tattoo artist for 35 years and I never get sick of skulls and you can take the same skulls and do them a 1000 different ways that’s what I love about them great videos I’m learning slowly it’s hard to get used to moving trigger back and forth but starting to get the hang of it I do a hour or two a day just playing around doing all the basic stuff safer strokes dots al that stuff I’ve always wanted to learn and it’s now or never and I’m hell bent great videos keep them comming thank s

[@AirbrushAsylum]

Thanks appreciate it and yes, agree I don’t get sick of skulls either 👍🏼

[@frankmcalinden8090]

Nice work Carsten !!!!

[@AirbrushAsylum]

Thanks mate 😜👍🏼

[@dawndurantos1134]

You have no idea how glad I am you shared the issues you was having. I was having the same issues and couldn't fix it for the life of me. Ended up going out and getting an Iwata Neo, one of the trigger ones. Brought it home fell in love and couldn't believe the detail I was getting with my black. Then changed to white and bam same issue I was having before. Finally found out white is issues for everyone. Yet for years I've never seen white issues in videos nor has it been for me because I didn't use it much. Mostly I used my airbrush with color, until I was commissioned to do a grim reaper on a glove box. It's done now and looks great which I attribute to the Iwata. Then today seeing you have the same issues with the white was so great. Now I can expect it. Thanks again for keeping it raw.

[@AirbrushAsylum]

No probs and thanks so much for your comment and feedback and glad the ‘raw’ format helps. Yes, white is always a problem but you can definitely make it perform a little better by straining your paint and keeping it reduced nice and thin...only prob then is you need to go over your strokes numerous times to get maximum opacity, that said I prefer that then putting up with stacks of tip drying lol 👍🏼

[@bonnivilleblackcherry9745]

@@AirbrushAsylum have you tried other brands of paint? I am a fan of HOK but i have heard so many local guys gave up on it because they didn't like how it sprayed.

[@AirbrushAsylum]

Bonniville Black Cherry yes I have and still use HOK occasionally that said waterbased paints have come so far now that I prefer using them overall 👌🏻

[@leighsheltonnoseypottercom]

your a great teacher very inspiring

[@AirbrushAsylum]

Many thanks 🙏🏻

[@leighsheltonnoseypottercom]

@@AirbrushAsylum your welcome mate

[@gaamcollection-gabriel1439]

Great video. ...love the raw aspect of it. Obviously the issues you were having with the airbrushes were frustrating for you but they were definitely very helpful for any beginners watching to see that even an expert such as yourself experiences these types of situations. Keep up the awesome videos! 👍👍👍

[@AirbrushAsylum]

Thanks appreciate the comment and glad that my dramas with the brushes have helped share some positivity to all the newbies to the airbrushing world 👍🏼😜

[@impendingdoom385]

Wow! Incredible!

[@AirbrushAsylum]

Thanks 🤘🏻

[@rickcox1495]

That is SWEET id LOVE to have that panel. Signed and cleared.

[@AirbrushAsylum]

Many thanks , I am planning on selling a few of my panels soon was thinking of putting them on my website for sale...appreciate the comment and compliments on my work. If you are interested in this particular one feel free to email through your details and I will take a look for you [e-mail] 👌🏻🙏🏻

[@Bob-mp3td]

Awesome, thanks for sharing your artworks 👍

[@AirbrushAsylum]

No probs thanks for watching 👍🏼

[@martyW347]

AWESOME JOB MATE!!

[@eribertoacedo9505]

Hello OZ from Ramona California clogged air brush no big deal happens to me quite a bit enjoying your Talent also saving all your work by the way as reference to practice your artwork very impressed, Thank You From Ramona California🕶

[@AirbrushAsylum]

Many thanks glad to hear that you are enjoying my videos , sorry to hear about the clogged airbrush but that’s all part of the fun lol 👍🏻

[@eribertoacedo9505]

Hello again would like to say I put BBs with my paints helps keep them agitated prior to using them.again thanks for your videos from Ramona California🕶

[@AirbrushAsylum]

Many thanks and appreciate the comment and no probs re videos I love making them 👌🏻👍🏻

[@johnspivey1177]

It. Is ok you are a hell of a artist

[@hippiemiller]

Bad ass well done

[@AirbrushAsylum]

Thank you 🙏🏻

[@jordanjones2046]

Awesome!

[@AirbrushAsylum]

Thank you 👍🏼

[@MrGrendel65]

awesome work

[@AirbrushAsylum]

👊🏻👍🏼

[@spyuggy]

I get problems with my airbrushes, especially when using white, so this was a great tutorial, as the finished artwork looks great

[@AirbrushAsylum]

Thanks and glad it helped 👍🏼

[@supermob33]

White is ALWAYS tough.. I've recently started using TAMCO Intensity Chalk White (although it IS urethane..NOT waterbased like in this video..) It is BY FAR the best white I've ever used!! Keep on Sprayin' MOB

[@TowMansBuilds]

Awesome work

[@AirbrushAsylum]

Thanks mate 👊🏻👊🏻

[@OlKutty]

50,000 different opinions on which airbrush to purchase for beginners. Just starting my research, and it already seems you need at least 2, one for laying down primer or clear coat, and one for more detail oriented work. What would be your purchase if you could only buy one right now? It seems I’m leaning towards the badger patriot 105?

[@OlKutty]

Btw, subbed.. Awesome work! Thank you for sharing.

[@AirbrushAsylum]

Many thanks for your comment and appreciate you subbing 🙏🏻 in regards to which airbrush I would recommend , I would say that if you are willing to spend the $ then I would say a iwata cmsb see following affiliate link amzn.to/2KfY5q1 or if you wish to spend less than $200 then I would recommend the HPCS eclipse which you can also view or purchase using the following affiliate link amzn.to/2wtufpy hope that helps, 👍🏻 I am sure the badger would be great as well but I personally prefer iwata 😜

[@DisVietVetUSA]

Airbrushes have a personality all there own, they are G'Day mate airbrushes

[@AirbrushAsylum]

Yes, they most certainly do appreciate the comment 👌🏻

[@54rickyg]

yes that would be a good idea to sell some of the original air brushig that you do

[@rogueoutandabout]

Those airbrushes seem to have a little performance anxiety! Great video and on the that some of the beginners don't understand with the stencils is how you used them to fade the edges into the background. You did a great example of that here. One question I have unrelated is when do you use pre/post cleaner vise wax and grease remover? Thanks again! Don

[@AirbrushAsylum]

Thanks for your comment and yes, those brushes gave me some trouble that day 😬 I use both a waterbased and solvent degreaser to make sure I remove all contaminants and ensure that I have a clean surface to work on, hope that helps 👍🏼

[@johnnysantanajunior9689]

beautiful

[@AirbrushAsylum]

Thank you 😜

[@aunicaliberdadeedopensamento]

Parabéns pelo trabalho! Admiro muito sua arte!

[@AirbrushAsylum]

👍🏼😜

[@brianjohnson4186]

If ur back groumd wasnt black would u still use black to fog in ur stencil

[@AirbrushAsylum]

You could use a transparent black with less intensity so that you can further render once you begin adding more details 🤘🏻

[@mindtrpr]

What do you use to clean the surface when using water based paints before clear coats? Awesome work and great tutorial videos

[@AirbrushAsylum]

Thanks for your comment we clean all our surfaces with waterbased prep wash first then solvent based wax and grease remover, hope that helps 👍🏼

[@marcelopazminoruiz3219]

Mis respetos, EXCELENTE!!!

[@toppertruthio]

nice work...is it in water based paint ,or do you use oil based for this kind of work?if its on cars ,bike tanks etc

[@WR-yo8ir]

Thank you, for all the good tips. A question. When painting details how do you mix the black color. you do not use carbon black color, or? Just think it's so easy to kill the subject with too dark color. Chris 🇸🇪

[@AirbrushAsylum]

I reduce the black and mix it with transparent base to take the edge off it, alternatively I may also add a few drops of brown or blue to the black 👍🏼

[@WR-yo8ir]

Thanks for your reply.

[@hillbillybassfisherman8181]

amazing what you can do with only black an white paint

[@MrStringybark]

I just got an air brush kit but want to know will I have an overwhelming urge to paint skulls forever once I start?

[@AirbrushAsylum]

Yes....you most definitely will 💀👊🏻🤘🏻

[@MrStringybark]

Unfortunately the next door neighbours had to be sacrificed in the pursuit of art as I had no skulls to refer to other than online 2 dimensional ones. Shame really, they were quite nice people.

[@AirbrushAsylum]

Lol 😂🙌🏻👊🏻💀

[@jakeburley2245]

I would like to purchase an origional, how do we make that happen

[@AirbrushAsylum]

Here is a link to some Art of ours for sale : www.airbrushasylum.com.au/store/c93/AIRBRUSH-ART-FOR-SALE If there is anything specific you are after or you can’t find it here then feel free to get in contact and I will help you out 👍🏻😉

[@265chevy]

Came out really cool.can you buy those stencils in the U.S.A. just curious

[@AirbrushAsylum]

Yes, go to AirShot stencils and they can help you out 👍🏼

[@alhussainy27]

Where i can get this plans for skulls

[@AirbrushAsylum]

AirShot templates are available from their website www.airshotstencils.com hope that helps 👍🏼

[@autisticplane8066]

Where did you get the skull template? It is not in your online store.

[@AirbrushAsylum]

We are looking at stocking them soon, until they become available on our website you can pick them up at AirShot stencils. Hope that helps 👍🏼

[@theozman38]

I have a pic on my phone almost exactly like that. How do I send you a pic that I’d like you to paint. ??

[@AirbrushAsylum]

Thanks for your message best thing if you want to get info on commissioning me for any artwork would be to fill in our online enquiry form at : www.airbrushasylum.com.au/contact.html Cheers 👌🏻👍🏻

[@loaded68mustang]

What are the "panels" and where can I get some?

[@AirbrushAsylum]

They are Aluminium composite panels and should be available from your local sign supply shop 👍🏼

[@AirbrushAsylum]

Just found a affiliate link on amazon which may be helpful if you are still trying to find Aluminium composite panels : amzn.to/2CSdg5z

[@airshotstencils7135]

Heres the stencil featured in this video

[@kadirtorres9233]

What PSI do you use ?

[@AirbrushAsylum]

It varies from 5-40psi check out our vid explaining this in more detail 👍🏼

[@d.d.b.5228]

I find around 15 psi - 20. You have play around with your reducer use 4012 its great stuff and there is no formula really just dont over reduce your paint play around with the psi and youll get it. White is hard sometimes to work with just keep your tip clean offten. I find the best paints are house of colour and the reducers that go with the products. I have never used any other paints than house of colour. This is an excellent video of how to push and pull your shades and shadows and your high lights. Remember there are no mistakes in airbrushing you can always go back and fix it or leave it for a distress look. This is a great template but you can render your own single skulls yourself and get your own thing going. When painting remember where your light source is coming from. That how you render shadows to push and pull white and black. Its a great video.

[@frankie352]

Do you guys have a discord??

[@davidorme5655]

That's killer IV learnt heaps watching asylum

[@AirbrushAsylum]

Thank you glad you enjoyed the vid and found it helpful 👍🏻

[@robertkinholt621]

Reduce your paint more it'll stop that skipping and plugging up

[@AirbrushAsylum]

Yep that’s one way to solve it 👍🏼